MAX17625ATA+T Switching Voltage Regulators 2.9V-to-5V Input, 1A ,
1.5V-to-3.3V output DC-DC Converter
Maxim Integrated MAX17625 Synchronous Step-Down Converters
Maxim Integrated MAX17625 Synchronous Step-Down Converters have
integrated MOSFETs and compensation components. These operate over
a 2.7V to 5.5V input voltage range. The MAX17625 supports up to
700mA load current and allow the use of small, low-cost input and
output capacitors. The output voltage can be adjusted from 0.8V to
3.3V. When the EN pin is asserted, an internal power-up sequence
ramps up the error-amplifier reference, resulting in output-voltage
soft-start. The FB pin monitors the output voltage through a
resistor divider. The devices select either PFM or forced-PWM mode
depending on the state of the MODE pin at power-up. By pulling the
EN pin to low, the devices enter shutdown mode and consume only
0.1µA (typ) of standby current.