Uonel Co.Limtied |
|
The NS3 board achieves cross-connection at the electrical layer, and to provide OTN interfaces and ESC. The TN56NS3 board supports hybrid transmission of OTN and SDH services.
Only the OptiX OSN 8800 supports ODU0/ODU3.
The relay mode is only supported by the TN54NS3/TN55NS3/TN56NS3.
Function and feature | Description | ||||
---|---|---|---|---|---|
Basic function | NS3 converts signals as follows:
The TN52NS3/TN54NS3/TN55NS3 board supports hybrid transmission of ODU0/ODU1/ODU2/ODU2e signals. The TN56NS3 board supports hybrid transmission of ODU0/ODU1/ODU2/ODU2e/ODUflex/VC-4 signals. When the mixed signals contain an ODU2e signal, they must be mapped into an OTU3e signal. The TN11NS3/TN52NS3/TN54NS3 board supports dispersion compensation for signals received on the WDM side. | ||||
Cross-connect capabilities | Supports cross-connections with cross-connect boards. OptiX OSN 8800:
OptiX OSN 6800:
| ||||
OTN function |
NOTE: Only the TN56NS3 board supports TCM and TCM non-intrusive
monitoring of the ODU0 and ODUflex layer. | ||||
SDH service processing | Supports the VC-12 services, VC-3 services, VC-4 services, VC-4-4c concatenation services, VC-4-16c concatenation services, and VC-4-64c concatenation services. | ||||
SDH overhead processing | Only the TN56NS3 board supports the following functions:
NOTE: The TN56NS3 board supports D4–D12 overhead processing. It does not
support D1–D3 overhead processing. | ||||
WDM specification | Supports ITU-T G.694.1-compliant DWDM specifications. | ||||
Tunable wavelength function | Supports tunable wavelength optical modules that provide for:
| ||||
ESC function | Supported | ||||
PRBS test function | TN52NS3/TN54NS3/TN55NS3/TN56NS3 supports the PRBS function on the WDM side. | ||||
LPT function | Not supported | ||||
FEC coding | TN11NS3/TN52NS3:
TN54NS3:
TN55NS3/TN56NS3:
NOTE: Boards that use different FEC modes cannot interconnect with each
other. | ||||
Alarms and performance events monitoring |
NOTE: Only the TN54NS3 supports Poisson mode. Only the TN55NS3/TN56NS3 board supports CD and PMD performance monitoring. Only the TN56NS3 board supports B1/B2 byte monitoring. | ||||
Regeneration board |
| ||||
ALS function | Not supported | ||||
Test frame | Not supported | ||||
IEEE 1588v2 | The TN54NS3 board supports BC and OC mode, do not support TC and TC+OC mode. | ||||
Physical clock (OTN) | The TN54NS3 board supports this feature only when ODU0, ODU1 or
ODU2/ODU2e signals are cross-connected from the backplane. The TN56NS3 board supports this feature only when ODU0, ODU1, ODU2/ODU2e or ODUflex signals are cross-connected from the backplane. | ||||
Physical clock (OCS) | Supported only by the TN56NS3 board. | ||||
Optical-layer ASON | Supported | ||||
Electrical-layer ASON (OTN) | Supported by the TN52NS3, TN54NS3, TN55NS3, and TN56NS3. | ||||
Electrical-layer ASON (SDH) | Supported only by the TN56NS3 board. NOTE: When being installed in a T16 subrack, the board does not support
SDH ASON. | ||||
Protection scheme | OTN protection
SDH protection
NOTE: Only TN52NS3 supports OWSP protection. When the grooming granularity is ODUflex, ODUk SPRing and tributary SNCP protection types are not supported. | ||||
Loopback | Board | WDM side | ODU0/ODU1/ODU2 Channel Loopback | ODUflex Channel Loopback | VC-4 Channel Loopback |
TN11NS3 | Supported | ODU0/ODU1: NA ODU2: Supported | N/A | N/A | |
TN52NS3 | Supported | Supported | N/A | N/A | |
TN54NS3 | Supported | Supported | N/A | N/A | |
TN55NS3 | Supported | Supported | N/A | N/A | |
TN56NS3 | Supported | Supported | Supported | Supported | |
Protocols or standards compliance | Protocols or standards for transparent transmission (non-performance monitoring) | IEEE 802.3u IEEE 802.3z IEEE 802.3ae IEEE 802.3ba ITU-T G.707 ITU-T G.782 ITU-T G.783 ITU-T G.774.7 GR-253-CORE Synchronous Optical Network (SONET) Transport Systems: Common Generic NCITS FIBRE CHANNEL PHYSICAL INTERFACES (FC-PI) NCITS FIBRE CHANNEL LINK SERVICES (FC-LS) NCITS FIBRE CHANNEL FRAMING AND SIGNALING-2 (FC-FS-2) NCITS FIBRE CHANNEL BACKBONE-3 (FC-BB-3) NCITS FIBRE CHANNEL SWITCH FABRIC-3 (FC-SW-3) NCITS FIBRE CHANNEL - PHYSICAL AND SIGNALING INTERFACE (FC-PH) NCITS FIBRE CHANNEL SINGLE-BYTE COMMAND CODE SETS-2 MAPPING PROTOCOL (FC-SB-2) SMPTE 292M Bit-Serial Digital Interface for High-Definition Television Systems ETSI TR 101 891 Professional Interfaces: Guidelines for the