Uonel Co.Limtied |
|
The LQMS board is mainly used to achieve wavelength tunable and cross-connection at the electrical layer, and to provide OTN interfaces and ESC.
For detailed functions and features, refer to Table 1.
Function and Feature | Description | ||
---|---|---|---|
Basic function | LQMS converts signals as follows:
| ||
Client-side service type | FE: Ethernet service at a rate of 125 Mbit/s GE: Ethernet service at a rate of 1.25 Gbit/s OTU1: OTN service at a rate of 2.67 Gbit/s STM-1/OC-3: SDH/SONET service at a rate of 155.52 Mbit/s STM-4/OC-12: SDH/SONET service at a rate of 622.08 Mbit/s STM-16/OC-48: SDH/SONET service at a rate of 2.5 Gbit/s FC100: SAN service at a rate of 1.06 Gbit/s FC200: SAN service at a rate of 2.12 Gbit/s FICON: SAN service at a rate of 1.06 Gbit/s FICON Express: SAN service at a rate of 2.12 Gbit/s DVB-ASI: Video service at a rate of 270 Mbit/s ESCON: SAN service at a rate of 200 Mbit/s FDDI: SAN service at a rate of 125 Mbit/s NOTE: Only TN12LQMS supports OTU1 and FDDI services. | ||
Cross-connect capabilities | OptiX OSN 8800: N/A. OptiX OSN 6800:
OptiX OSN 3800
| ||
OTN function |
| ||
WDM specification | TN11LQMS:
TN12LQMS: Supports ITU-T G.694.1-compliant DWDM specifications. | ||
Tunable wavelength function | Supports the tunable wavelength optical module. Equipped with this module, the board can tune the optical signal output on the WDM side within the range of the 40 wavelengths in C-band with the channel spacing of 100 GHz. | ||
ESC function | Supported. | ||
PRBS test function | TN11LQMS: supports the PRBS function on the WDM side. TN12LQMS: supports the PRBS function on the client side and WDM
side. NOTE: The PRBS function on the client side is supported only when the
client-side service type is STM-1/OC–3, STM-4/OC-12, or
STM-16/OC-48. | ||
LPT function | The board supports the LPT function only when the client-side service type is FE or GE. | ||
FEC coding | Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side. | ||
Alarms and performance events monitoring |
NOTE: TN11LQMS only supports Poisson mode. | ||
ALS function | Supports the ALS function on the client side when client services are non-OTN services. | ||
Test frame | TN11LQMS: not supported TN12LQMS: the board supports the test frame function only when the client-side service type is FE or GE. | ||
Latency measurement | Not supported | ||
Optical-layer ASON | Not supported | ||
Electrical-layer ASON | Not supported | ||
Protection scheme |
NOTE: OptiX OSN 8800 supports client-side 1+1 protection and the OWSP
protection. | ||
Ethernet service mapping mode | Supports encapsulation of GE services in GE(GFP-F) (displayed as GE on the NMS) and GE(GFP-T) modes. | ||
Ethernet port working mode | FE: 100M Full-Duplex GE(GFP-F): 1000M Full-Duplex, Auto-Negotiation | ||
Port MTU | The value ranges from 1518 to 9600, in bytes. That is, the maximum size of the supported Jumbo frame is 9600 bytes. | ||
Loopback | WDM side | Inloop | Supported |
Outloop | Supported | ||
Client side | Inloop | Supported | |
Outloop | Supported | ||
Protocols or standards compliance | Protocols or standards for transparent transmission (non-performance monitoring) | IEEE 802.3u IEEE 802.3z ITU-T G.707 ITU-T G.782 ITU-T G.783 GR-253-CORE Synchronous Optical Network (SONET) Transport Systems: Common Generic NCITS FIBRE CHANNEL PHYSICAL INTERFACES (FC-PI) NCITS FIBRE CHANNEL LINK SERVICES (FC-LS) NCITS FIBRE CHANNEL FRAMING AND SIGNALING-2 (FC-FS-2) NCITS FIBRE CHANNEL BACKBONE-3 (FC-BB-3) NCITS FIBRE CHANNEL SWITCH FABRIC-3 (FC-SW-3) NCITS FIBRE CHANNEL - PHYSICAL AND SIGNALING INTERFACE (FC-PH) NCITS FIBRE CHANNEL SINGLE-BYTE COMMAND CODE SETS-2 