|
[China]
Trade Verify
Address: Room 202, Building 4-2, No. 539, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou, Guangdong
Contact name:Tessa Huang
Guangzhou HongCe Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
Assembly Security Tester
HF-01
Products Introduction:
This test apparatus is designed and manufactured according to the standard requirement of UL498 Cl. 118 assembly security test figure 118.1~118.5. It is used To Check Assembly Security Of The Flush Receptacle Having 5-15r, 5-20r, 6-15r, 6-20r Configuration.
The test device is easy to be operated, the test times (up to 9999 times) can be preset, the test speed is adjustable. When the display value of test times reaches the preset value, the test will stop automatically.
Technical Parameters:
| Parameters Name | Parameter Data | Remark |
| Input supply | AC120V±10%, 60Hz | |
| Power | 500W | |
| Test station | Single | |
| Moving method | Pneumatic + weight | |
| Counter | 0~9999 times, adjustable | |
| Timer | 0~9999s, adjustable | |
| Weight | 220N one piece |
Overview of Control System Functions:
Connect to compressed air:
Connect the compressed air to the inlet of the pressure regulator, shown as below picture:
Drainage of gas line:
Compressed air contains moisture, the moisture will be turned into water and accumulated in the pressure regulator cup after a period of time, operator can press the waterproof valve of the cups to drain out the water:
Functions of the control panel:
