|
[China]
Trade Verify
Address: Room 202, Building 4-2, No. 539, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou, Guangdong
Contact name:Tessa Huang
Guangzhou HongCe Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
Abrasion Strength Resistance Test Machine HJ0604
Description:
This device is used to process scratch test for the solid insulation boards and accessible parts of house appliances and similar products, to ensure that accessible parts of solid insulation shall have sufficient strength to prevent penetration by sharp implements.
Confirm to Clause 21.2 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements, IEC 60950 clause 2.10.8.4, and etc.
Technical parameters:
| Test object | Household appliances, printed circuit board |
| Reference standard | IEC 60335-1 |
| Test | Abrasion Strength Resistance Test |
| Power supply | 220V AC 50HZ |
| Control | PLC control, 7-inch color touch-screen operation, stepper motor driver |
| Station | 1 |
| Scratch Pin | Rounded with a radius of 0,25 mm ± 0,02 mm |
| The end of Scratch Pin | Form of a cone with an angle of 40° |
| Scratching Speed | 20±5mm/s, can be preset |
| Scratching Force | 10N±0.5N |
| Scratches Distance | 0-50mm, can be preset |
| Scratching Angle | 80-85°, fixed by fixture |
| Test Sample Tray | Can be rotated 90 °, multiple mounting holes for the installation of different samples |
| Optional | 30N±0.5N Load Device |
Test sample: Household appliances, printed circuit board.
Feature:
The surface of the insulation is scratched by means of a hardened steel pin, the end of which has the form of a cone with an angle of 40°. Its tip is rounded with a radius of 0,25 mm ± 0,02 mm. Scratching through five pairs of conductive parts, including its interval, an interval should be subjected to the largest part of the potential gradient during the test. And the pin is held at an angle of 80°~ 85° to the horizontal and loaded so that the force exerted along its axis is 10 N ± 0,5 N. The scratches are made by drawing the pin along the surface of the insulation at a speed of approximately 20mm/s±5mm/s. Two parallel scratches are made. They are spaced sufficiently apart so that they are not affected by each other, their length covering approximately 25 % of the length of the insulation. Two similar scratches are made at 90° to the first pair without crossing them.
The scratches shall be at least 5 mm apart and at least 5 mm from the edge of the specimen.
The device adopts PLC + touch screen control system, stepping motor drive, the scratch distance, scratch times and speeds can be preset, the test pin can rotate 90 ° angle automatically, scratch test in both vertical and horizontal directions can be easily realized.
About us :
HongCe Equipment Co., Ltd is a leading company in inspection equipment industry, established in 2003 and located in Guangdong, China. Our company introduced advanced equipment, combined with the most advanced technology production processes, strict quality control system to control the entire process of production. The company combined with a number of high-tech management personnel and advanced equipment, and together with the modern management, computer design and control, our products has reached the international advanced level. The company set R&D design, production, sales as one, specializing in producing electric wire inspection equipment of plug and socket, mechanical robustness testing equipment of electronics, inspection equipment of electronics’ on-fire danger, testing indicator of anti-electric shock and solid objects' entry, general inspection equipment, and other non-standard testing equipment. Our products enhance good selling at home and abroad, and have established supply relationships with a number of well-known companies.