MAPPING PROTOCOL (FC-SB-2) SMPTE 292M Bit-Serial Digital Interface for High-Definition Television Systems ETSI TR 101 891 Professional Interfaces: Guidelines for the implementation and usage of the DVB Asynchronous Serial Interface (ASI) SMPTE 259M 10-Bit 4:2:2 Component and 4fsc Composite Digital Signals - Serial Digital Interface NCITS SBCON Single-Byte Command Code Sets CONnection architecture (SBCON) ANSI X3.139 Information Systems - Fiber Distributed Data Interface (FDDI) - Token Ring Media Access Control (MAC) ANSI X3.148 Information Systems - Fiber Distributed Data Interface (FDDI) - Token Ring Physical Layer Protocol (PHY) ANSI X3.166 Information Systems - Fiber Distributed Data Interface (FDDI) Physical Layer Medium Dependent (PDM) | |
Protocols or standards for service processing (performance monitoring) | ITU-T G.805 ITU-T G.806 ITU-T G.709 ITU-T G.872 ITU-T G.7710 ITU-T G.798 ITU-T G.874 ITU-T M.3100 ITU-T G.874.1 ITU-T G.875 ITU-T G.808.1 ITU-T G.841 ITU-T G.873.1 ITU-T G.8201 ITU-T G.694.1 ITU-T G.694.2 |
Board | WDM-Side Optical Module | Typical Power Consumption (W) | Maximum Power Consumptiona (W) |
---|---|---|---|
TN11LQMS | 12800 ps/nm-C Band-Fixed Wavelength-NRZ-PIN 12800 ps/nm-C Band-Fixed Wavelength-NRZ-APD 6500 ps/nm-C Band-Fixed Wavelength-NRZ-PIN 3200 ps/nm-C Band-Fixed Wavelength-NRZ-APD 1600 ps/nm-CWDM Band-Fixed Wavelength-NRZ-APD | 56.3 | 64.5 |
12800 ps/nm-C Band-Tunable Wavelength-NRZ-APD 6400 ps/nm-C Band-Tunable Wavelength-NRZ-APD (Four Channels-Tunable) | 60.4 | 66.4 | |
TN12LQMS | 12800 ps/nm-C Band-Fixed Wavelength-NRZ-APD 12800 ps/nm-C Band-Tunable Wavelength-NRZ-APD 6400 ps/nm-C Band-Tunable Wavelength-NRZ-APD (Four Channels-Tunable) | 29 | 32.3 |
a: The maximum power consumption is the power consumed by the board when it works normally under the highest ambient temperature. |
Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.
Delivery Options | Estimated Delivery Time |
---|---|
DHL | 3-5 business days |
Fedex | 3-5 business days |
By Sea | 10-20 business days |
Notice:
Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:
Deliver to port:
Uonel is responsible for transporting goods to port. All
subsequent customs and transportation fees are the
responsibility of the buyer. Uonel will recommend trustworthy
local freight forwarders to you.Uonel can facilitate the progress
under buyer's permission and at buyer's expense.
Deliver to door:
Uonel will quote all destination charge prior once we have
confirmed order.
Uonel is responsible for transporting goods to door after you
have made the payment.
100% Low Price Guarantee:
Uonel provides
high-quality products at low wholesale prices
100% Quality Assurance:
All items are
ORIGINAL NEW and GENUINE only.
Free Technical Support:
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee:
You can contact our customer service team to exchange or return any
product that you bought from us.
Flexible Secure Payment & Shipment:
Verified
authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Hardware Warranty Policy:
Original new sealed product: 1 Year
The Support Contacts:
If your products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Uonel is one of the biggest Network Hardware distributor in china, founded in 2008. We are a global provider of netwotking products with more than 5000 customers.
We provide original new Routers,Switches,Firewalls,Wireless APs & controllers,OLTs,GPON modems,optical transceivers.Our company have more than $5million products in stock.
Most of our technical engineers had work exprience in company,we can provide network design&planning,configration,troubleshooting,maintenance and training service in world wide.