Home Companies Uonel Co.Limtied

OptiX OSN 8800 TN12LTXT11 10-Port 10Gbit/s Service Multiplexing & Optical Wavelength Conversion Board-- OSN8800

Uonel Co.Limtied
Active Member

Contact Us

[China] country

Address: B-1906,Zhantao-Tech mansion ,Minzhi road 1079,longhua Dis,shenzhen 518110 China

Contact name:Leo yang

Inquir Now

Uonel Co.Limtied

OptiX OSN 8800 TN12LTXT11 10-Port 10Gbit/s Service Multiplexing & Optical Wavelength Conversion Board-- OSN8800

Country/Region china
City & Province shenzhen
InquireNow

Product Details

Contact Us

  

 

 

Functions and Features

The LTX board is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC.

For detailed functions and features, see Table 1 and Table 2.

Table 1 Functions and features of the LTX board (OTU mode)
Function and FeatureDescription
Basic function

LTX converts signal as follows:

  • TN11LTX: 10x10GE LAN/10GE WAN/STM-64/OC-192<->1xOTU4
  • TN12LTX: 10x 10GE LAN/10GE WAN/STM-64/OC-192/OTU2/OTU2e<->1x OTU4
  • TN15LTX/TN17LTX: 10x 10GE LAN/10GE WAN/STM-64/OC-192/OTU2/OTU2e/FC1200/FC800<->1x OTU4
Client-side service type

10GE LAN: Ethernet service at a rate of 10.31 Gbit/s

10GE WAN: Ethernet service at a rate of 9.95 Gbit/s

STM-64/OC-192: SDH/SONET service at a rate of 9.95 Gbit/s

OTU2: OTN service at a rate of 10.71 Gbit/s

OTU2e: OTN service at a rate of 11.1 Gbit/s

FC1200: SAN service at a rate of 10.51 Gbit/s

FC800: SAN service at a rate of 8.5 Gbit/s

OTN function
  • Provides the OTU4 interface on WDM-side.
  • Supports the OTN frame format and overhead processing compliant with ITU-T G.709.
  • ODUk (k=2, 4, ODUflex) layer: supports the PM and TCM function, and PM and TCM non-intrusive monitoring functions.
  • Supports SM function for OTU2.
  • Supports SM function for OTU4.
NOTE:
The functions on ODUflex layer are only supported by TN15LTX/TN17LTX, the TCM and TCM non-intrusive monitoring function on ODU2 layer are only supported by TN15LTX/TN17LTX.
WDM specification

Supports ITU-T G.694.1-compliant DWDM specifications.

Tunable wavelength function

The board can tune the optical signal output on the WDM side within the range of 80 wavelengths in C-band with the channel spacing of 50 GHz.

ESC functionSupported on the WDM-side, supported by the TN12LTX/TN15LTX/TN17LTX when the client-side service type is OTU2 or OTU2e.
NOTE:
When being provisioned with the OTU2/OTU2e service on the client side, the board supports ESC transparent transmission, but not ESC processing.

When the ESC function is required, the TN15LTX/TN17LTX board receives one to six signals on the client side.

PRBS test function

Supports the PRBS function on the client and WDM sides.

NOTE:
The PRBS function on the client side is supported only when the client-side service type is STM-64/OC-192/OTU2/OTU2e.
LPT functionThe board supports the LPT function only when the client-side service type is 10GE LAN.
FEC coding
  • Client side:

    TN12LTX: When OTU2/OTU2e services are provisioned, the client-side TX port supports FEC coding that is compliant with ITU-T G.709 and the client-side RX port does not support FEC decoding.

    TN15LTX/TN17LTX: When OTU2/OTU2e services are provisioned, the board supports FEC and AFEC.

  • WDM side:

    TN11LTX supports HFEC and SDFEC.

    TN12LTX supports HFEC and SDFEC.

    TN15LTX/TN17LTX supports SDFEC2.

NOTE:
Boards that use different FEC modes cannot interconnect with each other.
Alarms and performance events monitoring
  • Monitors BIP8 bytes (Bursty mode) to help locate line failures.
  • Monitors B1 bytes to help locate faults.
  • Monitors OTN alarms and performance events.
  • Monitors parameters such as the bias current, temperature, and optical power of the laser.
  • Supports the remote monitoring (RMON) of Ethernet services (10GE LAN).
  • Supports the monitoring of CD and PMD performance.
Regeneration board
The WDM-side signals of an LTX board can be regenerated using the LTX, NS4 board of the same type.For example,
  • The type of the TN11LTXT01 board is T01,and the WDM-side signals of the TN11LTXT01 board can be regenerated using the LTX, NS4 board of the T01 type, such as TN54NS4T01, TN57NS4T01,TN11LTXT01,TN12LTXT01.
ALS function

Supports the ALS function on the client side when client services are non-OTN services.

