Home Companies IMAX Power Technology Co.,Ltd

600W 24 Volt Industrial AC DC Enclosed Power Supply PFC GB4943

Active Member

Contact Us

[China]

Address: 5th Floor, Building B10, Fuqiao 2nd Industrial Zone, Fuhai Street, Bao'an District, Shenzhen

Contact name:Coco

IMAX Power Technology Co.,Ltd

600W 24 Volt Industrial AC DC Enclosed Power Supply PFC GB4943

Country/Region	china
City & Province	shenzhen
Categories	Fuses

Product Details

600W Ac Dc Power Supply with PFC function enclosed type power supply

Descriptions

LMF600-20Bxx series is one of Mornsun’s enclosed AC-DC switching power supply.It features universal AC input and at the same time accepts DC input voltage,cost-effective, low no load power consumption,high efficiency, high reliability and double or reinforced insulation.
These converters offer excellent EMC performance and meet IEC/EN/UL62368, EN60335, EN61558, IEC/EN60601, GB4943 standards and they are widely used in areas of industrial,LED,street light control,electricity,security,telecommunications,smart home etc.

Features

Universal 80 - 277VAC or 110- 390VDC Input voltage
Accepts AC or DC input (dual-use of same terminal)
Operating ambient temperature range: -40℃ to +70℃
Low standby power consumption, high efficiency, active PFC
High I/O isolation test voltage up to 4000VAC
The base plate with conformal coating
Output short circuit, over-current, over-voltage over-temperature protection
Remote sense compensation, remote ON/OFF function
DC_OK function
With 5V/1A standby power
Operating altitude up to 5000m

Specifications

Selection Guide
Certification	Part No.	Output Power (W)	Nominal Output Voltage and Current (Vo/Io)*	Output Voltage Adjustable Range (V)	Efficiency at 230VAC (%) Typ.	Max. Capacitive Load (µF)	Remote Sense Compensation (mV)	Standby (Vo/Io)*
EN/CCC	LMF600-20B12	600	12V/50A	11.8-12.6	92	6000	500	5V/1A
	LMF600-20B15		15V/40A	14.7-15.8	92	6000
	LMF600-20B24		24V/25A	23.5-25.2	94	4000
	LMF600-20B27		27V/22.3A	26.4-28.4		4000
	LMF600-20B36		36V/16.7A	35.3-37.8		2400
	LMF600-20B48		48V/12.6A	47.0-50.4		1600
Note: 1.Under any conditions, the total power of the product should not exceed the 600W rated power, and the output current cannot exceed the rated output current; 2.Standby power: provide 5V/1A independent output, it is recommended to use with the main circuit.

Input Specifications
Item	Operating Conditions		Min.	Typ.	Max.	Unit
Input Voltage Range	AC input		80	--	277	VAC
Input Voltage Range	DC input		110	--	390	VDC
Input Voltage Frequency			47	--	63	Hz
Input Current	115VAC		--	--	7.5	A
Input Current	230VAC		--	--	3.5
Inrush Current	230VAC	Cold start	--	40	--
Power Factor	115VAC	Full load	--	0.98	--	--
Power Factor	230VAC	Full load	--	0.95	--	--
Leakage Current	240VAC		＜0.1mA
Hot Plug			Unavailable