Dongguan Kingpo Technology Limited |
Verified Suppliers
|
IEC60529 IPX1 IPX2 Tester Ingress Protection Testing With Water Filtration Unit
Product information:
This test device is to verify Protection against Vertically Falling
Water Drops. It is designed and manufactured in accordance with the
standard requirement of IEC60529 clause IPX1 and IPX2.
The rise and fall of the drip box is controlled by the motor. It is
equipped with the rotatable objective table whose rotating speed is
1r/min for IPX1 test;It is also equipped with 15°bevel for
supporting sample for the IPX2 test. What’s more, this device is
with the clean water filtration unit which can prevent pinhole from
jamming.
Technical parameters:
No. | Item | Parameter |
1 | Power supply | Single phase AC220V,50Hz |
2 | Water supply | Water flow rate>10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit |
3 | Water tank size | L*W*H=1100×800×350mm |
4 | Drop test area | L*W*H=1000×600mm,customizable |
5 | Drop height | 200mm~1650mm adjustable |
6 | Dripping speed (water flow) | 1+0.05 0mm/min or 3+0.05 0mm/min (Switchable) |
7 | Water hole | Φ0.4mm |
8 | Distance between holes | 20mm |
9 | Diameter of rotary table | Φ600mm |
10 | Rotating speed of the rotary table | 1r/min |
11 | Load bearing of the rotary table | ≤15Kg electrical equipment (without rotary column) |
12 | 15°bevel for supporting sample | 15°bevel |
13 | Site requirements | Dedicated IP waterproof test room,The ground should be flat with
illumination 10A waterproof leakage switch(or socket)used for equipment |
14 | The area | L*W*H=1500mm×1500mm×2650mm,the size can be customized by the customers’ need. |