Home Companies Uonel Co.Limtied

OptiX OSN 8800 TN12ND2B 2 x 10G line service processing board-- OSN8800

Active Member

Contact Us

[China]

Address: B-1906,Zhantao-Tech mansion ,Minzhi road 1079,longhua Dis,shenzhen 518110 China

Contact name:Leo yang

Uonel Co.Limtied

OptiX OSN 8800 TN12ND2B 2 x 10G line service processing board-- OSN8800

Country/Region	china
City & Province	shenzhen

Product Details

Version Description

The available functional versions of the ND2 board are TN11, TN12, TN52, and TN53.

Mappings Between the Board and Equipment

The following provides the board(s) supported by the product. However, the availability of the board(s) is subject to PCNs. For PCN information, contact the product manager at your local office.

Board	Initial Version^a	General 8800 T64 Subrack	Enhanced 8800 T64 Subrack	General 8800 T32 Subrack	Enhanced 8800 T32 Subrack	8800 T16 Subrack	8800 Universal Platform Subrack	6800 Subrack	3800 Chassis
TN11ND2	V100R004	N	N	N	N	N	N	Y	N
TN12ND2	8800:V100R007C00 6800:V100R004C03	N	N	N	N	N	Y	Y	N
TN52ND2	V100R002C00	Y	Y	Y	Y	Y	Y	Y	N
TN53ND2	V100R006C01	Y	Y	Y	Y	Y	Y	Y	N
a: If there is a substitution relationship between two boards and one of the boards is used to replace the other board, the device initial version supported by the replaced board takes effect. For example, when you use TN53ND2 to replace TN52ND2 in 8800, TN53ND2 can be supported by V100R002C00.

NOTE:

The TN12ND2/TN52ND2/TN53ND2 board for the OptiX OSN 8800 universal platform subrack only supports relay mode.

Variants

The difference between the ND2 board variants lies in the WDM-side optical module.

Table 1 Available variants of the TN11ND2 board

Variant	WDM-Side Fixed Optical Module
01M01	800 ps/nm-C Band (Odd & Even Wavelength)-Fixed Wavelength-NRZ-PIN
T01	800 ps/nm-C Band-Tunable Wavelength-NRZ-PIN
T02	800 ps/nm-C Band-Tunable Wavelength-(D)RZ-PIN

Table 2 Available variants of the TN12ND2 board

Variant	WDM-Side Optical Module
T01	800 ps/nm-C Band-Tunable Wavelength-NRZ-PIN
T02	800 ps/nm-C Band-Tunable Wavelength-(D)RZ-PIN
B	The WDM-side optical modules are pluggable. For details, see ND2 Specifications.

Table 3 Available variants of the TN52ND2 board

Variant	WDM-Side Fixed Optical Module	ODUflex	Direct Mapping of ODU0 to ODU2	IEEE 1588v2	Physical-Layer Clock
T01	800 ps/nm-C Band-Tunable Wavelength-(D)RZ-PIN	N	N	Y	Y
T02	800 ps/nm-C Band-Tunable Wavelength-NRZ-PIN	N	N	Y	Y
T04	800 ps/nm-C Band-Tunable Wavelength-(D)RZ-PIN	Y	Y	N	N

Table 4 Available variants of the TN53ND2 board

Variant	Description
01	The WDM-side optical modules are pluggable. For details, see ND2 Specifications.

Functions and Features

The ND2 board is mainly used to achieve cross-connection at the electrical layer, and to provide OTN interfaces and ESC.

For detailed functions and features, refer to Table 1 and Table 2.

NOTE:

Only the OptiX OSN 8800 supports ODU0/ODUflex.

Table 1 Functions and features of the ND2 board (Line Mode)

