Home Companies Guangzhou HongCe Equipment Co., Ltd.

Ceramic Material Fuchsin Methylated Spirit Solution Pressure Test Equipment 15MPa

Guangzhou HongCe Equipment Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Room 202, Building 4-2, No. 539, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou, Guangdong

Contact name:Tessa Huang

Inquir Now

Guangzhou HongCe Equipment Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Ceramic Material Fuchsin Methylated Spirit Solution Pressure Test Equipment 15MPa

Country/Region china
City & Province guangzhou guangdong
Categories Welding Tips
InquireNow

Product Details

Ceramic Material Fuchsin Methylated Spirit Solution Pressure Test Equipment 15MPa

 

This test apparatus is design and manufactured according to standard IEC 60335-1 clause 22.32, GB 4706.1 clause 22.32. It is use to determine if ceramic material is tightly sintered, consists of two parts: test container and pressure boosting device magenta.

 

The ceramic material is broken into pieces that are immersed in a solution containing 1 g of fuchsine in each 100 g of methylated spirit. The solution is maintained at a pressure not less than 15 MPa for a period so that the product of the test duration in hours and the test pressure in megapascals is approximately 180.

 

The pieces are removed from the solution, rinsed, dried and broken into smaller pieces.

 

The freshly broken surfaces are examined and shall not show any trace of dye visible to the naked eye.

 

Technical Parameters:

 

Item NameParameters
Power supplyAC 230V 50Hz
Power3KW
Test pressure0.5~20MPa±0.5MPa
Test completion reminder time3min
Test time1-99hour
Container bottle450ml
Pressure relief wayAutomatic relief
Dimension (LXWXH)1200mmX450mmX1500mm
 
 
Test Steps:
 
  1. connect to proper power supply, turn power switch on;
  2. press【BOLT PARA】button, make the motor rotate, and the pressure relief bolt alignment to pressure hold handle hole. Then insert the bolt into handle hole;
  3. adjust the test pressure, rotate the red handle, pull the red electric contact pointer, so that the pointer stopped in the test pressure scale.
  4. Set test time
  5. Press【START】to start up test, when the pressure is reached, the black pressure indicator and the red pointer coincide, began to maintain pressure, when test time reach buzzer alarm, automatic pressure relief.
  6. Test completed, turn power off, open the container bottom and inspect the test sample

Hot Products

IEC60811 - 1 - 2 Oxygen Bomb Aging Tester IEC Test Equipment For Wire And Cable Standard: IEC60811-1...
Touch Current Measuring Circuit Figure 5 Network Of IEC 60990 For Leakage Product description: This ...
IEC60335 Testing Equipment Of Plc Control System 1000mm Adjustable Automatic Cord Reels Endurance ...
Plastic Oxygen Index Method Test Equipment ISO4589-1 Burning Behaviour Testing Machine Standard It ...
EVA Water Filled Teether Machine Automatic Water Filled, Automatic Sealing,Cutting, 7 Inch Color ...
IEC60255-5 Test Equipment Impulse Voltage Test Generator Parameters: Output voltage 12kV (Max) ±5% ...