|
[China]
Trade Verify
Address: Fl12,Tower E XingHe World LongHua District Shenzhen China 518000
Contact name:Sophia
Angel Technology Electronics Co |
|
Verified Suppliers
|
|
|
MCP73833 MCP73834 MCP73837 MCP73838 MCP73837-FCI/MF MCP73837-FCI/UN IC Linear Battery Charger Controller PMIC
Applications:
• Low-Cost Li-Ion/Li-Poly. Battery Chargers
• MP3 Players
• Digital Still Camera
• Portable Media Players
• Handheld Devices
• Bluetooth® Headsets
• USB Chargers
Battery Management IC Product Family Specification:
| Category | Integrated Circuits (ICs) |
| Series | PMIC - Battery Chargers |
| Mfr | Microchip Technology |
| Part number | MCP73833 MCP73834 MCP73837 MCP73838 MCP73837-FCI/MF MCP73837-FCI/UN Full series PMIC |
| Package | Tape & Reel (TR) |
| Part Status | Active |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Current - Charging | Constant - Programmable |
| Programmable Features | - |
| Fault Protection | Over Voltage |
| Charge Current - Max | 1.1A |
| Battery Pack Voltage | 4.2V |
| Voltage - Supply (Max) | 6.5V |
| Interface | - |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN/MSOP |
| Supplier Device Package | Contact us for more |
| Base Product Number | MCP73 |
Microchip is a leading provider of microcontroller, mixed-signal, analog,security
and Flash-IP solutions,as well as a wide variety of other products.
Microchip enable low-risk product development, lower total system
cost and faster time to
market for thousands of diverse customer applications worldwide.
Power management PMIC IC chip full series for available:
| Device Name | Vcc Range (V) | Typical Reverse Leakage Current (µA) | Temp. Range | Voltage Regulation Accuracy (%) | Operating Current Typ (mA) | Reverse Discharge Current Typ (uA) | Supply Current Typ (mA) | Technology | UVLO | Voltage Regulation Typical (V) | Packages |
| MCP73833 | 3.75 - 6.0 | 0.75 | -125 | 0.75 | 2 | 0.2 | 0.75 | Linear | 3.5 | 4.2, 4.35, 4.4, 4.5 | 10/DFN |
| MCP73834 | 3.75 - 6.0 | 0.75 | -125 | 0.75 | 2 | 0.2 | 0.75 | Linear | 3.5 | 4.2, 4.35, 4.4, 4.5 | 10/DFN |
| MCP73837 | 3.75 - 6.0 | 0.5 | -125 | 0.5 | 1.9 | 0.1 | 0.5 | Linear | 3.5 | 4.2, 4.35, 4.4, 4.5 | 10/DFN |
| MCP73838 | 3.75 - 6.0 | 0.5 | -125 | 0.5 | 1.9 | 0.1 | 0.5 | Linear | 3.5 | 4.2, 4.35, 4.4, 4.5 | 10/DFN |
| MCP73841 | 4.5 - 12 | 0.5 | -125 | 0.5 | 0.75 | 0.4 | 0.5 | Linear | 4.45 | 4.1, 4.2 | 10/MSOP |
| MCP73842 | 8.7 - 12 | 0.5 | -125 | 0.5 | 0.75 | 0.4 | 0.5 | Linear | 8.65 | 8.2, 8.4 | 10/MSOP |
| MCP73843 | 4.5 - 12 | 0.5 | -125 | 0.5 | 0.75 | 0.4 | 0.5 | Linear | 4.45 | 4.1, 4.2 | 8/MSOP |
| MCP73844 | 8.7 - 12 | 0.5 | -125 | 0.5 | 0.75 | 0.4 | 0.5 | Linear | 8.65 | 8.2, 8.4 | 8/MSOP |
| MCP73853 | 4.5 - 5.5 | 0.5 | -125 | 0.5 | 0.83 | 0.24 | 0.5 | Linear | 4.45 | 4.1, 4.2 | 16/QFN |
| MCP73855 | 4.5 - 5.5 | 0.5 | -125 | 0.5 | 0.83 | 0.24 | 0.5 | Linear | 4.45 | 4.1, 4.2 | 10/DFN |
| MCP73871 | 4.4 - 6 | 0.75 | -125 | 0.5 | 2.5 | 0.03 | 0.75 | Linear | 4.35 | 4.1, 4.2, 4.35, 4.4 | 20/QFN |
| MIC79050 | 2.5 - 16 | 500 | -165 | 0.75 | 85 µA @ Iout = 100 µA; 11 mA @ Iout = 500 mA; | 10 | 500 | Linear | 0 | 4.2V | 3/SOT-223 |
| MIC79110 | 2.5 - 16 | 1200 | -165 | 0.75 | 2 mA @ Iout = 10 mA;24 mA @ Iout = 700 mA | 6 | 1200 | Linear | 0 | 4.2V, Adj. | 10/VDFN |
| MCP73826 | 4.5 - 5.5 | 1 | -105 | 1 | 0.26 | 8 | 1 | Linear | 4.1, 4.2 | Please call for package information |
Description:
The MCP73113/4 are highly integrated Li-Ion battery charge management controllers for use in space-limited and cost-sensitive applications.
