Active Member
|
[China]
Address: Room 1109, Loft Office, Green Land International Plaza, No. 275-8 Guoding East Road, Shanghai 200433, P.R. China. (admin(a)shunitesteel.com)
Contact name:Eric
SHANGHAI UNITE STEEL |
|
|
INTRODUCTION
Alloy Steel 5160, also sold as AISI 5160, is a high carbon and chromium spring steel. It offers users outstanding toughness, a high level of ductility, and excellent fatigue resistance. Alloy Steel 5160 is in use in the automotive field in a number of different heavy spring applications, especially for leaf springs. It is important to note that Alloy Steel 5160 can be difficult to weld and machine and may require special procedures.
APPLICATIONS
High yield to tensile strength ration, used for automotive leaf
springs, scrapers, equalizers, bumpers.
5160 makes a very durable tough knife and is suitable for any knife
that needs to hold an edge and be impact resistant such as swords
and bowie knives.
-Delivery Conditions:
Cold drawn: 4-100 mm
Peeled: 30-160 mm
Grinded: 4- 600 mm
Turned: 130-1200 mm
Hot rolled: 12-320 mm
Hot forged: 130-1600 mm
-EAF+(ESR) or EAF+LF+VD+(ESR)
-HOT rolled; Cold rolled; Forged; Cold Drawn
-Heat Treatment: Untreated, Annealing, N+T, Q+T
-Smelting: EAF+LF+VD (+ESR)
-Surface Finish: Black, Rough Machined, Peeled, Turned or upon request
-UT 100% passed
-Cutting service provided
-Third Party inspection is acceptable (SGS, BV etc.)
EQUIVALENT GRADES
| Country | USA | DIN | Japan | China |
| Standard | ASTM A29 | EN 10083 | JIS G4801 | GB/T 3077 |
| Grades | 5160 | 1.7177/60Cr3 | SUP 9A | 60CrMnA |
CHEMICAL COMPOSITION
| Standard | Grade | C | Mn | P | S | Si | Cr |
| ASTM A29 | 5160 | 0.56-0.61 | 0.75-1.00 | 0.035 | 0.040 | 0.15-0.35 | 0.70-0.90 |
| EN 10083 | 1.7177 /60Cr3 | 0.55-0.65 | 0.70-1.00 | 0.025 | 0.025 | 0.40 | 0.60-0.90 |
| JIS G4801 | SUP 9A | 0.56-0.64 | 0.70-1.00 | 0.030 | 0.030 | 0.15-0.35 | 0.70-1.00 |
| GB/T 3077 | 60CrMnA | 0.56-0.64 | 0.70-1.00 | 0.025 | 0.025 | 0.17-0.37 | 0.70-1.00 |
MECHANICAL PROPERTIES
| Properties | Metric | Imperial |
| Tensile Strength ultimate | 724 Mpa | 105000 psi |
| Tensile Strength Yield | 275 Mpa | 39900 psi |
| Modulus of elasticity | 190-210 | 27557- 30458 ksi |
| Elongation at break (%) | 17.2 | 17.2 |
| Hardness (HB) | 197 | 197 |
| Poisson’s Ratio | 0.27-0.30 | 0.27-0.30 |
PROCESSING
Machinability
Machining 5160 alloy steel is difficult in “as rolled” condition. Hence, the steel should be annealed before machining to obtain maximum speeds.
Welding
AISI 5160 alloy steel has poor welding property owing to its high chromium and carbon content. Either arc or gas welding methods can be used to weld the steel.
Heat Treatment
AISI 5160 alloy steel is generally hardened using oil. This steel is quenched at 829°C (1525°F) and tempered at temperatures ranging from 427 and 704°C (800 and 1300°F).
Forging
Forging of 5160 alloy steel is performed at temperatures between 1149 and 1204°C (2100 and 2200°F).
Annealing
AISI 5160 alloy steel is annealed at 788°C (1450°F) and then air cooled.
What we can offer?
-We offer a wide range of steel products in a wide variety of dimensions and executions, according to the common international specifications or customize.
-Machining and heat treatment are available.
-Also, we advise you in choosing the right materials.
Shape Available
Our Advantages
OUR MAIN PRODUCTS ARE LISTED AS BELOW
Notes:
Available Size:
-Round: Dia. 4 -1600 mm
-Flat: T. 10-120 mm x W. 60-810 mm
-Block: T. 80-1200 mm x W. 100-1600 mm
PAYMENT AND SHIPPING
1. Both T/T and L/C will be acceptable
2. Trade Terms: FOB, CIF, CFR
3. The delivery will be in 10-15 days if have stock; For customized items, the delivery will be negotiated by both parties
4. Shipping by sea freight from Shanghai Port (PRC) for Bulk orders, by airfreight or express for samples
COMPANY INFORMATION
Shanghai Unite Steel Trading Co., Ltd
We are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national famous steel enterprise.
In the aspect of resources and information, we have established cooperative and stronger relationship with nearly hundred enterprises, either state-owned or private owned in china.
What’s more, we have built long, deep and close business relationship with dozens of steel company, Sharing and holding equities with several steel enterprises. Because of the close cooperation with steel companies and our pioneering spirit, which can ensure us stay at the top competition, and ensure our customers get what they really want!
FAQ
Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and
trading company. We specialized in special steel which include
alloy structural steel and carbon steel and stainless steel, etc.
All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party,
such as TUV, CE, if you need. Secondly, we have a complete set of
inspection system and every process is checked by QC. Quality is
the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our
warehouse. If the material doesn't have stock, the delivery lead
time is about 5-30 days after receiving your prepayment or firm
order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you
come to China and arrange our driver to our airport to pick you up
when you come.
CONTACT US
We are happy to answer your questions and make you an offer for these and other materials. Contact us now for more information.
Your Contact Person
Ms Chilli Ho
Phone/Wechat/Whatsapp +86-181-0187-5575
Skype: chilli.ho@outlook.com
Email: chilli.ho@shunitesteel.com
