Home Companies Uonel Co.Limtied

OptiX OSN 3500 SSN1PEX1 1x10GE Ethernet processing board-- OSN3500

Active Member

Contact Us

[China]

Address: B-1906,Zhantao-Tech mansion ,Minzhi road 1079,longhua Dis,shenzhen 518110 China

Contact name:Leo yang

Uonel Co.Limtied

OptiX OSN 3500 SSN1PEX1 1x10GE Ethernet processing board-- OSN3500

Country/Region	china
City & Province	shenzhen
Categories	Solar Chargers

Product Details

Functions and Features

PEX1 boards process and forward 1x10 Gbit/s Ethernet services and support QoS functions such as traffic management, congestion control, and queue scheduling for data packets.

Table 1 lists the functions and features supported by PEX1 boards.

Table 1 Functions and features supported PEX1 boards

Function and Feature		Description
Basic functions		Receives/Transmits and processes 1x10 GE services.
Port types		N1PEX1 supports 10GBASE-LR (LAN), 10GBASE-LW (WAN), 10GBASE-ER (LAN), 10GBASE-EW (WAN), 10GBASE-ZR (LAN), and 10GBASE-ZW (WAN) Ethernet optical ports. The optical ports use LC connectors and support the transmission distances of 10 km, 40 km, and 80 km. N2PEX1 supports 10GBASE-LR (LAN), 10GBASE-ER (LAN), and 10GBASE-ZR (LAN) Ethernet optical ports. The optical ports use LC connectors and support the transmission distances of 10 km, 40 km, and 80 km. N2PEX1 supports CWDM and DWDM colored optical ports. The optical ports use LC connectors. CWDM optical ports support the transmission distance of 70 km. DWDM optical ports support the transmission distance of 40/80 km.
Functions when being used with an interface board		A PEX1 board does not support an interface board, and provides one 10GE port on the front panel.
Port characteristics	Pluggable optical module	Supports XFP optical modules.
	Single-fiber bidirectional optical module	Not supported
	Working modes	N1PEX1 boards support 10GE full-duplex in both LAN (default) and WAN mode. N2PEX1 boards support 10GE full-duplex in LAN mode.
	Flow control at ports	Auto-negotiation mode: not supported
	Flow control at ports	Non-autonegotiation mode: not supported by N1PEX1 boards but supported by N2PEX1 boards
	Query/Setting of port status	Supported
	Query of port types	Supported
	Query/Setting of optical power thresholds	Supported
	Query/Setting of unidirectional-mode	Not supported by N1PEX1 boards but supported by N2PEX1 boards
Service specifications	Processing capability	Processes 10 Gbit/s services in full-duplex mode.
	Service bearing modes	MPLS: supported
		QinQ: supported
		Port: supported
	PW specifications	Maximum number of PWs: 16K
	PW specifications	Maximum number of MS-PWs: 8K
	Tunnel specifications	Number of unidirectional MPLS tunnels (with tunnels shared): N1PEX1: 4K N2PEX1: When working with the N4GSCC: 4K When working with the N6GSCC: 16K
	Tunnel specifications	Number of bidirectional MPLS tunnels (with tunnels shared): N1PEX1: 2K N2PEX1: When working with the N4GSCC: 2K When working with the N6GSCC: 8K
	MFL for ports	Supports the setting of the packet length, which ranges from 960 bytes to 9600 bytes. After the setting becomes valid, the length of the packets that enter or exit the ports is restricted by the preset MFL.
	MTU for services	For packet services carried by PWs, N1PEX1 boards support the setting of the packet length, which ranges from 64 bytes to 9600 bytes. For packet services carried in other modes, N1PEX1 boards support the setting of the packet length, which ranges from 64 bytes to 9600 bytes. For packet services carried by PWs, N2PEX1 boards support the setting of the packet length, which ranges from 64 bytes to 9600 bytes. For packet services carried in other modes, N2PEX1 boards do not support the setting of the packet length.
	Ethernet service capability	E-Line service: supported Number of supported E-Line services: When working with an N4GSCC board: 4K When working with an N6GSCC board: 8K
		E-LAN service: supported Number of supported E-LAN services: 1020 Number of static MAC addresses in E-LAN services: 2K
		E-AGGR service: supported An N1PEX1 board supports four E-AGGR services, each of which supports 127 leaf ports. An N2PEX1 board does not support E-AGGR services.
	Formats of Ethernet data frames	Supports the encapsulation in IEEE 802.3 format, Ethernet II format, or IEEE 802.1q/p format.
	Maximum number of QinQ links	1K
	Jumbo frame	Supports a jumbo frame with a maximum length of 9600 bytes.
Protection schemes	Tunnel APS	Supports the 1+1 (single-ended/dual-ended) and 1:1 (dual-ended) tunnel APS in compliance with ITU-T Y.1720 and ITU-T G.8131. When working with an N4GSCC board: 1K When working with an N6GSCC board: 4K
	PW APS	Supports the 1+1 (single-ended/dual-ended), 1:1 (dual-ended) PW APS and PW FPS (single-ended) PW APS (only on N2PEX1 boards). Supports a maximum of 1K PW APS protection groups, and a PW protection group can bind a maximum of 512 members (only on N2PEX1 boards) in compliance with ITU-T Y.1720 and ITU-T G.8131. NOTE: PW APS and tunnel APS share the protection resources.
	MRPS	N1PEX1 not support MRPS. Supports MRPS(only on N2PEX1 boards): Protection group type: two-fiber bidirectional Switching type: wrapping switching
	LAG	Supports manual link aggregation and static link aggregation. Supports the load sharing mode and load non-sharing mode. Complies with IEEE 802.3ad and IEEE 802.1AX.
	MC-LAG	Supported only on N2PEX1 boards, which complies with IEEE 802.3ad and IEEE 802.1AX.
	MSTP	Supported only on N2PEX1 boards, which complies with IEEE 802.1s.
	LPT	Point-to-point LPT: supported
	LPT	Point-to-multipoint LPT: supported
	ETH-TRUNK	N2PEX1 Supported
Synchronization	Synchronous Ethernet Clock	Supports one channel of synchronous Ethernet clock signals.
Synchronization	1588v2	Supports one channel of the IEEE 1588v2 time synchronization and clock synchronization (only on N2PEX1 boards).
Maintenance features	ETH OAM	Ethernet Service OAM^a: Supports CC, LB and LT. These functions comply with IEEE 802.1ag. Supports LM and 2DM. These functions comply with ITU-T Y.1731. Number of services that support Ethernet OAM (ETH OAM): 2K
	ETH OAM	Ethernet Port OAM^a: Supports OAM auto-discovery, remote loopback, fault detection, and link performance monitoring. These functions comply with IEEE 802.3ah. Number of ports that support ETH OAM: 2K NOTE: N2PEX1 boards do not support remote loopbacks.
	Distributed MPLS OAM/Centralized MPLS OAM NOTE: N1PEX1 boards support only distributed MPLS tunnel OAM.	MPLS tunnel OAM^a: Supports CV, FFD, BDI, FDI, Tunnel ping, and Tunnel traceroute. These functions comply with ITU-T Y.1711. Number of MPLS tunnels that support OAM: 2K
		MPLS PW OAM^a: Supports CV, FFD, BDI, FDI, PW traceroute, and PW ping. These functions comply with ITU-T Y.1711. Number of PWs that support MPLS PW OAM: 2K.
	MPLS-TP OAM NOTE: Only N2PEX1 boards support MPLS-TP OAM.	MPLS-TP tunnel OAM^a: Supports CC, RDI, AIS, LB, LT, LM, and 2DM. These functions comply with ITU-T G.8113.1. Number of tunnels that support MPLS-TP OAM: 2K
	MPLS-TP OAM NOTE: Only N2PEX1 boards support MPLS-TP OAM.	MPLS-TP PW OAM^a: Supports CC, RDI, AIS, LB, LT, LM, and 2DM. These functions comply with ITU-T G.8113.1. Number of PWs that support MPLS-TP OAM: 2K
	Loopback capability	PHY layer at Ethernet ports: N1PEX1: Supports inloops and outloops. N2PEX1: Not support loopbacks.
	Loopback capability	MAC layer at Ethernet ports: N1PEX1: Supports inloops. N2PEX1: Supports inloops and outloops.
	RMON	Supported
	Port Mirroring	Supports port mirroring (N2PEX1).
Inband DCN		Supported
LLDP		N2PEX1 Supported
HQoS		Supports service WRED policies, WFQ policies, PW polices, QinQ polices, V-UNI ingress policies, V-UNI egress policies, port policies, port shaping.
IGMP Snooping	Protocol enabling	Supported
	Port aging time	Supported
	Fast leave	Supported
	Discarding of unknown broadcast packets	Supported
	Static broadcast entry	Supported
Query of electronic labels		Supported
NOTE: a: MPLS tunnel OAM, MPLS PW OAM, MPLS-TP tunnel OAM, MPLS-TP PW OAM, and ETH OAM share OAM resources.