Test frame

TN11LTX/TN12LTX: Not supported

TN15LTX/TN17LTX: Supports the test frame function when the board receives 10GE LAN services and the port mapping is MAC Transparent Mapping(10.7G) on its client side.

Latency measurement

The TN12LTX/TN15LTX/TN17LTX board support latency measurement. The bidirectional latency at the ODUk layer between two OTU boards supporting the latency measurement function can be measured, and the latency data is displayed on the U2000.

NOTE:

When the client service is OTU2/OTU2e, only the TN17LTX board supports TCM latency measurement.

The latency measurement function can be configured only on one port at a time.

IEEE 1588v2Not supported
Physical clockWhen the board receives 10GE LAN services and the port mapping is Bit Transparent Mapping (11.1 G) on its client side, the board can support synchronous Ethernet transparent transmission instead of synchronous Ethernet processing.
Optical-layer ASONSupported
Electrical-layer ASONNot supported
Protection scheme
  • Supports client 1+1 protection.
  • Supports intra-board 1+1 protection (when working with the OLP/DCP/QCP board).
Ethernet service mapping mode

TN11LTX/TN12LTX: Bit Transparent Mapping (11.1G)

TN15LTX/TN17LTX: Bit Transparent Mapping (11.1G)and MAC Transparent Mapping(10.7G)

LoopbackClient sideInloopSupported
Outloop
WDM sideInloopSupported
Outloop

Protocols or standards compliance

Protocols or standards for transparent transmission (non-performance monitoring)

IEEE 802.3ae

ITU-T G.707

ITU-T G.782

ITU-T G.783

GR-253-CORE Synchronous Optical Network (SONET) Transport Systems: Common Generic

NCITS FIBRE CHANNEL PHYSICAL INTERFACES (FC-PI)

NCITS FIBRE CHANNEL LINK SERVICES (FC-LS)

NCITS FIBRE CHANNEL FRAMING AND SIGNALING-2 (FC-FS-2)

NCITS FIBRE CHANNEL BACKBONE-3 (FC-BB-3)

NCITS FIBRE CHANNEL SWITCH FABRIC-3 (FC-SW-3)

Protocols or standards for service processing (performance monitoring)

ITU-T G.805

ITU-T G.806

ITU-T G.709

ITU-T G.872

ITU-T G.7710

ITU-T G.798

ITU-T G.874

ITU-T M.3100

ITU-T G.874.1

ITU-T G.875

ITU-T G.808.1

ITU-T G.841

ITU-T G.8201

ITU-T G.694.1

Table 2 Functions and features of the LTX board (regeneration mode)
Function and FeatureDescription
Basic function

The board is used in an electrical REG station in the system to implement electrical regeneration of optical signals.

Regenerating rate

OTU4: OTN service at a rate of 111.81 Gbit/s

OTN function
  • Provides the OTU4 interface on WDM-side.
  • Supports the OTN frame format and overhead processing compliant with ITU-T G.709.
  • Supports PM and TCM functions for ODU4.
  • Supports TCM non-intrusive monitoring for ODU4.
  • Supports SM functions for OTU4.
WDM specification

Supports ITU-T G.694.1-compliant DWDM specifications.

Tunable wavelength function

The board can tune the optical signal output on the WDM side within the range of 80 wavelengths in C-band with the channel spacing of 50 GHz.

ESC functionSupported
PRBS test function

Not supported

LPT functionNot supported
FEC encoding

TN11LTX/TN12LTX supports HFEC and SDFEC on the WDM side.

TN15LTX/TN17LTX supports SDFEC2 on the WDM side.

