Active Member
|
[China]
Address: B-1906,Zhantao-Tech mansion ,Minzhi road 1079,longhua Dis,shenzhen 518110 China
Contact name:Leo yang
Uonel Co.Limtied |
|
|
ZXCTN 6130XG-S is a next generation
carrier-class multiservice transport platform. It mainly locates at
access layer. Facing the complicated and uncertain service network
bearing demands, it integrates the advantages of packet and
transmission technologies. Adopting the system architecture with
packet switching as kernel, it integrates various IP/MPLS services
and standardized services. Integrating adaptive interfaces,
synchronous clock and carrier-class OAM and protection for
multi-service, it implements Ethernet carrier-class service
processing and transmission.
Integrated bearing platform satisfies development demands
Based on full-packet architecture, ZXCTN 6130XG-S adopts PWE3 emulation. It supports highly efficient MPLS tunnel technologies , L2 & L3 VPN, completely meets all-service development demands and reduces network TCO.
Leading clock technology satisfies highly precise synchronization demand
ZTE was the first vendor to propose the IEEE 1588v2+G.8261 synchronization solution which has been submitted by ITU-T. The solution takes the technical advantages of IEEE1588v2 and G.8261, and provides four features: high-precision synchronization, faster convergence, lower bandwidth requirement and service load independence. By replacing GPS, It saves on the cost of GPS construction and maintenance.
Complete end-to-end QoS solution provides refined differentiated services
ZXCTN 6130XG-S provides end-to-end QoS management which can fully meet different requirements of different services on delay, jitter, and bandwidth. It supports Diff-Serv based QoS scheduling. It implements traffic classification and marking based on port, VLAN, 802.1p, DSCP/TOS, MAC, and IP address. It supports service traffic monitoring, queue scheduling, congestion control and traffic shaping. Implementing bandwidth control of user-level multi-service, it truly realizes service access SLA and provides guarantee for carriers’ refined operation.
Powerful hierarchical OAM improves network availability
ZXCTN 6130XG-S completely supports MPLS and Ethernet OAM. Based on hardware hierarchical monitoring, it implements fast fault detection and location, performance monitoring, and end-to-end service management. It supports continuous OAM and OAM-on-demand to guarantee carrier-class service quality of service in packet transmission network. Based on various granularities such as physical port, logic link, tunnel, and pseudo-wire, hierarchical OAM makes more transparent network operation & maintenance and easier operation management.
Multiple reliability mechanisms guarantee network security
ZXCTN 6130XG-S supports a variety of protection technologies such an MPLS-TE FRR, PW redundancy. It provides multiple choices for complicated full-service application scenarios to guarantee 50ms fast switching. Network edge-level protection supports multiple protections of LAG with the reliability of carrier-class 99.999%.
ZXCTN 6130XG-S is equipped with rich security features and anti-attack features. It supports wire-speed forwarding, packet detection and traffic differentiation capacity with ACL configuration. It supports CPU protection and protocol packet rate limit, routing authentication, DDoS attack detection, and hierarchical network management to completely prevent risks of network attack.
Unified network management system simplifies operation and maintenance
ZXCTN 6130XG-S adopts ZTE unified network management platform NetNumen, together with SDH/MSTP, ASON, WDM, OTN, Switch and Router to implement integrated management. It supports static and dynamic configuration of service connection to implement end-to-end path creation and management. It provides powerful QoS, OAM management, real-time alarm and performance monitoring. Being easy to operate and maintain, its network element management and friendly interface conforms to the requirement of traditional transmission network, making the packet network the manageable and easy to maintain.
Green product, green operation and maintenance
ZXCTN 6130XG-S is small size, light weight, and large capacity, ZXCTN 6130XG-S can efficiently help customers to save energy and allow simpler deployment environment.
Customer Benefits
Enhanced Service Level Agreements (SLA)
The ZXCTN 6130XG-S opens up new revenue streams by offering meaningful SLAs. These SLAs extend QoS contracts available for advanced broadband data services such as Ethernet and IP. Mission-critical services can now exist on technologies previously limited to traditional best-effort performance.
Superior Traffic Management
The ZXCTN 6130XG-S ensures that policies defining SLAs for each service contract are honored. The state-of-the-art QoS processing technology provides deterministic and granular per-flow and per-service SLA bandwidth management. Service-aware queuing techniques and traffic shaping help ensure predictability through varying levels of network utilization.
Guaranteed Service Availability
The perfect reliability mechanisms and redundant hardware assures no single point of failure, non-service affecting product upgrades, in-service network expansion and carrier-class protection and switching to maximize fault tolerance and performance.
Capex Reduction
Service providers frequently maintain multiple core service networks based on the individual end-customer services being offered. The ZXCTN 6130XG-S provides a consolidated network infrastructure, collapsing multiple overlay networks to reduce the total number of network elements. Capital expenditures are further reduced with industry-leading technology, density and performance improvement.
Opex Reduction
The ZXCTN 6130XG-S reduces truck rolls, lowers spares inventory and minimizes operational costs for service providers.
In addition, the Graphic network management and E2E service configuration further reduces operational complexity of managing multiple networks or network layers in the service provider network. Reduced operations costs are facilitated to bring greater profits and revenues.
Applications and Services
The ZXCTN 6130XG-S enables service providers to offer the following services on converged network architecture, benefiting from new revenue opportunities while maintaining their legacy investments:
Layer 1/Layer 2 Legacy Services
Ethernet service defined in MEF, such as E-LINE
MPLS Layer 2 VPNs
VPWS & VPLS for point-to-point Ethernet/VLAN (Layer 2 VPN)
MPLS Layer 3 VPNs
High-performance Layer 3 VPNs
Wireless Transport
Return Material Authorization (RMA) Process
Standard Hardware Warranty Policy:
Original new sealed ZTE product: 1 Year
The Support Contacts:
If your ZTE products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.
Uonel is one of the biggest Network Hardware distributor in china, founded in 2008. We are a global provider of netwotking products with more than 5000 customers.
We provide original new Huawei & ZTE & Cisco & Fiberhome & H3C & Ericsson & Alcatel Lucent & Emerson with Routers,Switches,Firewalls,Wireless APs & controllers,OLTs,GPON modems,optical transceivers.we can provide Plenty of Stock, Fast Delivery, Better price, and original guarantee.
Most of our technical engineers has considerable experience in company,we can provide network design&planning,configration,troubleshooting,maintenance and training service in world wide.
