Home Companies IMAX Power Technology Co.,Ltd

24V 600W Industrial Power Supply 220VAC DC Power Supply

Active Member

Contact Us

[China]

Address: 5th Floor, Building B10, Fuqiao 2nd Industrial Zone, Fuhai Street, Bao'an District, Shenzhen

Contact name:Coco

IMAX Power Technology Co.,Ltd

24V 600W Industrial Power Supply 220VAC DC Power Supply

Country/Region	china
City & Province	shenzhen
Categories	Switching Power Supply

Product Details

600W Ac Dc Power Supply enclosed type power supply

Descriptions

LM600-12Bxx series is one of Mornsun’s enclosed AC-DC switching power supply.It features AC input and at the same time accepts DC input voltage,cost-effective,low no load power consumption,high efficiency and high reliability.

These converters offer excellent EMC performance and meet IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, GB4943 standards and they are widely used in areas of industrial,LED,street light control,electricity,security,telecommunications,smart home,etc.

Features

Input voltage Range: 176 - 264VAC or 240 - 370VDC
Accepts AC or DC input (dual-use of same terminal)
Operating ambient temperature range: -20℃ to +60℃
LED indicator for power on
Operating up to 5000m altitude
Over-temperature protection, output short circuit, over-current, over-voltage protection
Built-in DC fan
Remote sense function

Specifications

Selection Guide
Certification	Part No.*	Output Power (W)	Nominal Output Voltage and Current (Vo/Io)	Output Voltage Adjustable Range (V)	Efficiency at 230VAC (%) Typ.	Max. Capacitive Load (µF)
EN/CQC	LM600-12B12	600	12V/50A	10-13.5	85	3000
	LM600-12B15	600	15V/40A	13.5-16.5	86	3000
	LM600-12B24	600	24V/25A	22-26.4	87	1000
	LM600-12B27	599.4	27V/22.2A	24-30	87	1000
	LM600-12B36	597.6	36V/16.6A	32-40	87	1000
	LM600-12B48	600	48V/12.5A	43-56	88	1000
Note: *Use suffix “Q” for conformal coating.

Input Specifications
Item	Operating Conditions		Min.	Typ.	Max.	Unit
Input Voltage Range	AC input		176	--	264	VAC
Input Voltage Range	DC input		240	--	370	VDC
Input Voltage Frequency			47	--	63	Hz
Input Current	230VAC		--	7.5	10	A
Inrush Current	230VAC	Cold start	--	60	--	A
Leakage Current	240VAC		--	--	2	mA
Hot Plug			Unavailable

Output Specifications
Item	Operating Conditions		Min.	Typ.	Max.	Unit
Output Voltage Accuracy	Full load range		--	±1	--	%
Line Regulation	Rated load		--	±0.5	--
Load Regulation	0% - 100% load
Output Ripple & Noise*	20MHz bandwidth (peak-to-peak value)	12V/15V/24V/27V	--	150	--	mV
		36V/48V	--	200	--
Temperature Coefficient			--	±0.05	--	%/℃
Minimum Load			0	--	--	%

Hold-up Time	230VAC	--	20	--	ms
Short Circuit Protection	Recover time <3s after the short circuit disappear.	Hiccup, continuous, self-recover
Over-current Protection		105%-180% Io, self-recover
Over-voltage Protection	12V	≤16.2V (Hiccup, self-recover)
	15V	≤21V (Hiccup, self-recover)
	24V	≤32.4V (Hiccup, self-recover)
	27V	≤36.5V (Hiccup, self-recover)
	36V	≤50V (Hiccup, self-recover)
	48V	≤60V (Hiccup, self-recover)
Over Temperature Protection*	Over-temperature Protection Activation	--	--	70		℃
	Over-temperature Protection Deactivation	40	--	--
Remote Sense	Total compensate voltage (RS+/RS- shorted to Vo+/V0- respectively)	--	0.5	--		V
Note: 1.The “Tip and barrel method” is used for ripple and noise test, output parallel 47µF electrolytic capacitor and 0.1µF ceramic capacitor, please refer to Enclosed Switching Power Supply Application Notes for specific information; 2.Over-temperature Protection needs to be tested under rated full load conditions.