Active Member
|
[China]
Address: Jindu Industrial Park, Huanggang Village, Houjie Town, Dongguan City, Guangdong Province.
Contact name:Marco Lee
Dongguan Jiazheng Hydraulic Technology Co, LTD |
|
|
Double Clamping Arm Air Rotary Clamp Casting Engine Cylinder Cover Processing Clamping Fixture
Product Features
1.The product is ideal for mass production on a special purpose
machine and jig on machining
center. It will greatly upgrade production efficiency.
2.When the air cylinder actuate, and the piston moves downward, the
clamping arm will swing to
a rated angle! Then it lowers until the workpiece is clamped
securely.
3.To avoid too fast motion a flow control valve is suggested to
connect to the air inlet ports (A, B)
on the swing clamp cylinder. Do not clamp workpiece while the clamp
is swinging to avoid
damaging on the cylinder barrel and internal parts.
4.When increasing length of clamping arm is required, be sure do
not exceed 1.5 times of the
ariginal length.
5.The cylinder body is manufactured from aluminum alloy. Surface is
hard membrane treated for
maximum smoothness on inside surface and long service life.
Specifications
| Bore of Cylinder (mm) | Φ25 | Φ32 | Φ40 | Φ50 | Φ63 |
| Diameter of Pison | Φ14 | Φ16 | Φ20 | Φ20 | Φ20 |
| Press Area pull/push | 3.37/4.91 | 6.03/8.04 | 10.56/12.57 | 16.49/19.63 | 28.03/31.17 |
| Theoretical Clamping Force 5kg/cm² | 16 | 30 | 50 | 85 | 140 |
| Swing Stroke (mm) | 9 | 11 | 13 | ||
| Clamping Stroke (mm) std/ extention | 13 | 15/30 | 17/43 | ||
| Fluid | Filtered Air | ||||
| Max Pressure (kg/cm²) | 10kg/cm² | ||||
| Normal Operation Pressure | 1--7kg/cm² | ||||
| Rotating Direction | Turn Right or Turn Left | ||||
| Rotating Angle | Standard angle 90°,Optinal angle 0°, 45°,60° | ||||
| Acting Type | Double Acting | ||||
Ordering Code
ASC--MF 25 S R * 90 – E
① ② ③ ④ ⑤ ⑥ ⑦
| ① | Series Code | Air Swing Clamp Cylinder |
| ② | Type | Blank: Line Type MF: Manifold with flow control MS:Magnetic type FA: Flange type TB:Thread body |
| ③ | Bore of Cylinder | 25=Φ25mm;32=Φ32mm;40=Φ40mm;50=Φ50mm; 63=Φ63mm |
| ④ | Clamping Arm Type | S:Single side arm D:Double side arm |
| ⑤ | Rotating Direction | R:Turn right L:Turn left N: 0°No swing
|
| ⑥ | Rotating Angle | 90=90°; 45=45°;60=60° |
| ⑦ | Stroke Extention Line Type |
