Active Member
|
[China]
Address: 2A2003, Building 2, Baohuju Garden, 200 Huaqing Avenue, Qinghu Community, Longhua Street, Longhua District, Shenzhen
Contact name:Jack
Shenzhen Huahao Gaosheng Technology Co., Ltd |
|
|
LM2465TA - NATIONAL SEMICONDUCTOR - 150 MHZ I2C COMPATIBLE RGB PREAMPLIFIER WITH INTERNAL 254 CHARACTER OSD ROM, 512 CH
| High Light: | power led driver circuit,led matrix driver ic | ||
|---|---|---|---|
Quick Detail:
150 MHz I2C Compatible RGB Preamplifier with Internal 254 Character OSD ROM, 512 Character RAM and 4DACs
Description:
The LM1236 pre-amp is an integrated CMOS CRT preamp. It has an I2C compatible interface which allows control of all the parameters necessary to directly setup and adjust the gain and contrast in the CRT display. Brightness and bias can be controlled through the DAC outputs, which are well matched to the LM2479 and LM2480 integrated bias clamp ICs. The LM1236 preamp is also designed to be compatible with the LM246x high gain driver family.
Black level clamping of the video signal is carried out directly on the AC coupled input signal into the high impedance preamplifier input, thus eliminating the need for additional clamp capacitors. Horizontal and vertical blanking of the outputs is provided. Vertical blanking is optional and its duration is register programmable.
The IC is packaged in an industry standard 24-lead DIP molded plastic package.
Applications:
- Internal 254 character OSD ROM usable as either (a) 190 2-color plus 64 4-color characters, (b) 318 2-color characters, or (c) some combination in between
- Internal 512 character RAM, which can be displayed as one single or two independent windows
- Enhanced I2C compatible microcontroller interface to allow versatile Page RAM access
- OSD Window Fade In/Fade Out
- OSD Half Tone Transparency
- OSD override allows OSD messages to override video and the use of burn-in screens with no video output.
- 4 DAC outputs (8-bit resolution) for bus controlled CRT bias and brightness
- Spot killer which blanks the video outputs when VCC falls below the specified threshold
- Suitable for use with discrete or integrated clamp, with software configurable brightness mixer
- 4-Bit Programmable start position for internal Horizontal Blanking
- Horizontal blanking and OSD synchronization directly from deflection signals. The blanking can be disabled, if desired.
- Vertical blanking and OSD synchronization directly from deflection signals. The blanking width is register programmable and can be disabled, if desired.
- Power Saving Mode with 65% power reduction
- Matched to LM246x driver and LM2479/80 bias IC’s
Specifications:
| Datasheets | LM2465 |
| Standard Package | 45 |
| Category | Integrated Circuits (ICs) |
| Family | PMIC - Display Drivers |
| Series | - |
| Packaging | Tube |
| Display Type | CRT |
| Configuration | - |
| Interface | - |
| Digits or Characters | - |
| Current - Supply | 36mA |
| Voltage - Supply | 60 V ~ 85 V |
| Operating Temperature | -20°C ~ 100°C |
| Mounting Type | Through Hole |
| Package / Case | TO-220-9 Formed Leads |
| Supplier Device Package | TO-220-9 |
| Other Names | *LM2465TA *LM2465TA/NOPB LM2465TA LM2465TA-ND LM2465TANOPB LM2465TANOPB-ND |
