Results foriec60335 test finger probefrom 4948 Products.
|
|
Rigid Finger 1 Ø50mm, 20mm wide, 100mm long
|
|
|
|
|
Test Probe HT-I33 Standard:IEC60335-2-14. Application:The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. Test sample...
|
|
|
|
|
UL1278 Fig 10.2 Bar Probe Product details: It conforms to standard requirement of UL1278 Fig 10.2. The handle is made of nylon and the probe is made of stainless steel. Standard...
|
|
|
|
|
Product Description The Rigid Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It ...
|
|
|
|
|
Articulate Probe With Flat And Cone Shaped Hand 10.5 – 11.5 Year Age Standard: UL 60335-2-24 Household and Similar Electrical Appliances – Safety – Part 2-24: Particular Requiremen...
|
|
|
|
|
IEC60065 Test Hook for Audio and Video Made by 304 Stainless Steel 1. Introduction The test hook is designed according to IEC60065 clause 9.1.7 and figure 4. It is mainly applied ...
|
|
|
|
|
Finger Nail Probe Model TPFN: Finger Nail Probe For testing the requirement of snap-in devices and snap together enclosures that protect the user from accessibility to hazardous ...
china
|
|
|
|
|
UL Enamel Wire Probe 25 Usage: This probe is use to checking access to enamel coated wire accord to UL standard requirement. stainless steel with stainless stell handle.
|
|
|
|
|
Figure 58.5 Test Probe Product details: It conforms to the standard of UL499 Fig 6.4 and UL982-2006 Fig 58.5(PA190). It is applicable for the electrical equipment. The handle is ...
|
|
|
|
|
Articulate Probe With Flat And Cone Shaped Hand 10.5 – 11.5 Year Age Standard: UL 60335-2-24 Household and Similar Electrical Appliances – Safety – Part 2-24: Particular Requiremen...
|
|
|
|
|
IEC60529 Stainless Steel 2.5mm Test Rod for IP3 and suffix C code Test Introduction: The 2.5mm Test Rod is used to verify the protection of persons against access to hazardous ...
|
|
|
|
|
IEC 60529 Test Sphere50mm , IP1X This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
|
Test Rod With Nylon Handle 100mm Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of ...
|
|
|
|
|
IEC60529 1.0mm Test Wire used for IP4 Code Test with Calibrated Certificate Introduction: Used to verify the protection of persons against access to hazardous parts. Also used to ...
|
|
|
|
|
Test Rubber Ball Usage rubber ball used for dynamic stability testing to UL (USA) standards. A ball, 2 and 3/4/16 inch diameter (2.187 inches), filled with No. 60 core sand. It is ...
|
|
|
|
|
UL398 Fig 8.2 Probe for Film-coated Wire Product information: This probe conforms to standard requirement of UL398 Fig 8.2(PA170B),UL507(PA170D),UL749 Fig 2,UL982 Fig 58.6 and ...
|
|
|
|
|
Steel Test Pin with Nylon Handle as Per BS1363-1 Figure 1 1. Introduction The test pin meets the requirements of BS1363-1 clause 12.6.1 and figure 1.The test pin meets the ...
|
|
|
|
|
Antenna coaxial sockets mounted on the apparatus Antenna coaxial sockets mounted on the apparatus and incorporating parts or components which isolate HAZARDOUS LIVE parts from ...
|
|
|
|
|
UL982 Probe For Uninsulated Live Parts And Film-Coated Wire Length 101.6mm Diameter 19.1 Description in UL982 2009 Clause 58.9.2: In the enclosure of an appliance other than as ...
|
|
|
|
|
Test Plug For Mechanical Tests On Antenna Coaxial Sockets Product information: This test plug conforms to IEC60065 Figure 8 standard requirement. It is used to test the antenna ...
|
|
|
