Active Member
|
[China]
Address: Room 1109, Loft Office, Green Land International Plaza, No. 275-8 Guoding East Road, Shanghai 200433, P.R. China. (admin(a)shunitesteel.com)
Contact name:Eric
SHANGHAI UNITE STEEL |
|
|
AISI 8260 Hot Rolled Steel Bar,Alloy Steel Round Bar With Heat Treatment, Size 10-350mm
Quality: AISI8620 Standard Performed: ASTM A29/A29M-04
Grade:SAE8620 50CrMo4 SNCM220 805M20 4150 4140 EN24 4340
1.Description:
8620 is a low nickel - chromium - molybdenum medium hardenability,
case hardening (carburizing) steel, generally supplied in the as
rolled condition with a maximum brinell hardness of 280 (Rc30).
Characterised by good core strength and toughness in small to
medium sections with case hardness up to Rc62 when carburized,
hardened and tempered.
Pre hardened and tempered (uncarburized) 8620 can be further
surface hardened by nitriding but will not respond satisfactorily
to flame or induction hardening due to its low carbon content.
8620 (carburized) is used extensively by all industry sectors for
light to medium stressed components and shafts requiring high
surface wear resistance with reasonable core strength and impact
properties.
2.Application: Components for the automotive and general engineering industries eg. Propeller shafts, connecting rods, gear shafts, and other automobile parts. Heavy forgings, eg. Rotors, shafts, discs.
3.Process flow: Electric arc furnace melting→Refining furnace → Vacuum treatment furnace → Rolled →Anneal,retarded cooling,air cooling → Quenching and tempering tretment → Finishing operation → Text → Finished products.
4.Chemical composition:
| Grade | C | Si | Mn | P | S | Cr | Ni | Mo |
| 8620 | 0.18-0.23 | 0.15-0.35 | 0.70-0.90 | Max 0.035 | Max 0.035 | 0.40-0.60 | 0.40-0.70 | 0.15-0.25 |
5.Mechanical Property:
Grade:ASTM A29 SAE 8620 SNCM220
Hardness:197HB
Tensile strength:≥980(100)MPA
Yield strength: ≥785(180)MPA
elogation:≥9%
Hardness:( HBS 100/3000)<=197
Reduction of area:>=40
Akv(J)>=47 akv(J/cm2):>=59(6)
6.Certificate of Quality: issued in English, in addition the normal terms, production process, the mechanical property (yield strength, tensile strength, elongation and hardness), forged ratio, UT test result, Grain size, heat treatment methods and the sample of is shown on the Certificate of Quality.
Note:
1. According to national standard (GB)for our products, if not, supply according to national standards(GB) or agreement.
2. We can not only provide electric furnace +LF+VD and electroslag re-melting(ESR)steel forging materials, but also forging products of piece, bar, etc.
3. Our company is equipped with roll equipment and can provide our customers with roll billets or finished.
4. Please send us your detailed specifications when inquire.We will reply to you ASAP.
