Electrical Flow Control Rexroth Solenoid Valve 24V 3DR10P5-6X 315Y 00M

Solenoid Valve Description

Solenoid valve is an industrial equipment controlled by electromagnetic, is used to control the basic components of automation fluid, belongs to the actuator.

The solenoid valve can be combined with different circuits to achieve the desired control, and the precision and flexibility of the control can be guaranteed. Different solenoid valves play a role in different positions of the control system, the most commonly used are check valves, safety valves, direction control valves, etc.

Operating Principle

Solenoid valve has a closed chamber, open in different positions through the hole, each hole leads to a different tubing, the middle of the cavity is the valve, both sides are two electromagnets, which side of the magnet coil electrified valve body will be attracted to which side, by controlling the movement of the valve body to block or leak different oil discharge holes, and the oil inlet hole is often open, hydraulic oil will enter different drainage tubing, Then the piston of the cylinder is driven by the pressure of the oil, and the piston drives the piston rod, and the piston rod drives the mechanical device. In this way, mechanical motion is controlled by controlling the current of the electromagnet.

Type Selection Principle

Security:

1, corrosive media: plastic king solenoid valve and stainless steel should be selected; For the strong corrosion of the medium must be selected isolation diaphragm type. Neutral medium, it is also appropriate to choose copper alloy as the valve shell material of the solenoid valve, otherwise, the valve shell often has rust chips off, especially in the case of infrequent action. Ammonia valves can not be made of copper.

2, explosive environment: must choose the corresponding explosion-proof grade products, open installation or dust occasions should choose waterproof, dust-proof varieties.

3, the nominal pressure of the solenoid valve should exceed the highest working pressure in the tube.

Applicability:

1. Medium characteristics

1) Quality gas, liquid or mixed state respectively choose different varieties of solenoid valve;

2) The medium temperature of different specifications of products, otherwise the coil will burn, seal aging, seriously affect the service life;

3) Medium viscosity, usually below 50cSt. If this value is exceeded, when the diameter is greater than 15mm, use a multi-function solenoid valve; When the diameter is less than 15mm, use a high-viscosity solenoid valve.

4) When the cleanliness of the medium is not high, the recoil-filter valve should be installed before the solenoid valve. When the pressure is low, the direct-acting diaphragm solenoid valve can be selected;

5) If the medium is directional circulation, and reverse flow is not allowed, two-way circulation is required;

6) The medium temperature should be selected within the allowable range of the solenoid valve.

FAQ

Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.

Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.