Uonel Co.Limtied |
|
H802OPGE Board
The H802OPGE board is a 48-port GE/FE Optical interface board, providing Ethernet optical access and cascading. It supports up to 48 channels of GE/FE P2P access services.
Specifications
Please refer to .
When you use H802OPGE boards to replace H802OPGD boards that are bound together, pay attention to the following items:
For V800R013C00 or earlier versions, you need to remove the 2 H802OPGD boards that are bound together and then replace them with H802OPGE boards. Note that the H802OPGD board and the H802OPGE board cannot be installed in the 2 slots (that are bound together) at the same time.
For V800R013C10 or later versions, you need to remove one of the 2 H802OPGD boards (that are bound together) and then install 1 H802OPGE board. After the H802OPGE board starts up and functions normally, replace another H802OPGD board.
Parameters
Power Consumption and Maximum Frame Size of Boards
You can query power consumption, maximum frame size, and normal operating temperature of all boards.
lists the power consumption and maximum frame size of boards. "-" indicates N/A.
The operating temperature of all the boards is -40°C to +65°C. The lowest board startup temperature is -25°C.
NOTE:
The power consumption of the board is tested in the following conditions:
Working voltage: -53.5 V DC.
Ambient temperature: 25 °C.
Static power consumption: All ports do not carry any loads. Specifically, users under POTS ports hang up phones, xDSL ports are deactivated, and optical modules are not installed on optical ports
Maximum power consumption: All ports fully carry loads. However, only 25% users under POTS ports concurrently pick up phones and the feeding current is 20 mA.
The board power consumption slightly varies with the power module configured for the board and discreteness of components.
Table 1 Power consumption and maximum frame size of boards
Board | Power Consumption | Maximum Frame Size |
P2P interface board | ||
H802OPGE | Static: 53 W Maximum: 90 W | 2004 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported. |
Front Panel Port
Cable
The LC optical connector used in H802OPGE is shorter than the average LC optical connector.
Indicator
Indicator | Name | Status | Meaning |
RUN ALM | Running status indicator | Red: blinks | The board enters the APP start phase during the board startup |
Green: blinks every 0.25s | The board enters the phase of communication with the control board during its startup | ||
Green: blinks every 1s | The board works in the normal state | ||
Orange: blinks | A high-temperature alarm is generated | ||
Red: on | The board is faulty | ||
0-47 NOTE: Only LEDs with the even IDs are valid when the port is connected to a one-channel optical module. | Link status indicator | Green: on | The connection is successful |
Green: off | The connection fails | ||
Green: blinks | Data is being transmitted |
Return Material Authorization (RMA) Process
Standard Hardware Warranty Policy:
Original new sealed ZTE product: 1 Year
The Support Contacts:
If your ZTE products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.
Uonel is one of the biggest Huawei Network Hardware distributor in china, founded in 2008. We are a global provider of netwotking products with more than 5000 customers.
We provide original new Huawei Routers,Switches,Firewalls,Wireless APs & controllers,OLTs,GPON modems,optical transceivers.Our company have more than $5million Huawei products in stock.
Most of our technical engineers had work exprience in Huawei company,we can provide network design&planning,configration,troubleshooting,maintenance and training service in world wide.