CNC Interface Board For Stepper Motor Controllers With Dual Control Interface

CNC Interface Board For Stepper Motor Controllers With Dual Control Interface

Used for the stepper motor kits

Thank you for choosing our products better and faster operational numerical control for you, please read this manual

>Products Features

   1.Dual Control Interface (25P Parallel programming with digital display manual control interface)
   2.Group 4 relay output control, you can drive motor, cylinder valves, pumps, etc.
   3.12 sets of control output signal, can control the stepper motor drives, automation signal, display, etc.
   4.A group of manual regulator output (PWM modulation), can control the speed spindle, speed motor, signal instructions, etc.
   5.A group of PC regulator output (PWM modulation), can control the speed spindle, speed motor, signal instructions, etc.
   6.Lose 5 set of input numbers, emergency stop, XYZ-axis limit input signal
   7.Input and output full LED display,
   8.Opto-coupled inputs and outputs completely closed, the full protection of control equipment and external implementation of the device

 

>Use
 

Power Use 12-24V/DC, output control is the OC-type (open-collector / negative triggering effective) Is negative trigger input mode effectively.

 

>The Interface Definition Interface Board

A group of output drive control interface definition

 

B-output signal control interface definition

C group input control interface definition

From the computer programmer control over the use of digital