The MCP73113/4 devices provide specific charge algorithms for Li-Ion/Li-Polymer batteries to achieve optimal capacity and safety in the shortest charging time possible. Along with their small physical size, the low number of external components make the MCP73113/4 ideally suitable for portable applications.
The absolute maximum voltage, up to 18V, allows the use of MCP73113/4 in harsh environments, such as low cost wall wart or voltage spikes from plug/unplug.
The MCP73113/4 devices employ a constant current/ constant voltage charge algorithm.
The various charging voltage regulations provide design engineers flexibility to use in different applications.
The fast charge, constant current value is set with one external resistor from 130 mA to 1100 mA.
The MCP73113/4 devices limit the charge current based on die temperature during high power or high ambient conditions.
This thermal regulation optimizes the charge cycle time while maintaining device reliability.
The PROG pin of the MCP73113/4 also serves as enable pin. When high-impedance is applied, the MCP73113/4 will be in Standby mode.
The MCP73113/4 devices are fully specified over the ambient temperature range of -40°C to +85°C.
They are available in a 10-lead, DFN package.
Features:
• Complete Linear Charge Management Controller:
- Integrated Input Overvoltage Protection
- Integrated Pass Transistor
- Integrated Current Sense
- Integrated Reverse Discharge Protection
• Constant Current/Constant Voltage Operation
with Thermal Regulation
• 4.15V Undervoltage Lockout (UVLO)
• 18V Absolute Maximum Input with OVP:
- 6.5V (MCP73113)
- 5.8V (MCP73114)
• High Accuracy Preset Voltage Regulation Through
Full Temperature Range (-5°C to +55°C): +0.5%
• Battery Charge Voltage Options:
- 4.10V, 4.20V, 4.35V or 4.4V
• Resistor Programmable Fast Charge Current:
- 130 mA-1100 mA
• Preconditioning of Deeply Depleted Cells:
- Available Options: 10% or Disable
• Integrated Precondition Timer:
- 32 Minutes or Disable
• Automatic End-of-Charge Control:
- Selectable Minimum Current Ratio:
5%, 7.5%, 10% or 20%
- Elapse Safety Timer: 4 HR, 6 HR, 8 HR or
Disable
• Automatic Recharge:
- Available Options: 95% or Disable
• Charge Status Output-Two Style Options
• Soft Start
• Temperature Range: -40°C to +85°C
• Packaging: DFN-10 (3 mm x 3 mm)
Environmental & Export Classifications
| ATTRIBUTE | DESCRIPTION |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| REACH Status | REACH Unaffected |
| ECCN | 3A991B1A |
| HTSUS | 8542.32.0071 |
Similar products :
14/20-Pin Flash Microcontrollers with XLP Technology microcontroller IC Marking information:
About US
Shenzhen Angel Technology Electronics Co Was Founded In HongKong Since 2006, Our branch Located In The Silicon Valley Of China, Shenzhen.
Shenzhen Angel Technology Electronics Co have have obtained the ISO9001 quality management system certification.
The Mission Of Shenzhen Angel Technology Electronics Co has always been to provide Quality Electronics Components To Manufacturers Worldwide.Angel-tech's vision is become the excellent electronic components supplier with the highest satisfaction between employees and customers. Early On We became the Primary channel for project closures And Inventory build-ups for Major Distributors such as Arrow Electronics and Contract Manufacturers. Angel Technology Electronics Co Has since then added Sourcing Of High Quality Components From Local Manufacturers In China.
