Home Companies Uonel Co.Limtied

OptiX OSN 8800 TN11DAS1 double optical amplifier unit with supervisory channel-- OSN8800

Uonel Co.Limtied
Active Member

Contact Us

[China] country

Address: B-1906,Zhantao-Tech mansion ,Minzhi road 1079,longhua Dis,shenzhen 518110 China

Contact name:Leo yang

Inquir Now

Uonel Co.Limtied

OptiX OSN 8800 TN11DAS1 double optical amplifier unit with supervisory channel-- OSN8800

Country/Region china
City & Province shenzhen
InquireNow

Product Details

Contact Us

  

 

 

Functions and Features

The DAS1 board integrates the functions of an optical amplifier unit, an FIU board (used to multiplexes the main optical channel and supervisory channel or demultiplexes the supervisory channel from the main channel signal), and an optical supervisory board. It supports gain adjustment, in-service monitoring of optical performance, gain locking, and transient state control.

For detailed functions and features, refer to Table 1.

Table 1 Functions and features of the DAS1 board
Function and FeatureDescription
Basic function
  • Amplifies the input optical signals in C band. The total wavelengths range from 1529 nm to 1561 nm.
  • Supports the system to transmit services over different fiber spans without electrical regeneration.
  • Multiplexes and demultiplexes signals transmitted along the main path and optical supervisory channel.
  • Processes one channel of optical supervisory signals.
  • Supports transparent transmission of one channel of FE electrical signals.
Gain adjustment

The DAS1 board continuously adjusts the gain from 20 dB to 31 dB based on the input optical power.

Online optical performance monitoringProvides the online monitoring interface. A small number of EDFA-amplified optical signals is output through this interface to the optical spectrum analysis board. In this manner, the spectrum and optical performance of the multiplexed signal are monitored without interrupting the services.
Gain lock functionThe EDFA inside the board has the gain lock function. Adding or dropping one or more channels or optical signal fluctuation does not affect the signal gain of other channels.
Working mode

Supports the gain locking and power locking modes.

  • In the gain locking mode, the gain of the board is tunable and users can query the actual gain of the board. The gain locking mode is enabled by default.
  • The power locking mode applies to scenarios in which there is only dummy light to lock the output power of the board.
Transient control functionThe EDFA inside the board has the transient control function. When channels are added or dropped, the board can suppress the fluctuation of the optical power in the path so as to implement the smooth upgrading and expansion.
Alarms and performance events monitoring
  • Detects and reports the optical power.
  • Monitors the temperature of the pump laser.
  • Detects the pump driving current, back facet current, pump cooling current, temperature of the pump laser and the ambient temperature of the board.
OSC signal regenerationThe DAS1 board transmits signals from section to section. It also has the 3R function. In each regenerating station that has optical amplifiers, information can be correctly received and new supervisory signals are added.
Operating wavelength for OSC signals

1511nm

Optical-layer ASON

Supported

eSFPThe RX/TX optical port supports pluggable optical modules.

 

 

DAS1 Specifications

Specifications include optical specifications, dimensions, weight, and power consumption.

Optical Specifications

Table 1 Optical specifications of the TN11DAS1 board
ItemUnitValue
Specifications of OAOperating wavelength rangenm1529-15611529-15611529-1561
Nominal gaindB202631
Nominal input power rangedBm-32 to 0-32 to -6-32 to -11
Input power range per channel40 channelsdBm-32 to -16-32 to -22-32 to -27
80 channelsdBm-32 to -19-32 to -25-32 to -30
Nominal single-wavelength input optical power40 channelsdBm-16-22-27
80 channelsdBm-19-25-30
Nominal single-wavelength output optical power40 channelsdBm444
80 channelsdBm111
Noise figure (NF)adB<= 8.5<= 5.5<= 5.5
Gain response time on adding/dropping of channelsms< 10< 10< 10
Channel gaindB20 to 31
Gain flatnessdB<= 2.0<= 2.0<= 2.0
Multi-channel gain slopedB/dB<= 2.0<= 2.0<= 2.0
Input reflectancedB< -40< -40< -40
Output reflectancedB< -40< -40< -40
Pump leakage at inputdBm< -30< -30< -30
Maximum reflectance tolerance at inputdB-27-27-27
Maximum reflectance tolerance at outputdB-27-27-27
Maximum total output optical powerdBm202020
Polarization dependent lossdB<= 0.5<= 0.5<= 0.5
Input VOA inherent insertion lossdB<= 1.5
Input VOA dynamic attenuation rangedB20
Input VOA adjustment accuracydB1
Specifications of demultiplexer and multiplexerOperating wavelength range of optical supervisory channelnm1480 to 1520
Optical return lossdB> 40
Insert loss of optical supervisory channelLIN-TMdB<= 1.5
RM-LOUT
Insert loss of C-banddB<= 1
Polarization dependent lossdB< 0.2
Specifications of OSC optical moduleOperating wavelength rangenm1504.5 to 1517.5
Signal rateMbit/s155.52
Launched optical powerdBm0.5 to 5
Receiver sensitivitydBm<= -41
Receiver overloaddBm-10
a: The gain can be adjusted continuously. The noise figure varies with the gain. The previous table lists the noise figure when the noise figure uses the typical value.
NOTE:

The board supports a ±2.5 dB extended gain. The extended gain is only for the temporary use because it affects the gain flatness.

Mechanical Specifications

  • Dimensions of front panel (H x W x D): 264.6 mm (10.4 in.) x 25.4 mm (1.0 in.) x 220 mm (8.7 in.)
  • Weight: 1.4 kg (3.1 lb.)

Power Consumption

BoardTypical Power Consumption (W)Maximum Power Consumptiona (W)
TN11DAS12228.6
a: The maximum power consumption is the power consumed by the board when it works normally under the highest ambient temperature.
 
   
Delivery

Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.

Delivery OptionsEstimated Delivery Time
DHL3-5 business days
 Fedex3-5 business days
 By Sea10-20 business days

Notice:

 

Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:

 

Deliver to port:

 

Uonel is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Uonel will recommend trustworthy local freight forwarders to you.Uonel can facilitate the progress under buyer's permission and at buyer's expense.

 

Deliver to door:

 

Uonel will quote all destination charge prior once we have confirmed order.
Uonel is responsible for transporting goods to door after you have made the payment.

Warranty

   100% Low Price Guarantee:
              Uonel provides high-quality products at low wholesale prices


   100% Quality Assurance:
              All items are ORIGINAL NEW  and GENUINE only.
                    


   Free  Technical Support:

              Our FREE  Expert Consultancy Support is over the phone, by chat, by email or by login remotely.


  100% Money Back Guarantee:
             You can contact our customer service team to exchange or return any product that you bought from us.


  Flexible Secure Payment & Shipment:
             Verified authorization: Mcafee Secure, VeriSign Secured

Return Material Authorization (RMA) Process

  

Standard Hardware Warranty Policy:

 

Original new sealed  product: 1 Year

  

The Support Contacts:

  

If your  products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.

Company Profile

Uonel is one of the biggest Network Hardware distributor in china, founded in 2008. We are a global provider of netwotking  products with more than 5000 customers.

We provide original new Routers,Switches,Firewalls,Wireless APs & controllers,OLTs,GPON modems,optical transceivers.Our company have more than $5million products in stock.

Most of our technical engineers had work exprience in company,we can provide network design&planning,configration,troubleshooting,maintenance and training service in world wide.












Hot Products

Contact Us Functions and Features During the long-haul transmission of optical signals, the ...
Contact Us Functions and Features The main function and feature supported by the CRPC board is ...
Contact Us Functions and Features The main function and feature supported by the CRPC board is ...
Contact Us Functions and Features The main function and feature supported by the CRPC board is ...
Contact Us Functions and Features The DAS1 board integrates the functions of an optical amplifier ...
Contact Us Functions and Features The HBA board is mainly used for online optical performance ...