Huishuo Micro Stamping Parts Custom Deep Drawing Stamping Part

Micro Stamping Custom Deep Drawing Stamping Supplier

Deep Drawing Stamping Factory introduction:

Huishuo Co., Ltd. is located in Dongguan City, China, and has been committed to the design and manufacture of precision metal stamping dies and injection molds since 2009, including metal stamping and injection molding. In terms of progressive stamping dies, our products mainly involve precision terminals, connectors, contacts, clips, shrapnel, shells, shielding covers, etc. In metal stamping, there are many precision presses with tonnage ranging from 25T-160T, all of which are gantry high-speed machines. It can produce various coils and strips with a degree of 0.05-4.0mm. The stamping materials include cold-rolled steel, stainless steel, phosphor bronze, brass, red copper, beryllium copper, lead frame materials, etc. Regarding plastic injection molding production, we have many injection molding machines of various types between 50-160T, focusing on the production and processing of various plastic products.

Deep Drawing Stamping Parts Parameter:

Stamping index:

1. In stamping forming, sheet metal defects should be avoided. The formability limit that can be achieved without causing defects is called press formability. Stamp formability is related to the grain orientation, average plastic strain ratio, grain size and work hardening index of the material.
2. Stamp formability can be characterized by tensile plasticity, cupping and cold bending properties. Before the medium pressure, in addition to providing the yield strength, tensile strength, elongation and other parameters of the sheet, tests should also be carried out to obtain data such as cupping properties, work hardening, thickness and plane anisotropy, and rebound coefficient. To pull high-quality products, the appropriate sheet grade and condition should be selected, the mold should be carefully designed, the details between processes should be considered, and the necessary lubrication and intermediate annealing should be carried out.