Active Member
|
[China]
Address: no.8jinniu road, west industry zoon,Huangyan, Taizhou, Zhejiang,China
Contact name:Fional
Zhejiang Huangyan Hengxin Mould & Plastic Co.,LTD |
|
|
HENGXIN supplier PET preform mould, preform mould, PET mould, PET preform mold, preform mold, PET mold. cap mould, water cap mould, drinking bottle cap mould, flip top cap mould, bottle mould, blowing mould.
PET mould with hot runner
1.Material:2316 Steel,P20
2.Cavity:Single/Multi
3.Runner:Hot/Cold
4.Type:Air seal/short tail/long tail
5.One million Grantue
1.the mould is desigened with 3D modeling software
2.the mould is made by imported P20 and German 2306 seteel etc.
3.the mould is designed by advanced hot Runner system and each cavity has independent temperature control and heater system.
4.the mould surface is plated by reliable hard chrome.
5.the mould cavity is replaceable,so that the label top can be changed.
6.all the parts are manufactured with CNC equipments.
Preform PET Mould Main Components Specification and Advantages | ||
Main component | Specification and Advantages | |
Core | 2316 steel from Sweden | high-quality special mould steel from sweden (HRC >45) gurantee 2 million shots without any maintenance
|
Neck | S136 steel from Sweden, HRC >60, International standard screw neck | |
Cavity | 2316 steel from Sweden Each cavity have an independent temperature controller Each cavity self-clamp independently, ensure mould concentricity. 0.05-0.06mm | |
Body | P20 Steel material from Germany | |
Hotrunner plate | 2344 Steel material from Germany | |
Slider Plate | wear-resistant copper | |
specially designed cooling circuits | Proper design reduce molding cycle time to 15 seconds( with proper water chiller and injection machine) about 3-5 shots per minute | |
Hot runner design | make sure the high quality of preform products. | |
Heater | Anole Germany | |
valve gated design with Automatic drop | each cavity has its independent heating zone and temperature is measured by independent thermocouple. .(advantages: easily avoid some problems such as white or drawbench on bottom). Valve gated type without tail reduces labor force. | |
Precessed by high presion CNC machine and numerical control loathe machine | Lowest weight and dimensional variation thickness between max. part and min. part is not more than 0.05mm make sure that every parts can match well | |
