Uonel Co.Limtied |
|
The TOM board achieves cross-connection at the electrical layer, and to provide OTN interfaces and ESC.
For detailed functions and features, refer to Table 1.
Function and Feature | Description | ||
---|---|---|---|
Basic function |
The TOM board supports multiple application scenarios. For details, see Application Overview. | ||
Client-side service type | FE: Ethernet service at a rate of 125 Mbit/s or 12.5 Mbit/s GE: Ethernet service at a rate of 1.25 Gbit/s. Supports GE optical signals and GE electrical signals. OTU1: OTN service at a rate of 2.67 Gbit/s STM-1/OC-3: SDH/SONET service at a rate of 155.52 Mbit/s STM-4/OC-12: SDH/SONET service at a rate of 622.08 Mbit/s STM-16/OC-48: SDH/SONET service at a rate of 2.5 Gbit/s FC100: SAN service at a rate of 1.06 Gbit/s FC200: SAN service at a rate of 2.12 Gbit/s FICON: SAN service at a rate of 1.06 Gbit/s FICON Express: SAN service at a rate of 2.12 Gbit/s HD-SDI: Bit-serial digital interface for high-definition television systems at a rate of 1.49 Gbit/s DVB-ASI: Video service at a rate of 270 Mbit/s SDI: Serial digital interface at a rate of 270 Mbit/s ESCON: SAN service at a rate of 200 Mbit/s FDDI: SAN service at a rate of 125 Mbit/s NOTE: When the TOM board transmits GE electrical signals, it is recommended that the board be equipped with at most two GE electrical modules to facilitate fiber routing. you are advised to install electrical modules at the RX1/TX1 and RX2/TX2 ports. The TOM board supports access of SDI, HD-SDI, and DVB-ASI electrical signals. When the board is used to accept these electrical signals, a digital video O/E converter must be used for O/E or E/O conversion and the optical module of the converter must agree with the board optical module specifications. The digital video O/E converter is a third-party device. Customers can purchase a digital video O/E converter by themselves. | ||
OTN function |
| ||
WDM specification | Supports ITU-T G.694.1-compliant DWDM specifications. Supports ITU-T G.694.2-compliant CWDM specifications. | ||
ESC function | Supported. | ||
FEC coding | Supports forward error correction (FEC) on the client side that complies with ITU-T G.709, only when the service type is OTU1. | ||
Alarm and performance event monitoring |
| ||
ALS function | Supports the ALS function on the client side. | ||
PRBS test function | Supports the PRBS function on the client side and WDM side. NOTE: The PRBS function on the client side is supported only when the
client-side service type is STM-1/OC-3, STM-4/OC-12, or
STM-16/OC-48. | ||
LPT function | The board supports the LPT function only when the client-side service type is FE or GE. | ||
Test frame | The board supports the test frame function only when the client-side service type is FE or GE. | ||
IEEE 1588v2 | Not supported | ||
Physical clock | Not supported | ||
Protection scheme |
| ||
Ethernet service mapping mode | Supports encapsulation of GE services in GE(GFP-F) (displayed as GE on the NMS) and GE(GFP-T) modes. | ||
Ethernet port working mode |
| ||
Port MTU | The value ranges from 1518 to 9600, in bytes. That is, the maximum size of the supported Jumbo frame is 9600 bytes. | ||
Loopback | WDM side | Inloop | Supported |
Outloop | Supported NOTE: When being used as tributary & line board, the TOM board only supports the loopback between ClientLP1-ClientLP4. | ||
Client side | Inloop | Supported | |
Outloop | Supported | ||
Channel | Inloop | Supported | |
Outloop | Supported | ||
Protocol or standard compliance | Protocols or standards (non-performance monitoring) with which transparently transmitted services comply | IEEE 802.3u IEEE 802.3z ITU-T G.707 ITU-T G.782 ITU-T G.783 GR-253-CORE Synchronous Optical Network (SONET) Transport Systems: Common Generic NCITS FIBRE CHANNEL PHYSICAL INTERFACES (FC-PI) NCITS FIBRE CHANNEL LINK SERVICES (FC-LS) NCITS FIBRE CHANNEL FRAMING AND SIGNALING-2 (FC-FS-2) NCITS FIBRE CHANNEL BACKBONE-3 (FC-BB-3) NCITS FIBRE CHANNEL SWITCH FABRIC-3 (FC-SW-3) NCITS FIBRE CHANNEL - PHYSICAL AND SIGNALING INTERFACE (FC-PH) NCITS FIBRE CHANNEL SINGLE-BYTE COMMAND CODE SETS-2 MAPPING PROTOCOL (FC-SB-2) SMPTE 292M Bit-Serial Digital Interface for High-Definition Television Systems ETSI TR 101 891 Professional Interfaces: Guidelines for the implementation and usage of the DVB Asynchronous Serial Interface (ASI) SMPTE 259M 10-Bit 4:2:2 Component and 4fsc Composite Digital Signals - Serial Digital Interface NCITS SBCON Single-Byte Command Code Sets CONnection architecture (SBCON) ANSI X3.139 Information Systems - Fiber Distributed Data Interface(FDDI) - Token Ring Media Access Control(MAC) ANSI X3.148 Information Systems - Fiber Distributed Data Interface(FDDI) - Token Ring Physical Layer Protocol(PHY) ANSI X3.166 Information Systems - Fiber Distributed Data Interface(FDDI) Physical Layer Medium Dependent(PDM) | |
Protocols or standards (performance monitoring) for processing services | ITU-T G.805 ITU-T G.806 ITU-T G.709 ITU-T G.872 ITU-T G.7710 ITU-T G.798 ITU-T G.874 ITU-T M.3100 ITU-T G.874.1 ITU-T G.875 ITU-T G.808.1 ITU-T G.841 ITU-T G.8201 ITU-T G.873.1 ITU-T G.694.1 ITU-T G.694.2 |
TN52TOM: 1.5 kg (3.3 lb.)
Board | Typical Power Consumption (W) | Maximum Power Consumptiona (W) |
---|---|---|
TN52TOM | 81 | 89.1 |
a: The maximum power consumption is the power consumed by the board when it works normally under the highest ambient temperature. |
Delivery Options | Estimated Delivery Time |
---|---|
DHL | 3-5 business days |
Fedex | 3-5 business days |
By Sea | 10-20 business days |
Notice:
Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:
Deliver to port:
Uonel is responsible for transporting goods to port. All
subsequent customs and transportation fees are the
responsibility of the buyer. Uonel will recommend trustworthy
local freight forwarders to you.Uonel can facilitate the progress
under buyer's permission and at buyer's expense.
Deliver to door:
Uonel will quote all destination charge prior once we have
confirmed order.
Uonel is responsible for transporting goods to door after you
have made the payment.
100% Low Price Guarantee:
Uonel provides
high-quality products at low wholesale prices
100% Quality Assurance:
All items are
ORIGINAL NEW and GENUINE only.
Free Technical Support:
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee:
You can contact our customer service team to exchange or return any
product that you bought from us.
Flexible Secure Payment & Shipment:
Verified
authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Hardware Warranty Policy:
Original new sealed product: 1 Year
The Support Contacts:
If your products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Uonel is one of the biggest Network Hardware distributor in china, founded in 2008. We are a global provider of netwotking products with more than 5000 customers.
We provide original new Routers,Switches,Firewalls,Wireless APs & controllers,OLTs,GPON modems,optical transceivers.Our company have more than $5million products in stock.
Most of our technical engineers had work exprience in company,we can provide network design&planning,configration,troubleshooting,maintenance and training service in world wide.