Function and feature	Description
Basic function	The ND2 board converts signals as follows: TN11ND2/TN12ND2: 8 x ODU1/2 x ODU2<->2 x OTU2 2 x ODU2e<->2 x OTU2e TN52ND2T01/TN52ND2T02: 16 x ODU0/8 x ODU1/2 x ODU2<->2 x OTU2 2 x ODU2e<->2 x OTU2e TN52ND2T04/TN53ND2: 16 x ODU0/8 x ODU1/2 x ODU2/4 x ODUflex<->2 x OTU2 2 x ODU2e<->2 x OTU2e Supports hybrid transmission of the ODU0 signals, ODU1 signals , ODUflex signals and the ODU2/ODU2e signals.
Cross-connect capabilities	Supports cross-connections with cross-connect boards. TN11ND2/TN12ND2: 8 x ODU1/2 x ODU2/2 x ODU2e TN52ND2T01/TN52ND2T02: 16 x ODU0/8 x ODU1/2 x ODU2/2 x ODU2e TN52ND2T04/TN53ND2: 16 x ODU0/8 x ODU1/4 x ODUflex/2 x ODU2/2 x ODU2e
OTN function	Supports the OTU2/OTU2e interface on the WDM side. Supports the OTN frame format and overhead processing by referring to the ITU-T G.709. OTU2 layer: supports the SM function. ODUk (k=0, 1, 2) layer: supports the PM and TCM function, and PM and TCM non-intrusive monitoring functions. ODUflex layer: supports the PM function and PM non-intrusive monitoring functions. NOTE: Only the TN52ND2T04/TN53ND2 supports TCM and TCM non-intrusive monitoring for ODU0.
WDM specification	Supports ITU-T G.694.1-compliant DWDM specifications.
Tunable wavelength function	Supports tunable wavelength optical modules that provide for: 40 wavelengths tunable in the C band with 100 GHz channel spacing 80 wavelengths tunable in the C band with 50 GHz channel spacing
ESC function	Supported
PRBS function	Supports the PRBS function on the WDM side. NOTE: If the TN52ND2T04/TN53ND2 board interconnects with another line board, PRBS must be enabled for the TN52ND2T04/TN53ND2 board and the connected line board. In addition, the PRBS function can take effect on the boards only when the following condition is met: The TN52ND2T04/TN53ND2 board works in standard mode and ODU0, ODU1, or ODUflex cross-connections are configured for the TN52ND2T04/TN53ND2 board, or the TN52ND2T04/TN53ND2 board works in compatible mode but no cross-connection is configured for it.
LPT function	Not supported
FEC coding	TN11ND2: Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side. Supports ITU-T G.975.1-compliant advanced forward error correction (AFEC) on the WDM side. TN12ND2/TN52ND2/TN53ND2: Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side. Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side. NOTE: Boards that use different FEC modes cannot interconnect with each other.
Alarm and performance event monitoring	Monitors BIP8 bytes (Bursty mode) to help locate line failures. Monitors parameters such as the bias current, temperature, and optical power of the laser. Monitors OTN alarms and performance events.
Regeneration board	The WDM-side signals from one TN11ND2 board can be regenerated by another TN11LSXR board. The WDM-side signals from one TN12ND2/TN52ND2/TN53ND2 board can be regenerated by another TN12ND2/TN52ND2/TN53ND2/TN55NO2/TN53NQ2/TN54NQ2 board.
ALS function	Not supported
Test frame	Not supported
IEEE 1588v2	The TN12ND2/TN52ND2T01/TN52ND2T02/TN53ND2 board supports the BC and OC modes; it does not support the TC or TC+OC mode.
Physical clock	The TN12ND2 board supports this feature only when ODU1 signals are cross-connected from the backplane. The TN52ND2T01/TN52ND2T02 board supports this feature only when ODU0 or ODU1 signals are cross-connected from the backplane. The TN53ND2 board supports this feature only when ODU0, ODU1, ODUflex signals are cross-connected from the backplane.
Optical-layer ASON	Supported
Electrical-layer ASON	Supported by the TN11ND2/TN12ND2/TN52ND2/TN53ND2
Protection scheme	Supports ODUk SNCP. Supports intra-board 1+1 protection (when working with the OLP/DCP/QCP board). Supports OWSP protection. Supports ODUk SPRing protection. Supports tributary SNCP protection. NOTE: When the cross-connect granularity is ODUflex, the board does not support tributary SNCP protection and ODUk SPRing protection.
Loopback	Board	WDM Side	ODU0 Channel Loopback	ODU1 Channel Loopback	ODUflex Channel Loopback
	TN11ND2	Supported	Not supported	Supported	Not supported
	TN12ND2	Supported	Not supported	Supported	Not supported
	TN52ND2T01 TN52ND2T02	Supported	Supported	Supported	Not supported
	TN52ND2T04 TN53ND2	Supported only when ODU2/ODU2e signals are received from the backplane.	Supported	Supported only when ODU1 signals are received from the backplane.	Supported
Protocols or standards compliance	Protocols or standards for transparent transmission (non-performance monitoring)	IEEE 802.3u IEEE 802.3z IEEE 802.3ae ITU-T G.707 ITU-T G.782 ITU-T G.783 GR-253-CORE Synchronous Optical Network (SONET) Transport Systems: Common Generic NCITS FIBRE CHANNEL PHYSICAL INTERFACES (FC-PI) NCITS FIBRE CHANNEL LINK SERVICES (FC-LS) NCITS FIBRE CHANNEL FRAMING AND SIGNALING-2 (FC-FS-2) NCITS FIBRE CHANNEL BACKBONE-3 (FC-BB-3) NCITS FIBRE CHANNEL SWITCH FABRIC-3 (FC-SW-3) NCITS FIBRE CHANNEL - PHYSICAL AND SIGNALING INTERFACE (FC-PH) NCITS FIBRE CHANNEL SINGLE-BYTE COMMAND CODE SETS-2 MAPPING PROTOCOL (FC-SB-2) SMPTE 292M Bit-Serial Digital Interface for High-Definition Television Systems ETSI TR 101 891 Professional Interfaces: Guidelines for the implementation and usage of the DVB Asynchronous Serial Interface (ASI) SMPTE 259M 10-Bit 4:2:2 Component and 4fsc Composite Digital Signals - Serial Digital Interface NCITS SBCON Single-Byte Command Code Sets CONnection architecture (SBCON) ANSI X3.139 Information Systems - Fiber Distributed Data Interface (FDDI) - Token Ring Media Access Control (MAC) ANSI X3.148 Information Systems - Fiber Distributed Data Interface (FDDI) - Token Ring Physical Layer Protocol (PHY) ANSI X3.166 Information Systems - Fiber Distributed Data Interface (FDDI) Physical Layer Medium Dependent (PDM)
Protocols or standards compliance	Protocols or standards for service processing (performance monitoring)	ITU-T G.805 ITU-T G.806 ITU-T G.709 ITU-T G.872 ITU-T G.7710 ITU-T G.798 ITU-T G.874 ITU-T M.3100 ITU-T G.874.1 ITU-T G.875 ITU-T G.808.1 ITU-T G.841 ITU-T G.8201 ITU-T G.873.1 ITU-T G.694.1

