|
[China]
Trade Verify
Address: Room 202, Building 4-2, No. 539, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou, Guangdong
Contact name:Tessa Huang
Guangzhou HongCe Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
Cold Bending Test Machine HDX1307
Technical parameters:
Station:2
Diameter of samples:Φ2.5mm ~12.5mm
The number of turns:2 to 10 turns, and the number of turns shall be as specified in the following table:
| Overall diameter (d) of the test piece (mm) | Number of turns |
| D≤2.5 | 10 |
| 2.5﹤d≤4.5 | 6 |
| 4.5﹤d≤6.5 | 4 |
| 6.5﹤d≤8.5 | 3 |
| 8.5﹤d | 2 |
Test condition: The diameter of the mandrel shall be between 4 and 5 times the diameter of the test piece. Standard equip with the mandrel :Ф4, Ф5, Ф6, Ф7, Ф8, Ф10, Ф12, Ф14, Ф16, Ф18, Ф20, Ф24, Ф37.5mm
Rotation speed: 5S/ turn, manual control
Diameter of pipe: Ф3.5, Ф6, Ф10, Ф12, Ф16mm, each of two pieces
Description:
This device is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a major axis dimension up to and including 20 mm.
According to the standard IEC60811-1-4 clause 8.1 and 8.2, common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for general application-Test at low temperature.
Test sample: Cables with an overall diameter up to and including 12.5 mm, or for flat cables, a major axis dimension up to and including 20 mm.
Feature: Made of stainless steel, 2 stations, equip with the extended handle which can be connected to the outside of the low temperature chamber.