NOTE:
Boards that use different FEC modes cannot interconnect with each other.
Alarms and performance events monitoring
  • Monitors BIP8 bytes (Bursty mode) to help locate line failures.
  • Monitors OTN alarms and performance events.
  • Monitors parameters such as the bias current, temperature, and optical power of the laser.
ALS functionNot supported
Test frameNot supported
Optical-layer ASONSupported
Electrical-layer ASONNot supported
Protection schemeNot supported
LoopbackNot supported

Protocols or standards compliance

Protocols or standards for transparent transmission (non-performance monitoring)

-

Protocols or standards for service processing (performance monitoring)

ITU-T G.805

ITU-T G.806

ITU-T G.709

ITU-T G.872

ITU-T G.7710

ITU-T G.798

ITU-T G.874

ITU-T M.3100

ITU-T G.874.1

ITU-T G.875

ITU-T G.808.1

ITU-T G.841

ITU-T G.8201

ITU-T G.694.1

Mechanical Specifications

  • Dimensions of front panel (H x W x D):

    TN11LTX/TN12LTX: 264.6 mm (10.4 in.) x 101.6 mm (4.0 in.) x 220 mm (8.7 in.)

    TN15LTX/TN17LTX: 264.6 mm (10.4 in.) x 50.8 mm (2.0 in.) x 220 mm (8.7 in.)

  • Weight:

    TN11LTX/TN12LTX: 5.8 kg (12.8 lb.)

    TN15LTX: 3 kg (6.6 lb.)

    TN17LTX: 2.7 kg (5.96 lb.)

Power Consumption

BoardWDM-Side ModuleTypical Power Consumption (W)Maximum Power Consumptiona (W)
TN11LTX (OTU mode)40000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(HFEC)-PIN248273
TN11LTX (regeneration mode)235247
TN11LTX (OTU mode)55000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC)-PIN270300
TN11LTX (regeneration mode)250275
TN12LTX (OTU mode)40000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(HFEC)-PIN248273
TN12LTX (regeneration mode)235247
TN12LTX (OTU mode)55000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC)-PIN270300
TN12LTX (regeneration mode)250275
TN15LTX (OTU mode)

150000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2)-PIN

55000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2)-PIN

40000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2)-PIN

150000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2,wDCM)-PIN

12000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2,wDCM-Metro)-PIN

176190
TN15LTX (regeneration mode)160173
TN17LTX (OTU mode)

150000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2)-PIN

55000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2)-PIN

40000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2)-PIN

150000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2,wDCM)-PIN

12000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2,wDCM-Metro)-PIN

120000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2)-PIN

120000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2, wDCM)-PIN

142

152

TN17LTX (regeneration mode)126135
a: The maximum power consumption is the power consumed by the board when it works normally under the highest ambient temperature.
 
  
Delivery

Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.

Delivery OptionsEstimated Delivery Time
DHL3-5 business days
 Fedex3-5 business days
 By Sea10-20 business days

Notice:

 

Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:

 

Deliver to port:

 

Uonel is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Uonel will recommend trustworthy local freight forwarders to you.Uonel can facilitate the progress under buyer's permission and at buyer's expense.

 

Deliver to door:

 

Uonel will quote all destination charge prior once we have confirmed order.
Uonel is responsible for transporting goods to door after you have made the payment.

Warranty

   100% Low Price Guarantee:
              Uonel provides high-quality products at low wholesale prices


   100% Quality Assurance:
              All items are ORIGINAL NEW  and GENUINE only.
                    


   Free  Technical Support:

              Our FREE  Expert Consultancy Support is over the phone, by chat, by email or by login remotely.


  100% Money Back Guarantee:
             You can contact our customer service team to exchange or return any product that you bought from us.


  Flexible Secure Payment & Shipment:
             Verified authorization: Mcafee Secure, VeriSign Secured

Return Material Authorization (RMA) Process

  

Standard Hardware Warranty Policy:

 

Original new sealed  product: 1 Year

  

The Support Contacts:

  

If your  products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.

Company Profile

Uonel is one of the biggest Network Hardware distributor in china, founded in 2008. We are a global provider of netwotking  products with more than 5000 customers.

We provide original new Routers,Switches,Firewalls,Wireless APs & controllers,OLTs,GPON modems,optical transceivers.Our company have more than $5million products in stock.

Most of our technical engineers had work exprience in company,we can provide network design&planning,configration,troubleshooting,maintenance and training service in world wide.












Hot Products

Contact Us Functions and Features The LSQ board is mainly used to achieve wavelength tunable and to ...
Contact Us Functions and Features The LTX board is mainly used to achieve wavelength tunable and to ...
Contact Us Functions and Features The LTX board is mainly used to achieve wavelength tunable and to ...
Contact Us Functions and Features The LTX board is mainly used to achieve wavelength tunable and to ...
Contact Us Functions and Features The LTX board is mainly used to achieve wavelength tunable and to ...
Contact Us Functions and Features The LTX board is mainly used to achieve wavelength tunable and to ...