NOTE:

The relay mode is supported only by the TN12ND2/TN52ND2/TN53ND2.

Table 2 Functions and features of the ND2 board (Relay Mode)

Function and feature	Description
Basic function	The board is used in an electrical REG station in the system to implement electrical regeneration of optical signals.
Regenerating rate	OTU2: OTN service at a rate of 10.71 Gbit/s OTU2e: OTN service at a rate of 11.1 Gbit/s or 11.3Gbit/s NOTE: Only the TN12ND2/TN52ND2 board equipped with "800 ps/nm-C Band-Tunable Wavelength-(D)RZ-PIN" optical module supports regeneration of 11.3 Gbit/s OTU2e.
OTN function	Provides the OTU2/OTU2e interface on the WDM side. Supports the OTN frame format and overhead processing by referring to the ITU-T G.709. OTU2 layer: supports the SM function. ODU2 layer: supports the PM and TCM function, and PM and TCM non-intrusive monitoring functions.
WDM specification	Supports ITU-T G.694.1-compliant DWDM specifications.
Tunable wavelength function	Supports tunable wavelength optical modules that provide for: 40 wavelengths tunable in the C band with 100 GHz channel spacing 80 wavelengths tunable in the C band with 50 GHz channel spacing
ESC function	Supported
PRBS test function	Not supported
FEC coding	TN12ND2/TN52ND2/TN53ND2: Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side. Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side. NOTE: Boards that use different FEC modes cannot interconnect with each other.
Alarm and performance event monitoring	Monitors BIP8 bytes (Bursty mode) to help locate line failures. Monitors parameters such as the bias current, temperature, and optical power of the laser. Monitors OTN alarms and performance events.
ALS function	Not supported
Test frame	Not supported
IEEE 1588v2	Not supported
Physical clock	Not supported
Optical-layer ASON	Supported
Electrical-layer ASON	Not supported
Protection scheme	Not supported
Loopback	Not supported
Protocols or standards compliance	Protocols or standards for transparent transmission (non-performance monitoring)	-
Protocols or standards compliance	Protocols or standards for service processing (performance monitoring)	ITU-T G.805 ITU-T G.806 ITU-T G.709 ITU-T G.872 ITU-T G.7710 ITU-T G.798 ITU-T G.874 ITU-T M.3100 ITU-T G.874.1 ITU-T G.875 ITU-T G.808.1 ITU-T G.841 ITU-T G.8201 ITU-T G.694.1

Delivery

Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.

Delivery Options	Estimated Delivery Time
DHL	3-5 business days
Fedex	3-5 business days
By Sea	10-20 business days

Notice:

Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:

Deliver to port:

Uonel is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Uonel will recommend trustworthy local freight forwarders to you.Uonel can facilitate the progress under buyer's permission and at buyer's expense.

Deliver to door:

Uonel will quote all destination charge prior once we have confirmed order.
Uonel is responsible for transporting goods to door after you have made the payment.

Warranty

100% Low Price Guarantee:
Uonel provides high-quality products at low wholesale prices

100% Quality Assurance:
All items are ORIGINAL NEW and GENUINE only.

Free Technical Support:

Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.

100% Money Back Guarantee:
You can contact our customer service team to exchange or return any product that you bought from us.

Flexible Secure Payment & Shipment:
Verified authorization: Mcafee Secure, VeriSign Secured

Return Material Authorization (RMA) Process

Standard Hardware Warranty Policy:

Original new sealed product: 1 Year

The Support Contacts:

If your products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.

Company Profile

Uonel is one of the biggest Network Hardware distributor in china, founded in 2008. We are a global provider of netwotking products with more than 5000 customers.

We provide original new Routers,Switches,Firewalls,Wireless APs & controllers,OLTs,GPON modems,optical transceivers.Our company have more than $5million products in stock.

Most of our technical engineers had work exprience in company,we can provide network design&planning,configration,troubleshooting,maintenance and training service in world wide.