implementation and usage of the DVB Asynchronous Serial Interface (ASI) SMPTE 259M 10-Bit 4:2:2 Component and 4fsc Composite Digital Signals - Serial Digital Interface SMPTE 297-2006 Serial Digital Fiber Transmission System for SMPTE 259M, SMPTE 344M, SMPTE 292 and SMPTE 424M Signals NCITS SBCON Single-Byte Command Code Sets CONnection architecture (SBCON) ANSI X3.139 Information Systems - Fiber Distributed Data Interface (FDDI) - Token Ring Media Access Control (MAC) ANSI X3.148 Information Systems - Fiber Distributed Data Interface (FDDI) - Token Ring Physical Layer Protocol (PHY) ANSI X3.166 Information Systems - Fiber Distributed Data Interface (FDDI) Physical Layer Medium Dependent (PDM) | |||
Protocols or standards for service processing (performance monitoring) | ITU-T G.805 ITU-T G.806 ITU-T G.709 ITU-T G.872 ITU-T G.7710 ITU-T G.798 ITU-T G.874 ITU-T M.3100 ITU-T G.874.1 ITU-T G.875 ITU-T G.808.1 ITU-T G.841 ITU-T G.8201 ITU-T G.873.1 ITU-T G.694.1 ITU-T G.707 ITU-T G.783 ITU-T G.774.1 ITU-T G.774.2 ITU-T G.774.3 ITU-T G.774.4 ITU-T G.774.5 ITU-T G.774.6 ITU-T G.774.9 ITU-T G.774.10 ITU-T G.825 ITU-T G.829 |
Function and feature | Description | ||
---|---|---|---|
Basic function | The board is used in an electrical REG station in the system to implement electrical regeneration of optical signals. | ||
Regenerating rate | OTU3: OTN service at a rate of 43.02 Gbit/s OTU3e: OTN service at a rate of 44.58 Gbit/s | ||
OTN function |
| ||
WDM specification | Supports ITU-T G.694.1-compliant DWDM specifications. | ||
Tunable wavelength function | Supports tunable wavelength optical modules that provide for:
| ||
ESC function | Supported | ||
PRBS test function | Not supported | ||
FEC coding | TN54NS3:
TN55NS3/TN56NS3:
NOTE: Boards that use different FEC modes cannot interconnect with each
other. | ||
Alarms and performance events monitoring |
NOTE: Only the TN54NS3 supports Poisson mode. | ||
ALS function | Not supported | ||
Test frame | Not supported | ||
IEEE 1588v2 | Not supported | ||
Physical clock | Not supported | ||
Optical-layer ASON | Supported | ||
Electrical-layer ASON | Not supported | ||
Protection scheme | Not supported | ||
Loopback | Not supported | ||
Protocols or standards compliance | Protocols or standards for transparent transmission (non-performance monitoring) | - | |
Protocols or standards for service processing (performance monitoring) | ITU-T G.805 ITU-T G.806 ITU-T G.709 ITU-T G.872 ITU-T G.7710 ITU-T G.798 ITU-T G.874 ITU-T M.3100 ITU-T G.874.1 ITU-T G.875 ITU-T G.808.1 ITU-T G.841 ITU-T G.8201 ITU-T G.694.1 |
Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.
Delivery Options | Estimated Delivery Time |
---|---|
DHL | 3-5 business days |
Fedex | 3-5 business days |
By Sea | 10-20 business days |
Notice:
Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:
Deliver to port:
Uonel is responsible for transporting goods to port. All
subsequent customs and transportation fees are the
responsibility of the buyer. Uonel will recommend trustworthy
local freight forwarders to you.Uonel can facilitate the progress
under buyer's permission and at buyer's expense.
Deliver to door:
Uonel will quote all destination charge prior once we have
confirmed order.
Uonel is responsible for transporting goods to door after you
have made the payment.
100% Low Price Guarantee:
Uonel provides
high-quality products at low wholesale prices
100% Quality Assurance:
All items are
ORIGINAL NEW and GENUINE only.
Free Technical Support:
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee:
You can contact our customer service team to exchange or return any
product that you bought from us.
Flexible Secure Payment & Shipment:
Verified
authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Hardware Warranty Policy:
Original new sealed product: 1 Year
The Support Contacts:
If your products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Uonel is one of the biggest Network Hardware distributor in china, founded in 2008. We are a global provider of netwotking products with more than 5000 customers.
We provide original new Routers,Switches,Firewalls,Wireless APs & controllers,OLTs,GPON modems,optical transceivers.Our company have more than $5million products in stock.
Most of our technical engineers had work exprience in company,we can provide network design&planning,configration,troubleshooting,maintenance and training service in world wide.