Technical Specifications of the PEX1

The technical specifications of the PEX1 include the parameters specified for optical interfaces, laser safety class, mechanical specifications, and power consumption.

Parameters Specified for Interfaces

Table 1 lists the parameters specified for the optical interfaces of the N1PEX1.

Table 1 Specifications of the ports of the N1PEX1

Port type	Description
10GBASE-LR(LAN)/10GBASE-LW(WAN)	10 km 10GE two-fiber bidirectional optical interfaces(XFP)
10GBASE-ER(LAN)/10GBASE-EW(WAN)	40 km 10GE two-fiber bidirectional optical interfaces
10GBASE-ZR(LAN)/10GBASE-ZW(WAN)	80 km 10GE two-fiber bidirectional optical interfaces

Table 2 lists the parameters specified for the optical interfaces of the N2PEX1.

Table 2 Specifications of the ports of the N2PEX1

Port type	Description
10GBASE-LR(LAN)	10km 10GE two-fiber bidirectional optical interfaces(XFP)
10GBASE-ER(LAN)	40km 10GE two-fiber bidirectional optical interfaces
10GBASE-ZR(LAN)	80km 10GE two-fiber bidirectional optical interfaces
70 km CWDM	70km 10GE CWDM optical interfaces
40 km DWDM	40km 10GE DWDM optical interfaces
80 km DWDM	80km 10GE DWDM optical interfaces

Laser Safety Class

The safety class of the laser on the board is Class 1. The maximum launched optical power of the optical interfaces is less than 10 dBm (10 mW).

Mechanical Specifications

The mechanical specifications of the N1PEX1 are as follows:

Dimensions (mm): 50.3 (W) x 235.2 (D) x 261.4 (H)
Weight (kg): 2.4

The mechanical specifications of the N2PEX1 are as follows:

Dimensions (mm): 25.4 (W) x 235.2 (D) x 261.4 (H)
Weight (kg): 1.4

Power Consumption

The maximum power consumption of the N1PEX1 at room temperature (25°C) is 107 W.

The maximum power consumption of the N2PEX1 at room temperature (25°C) is 48 W.

Delivery

Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.

Delivery Options	Estimated Delivery Time
DHL	3-5 business days
Fedex	3-5 business days
By Sea	10-20 business days

Notice:

Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:

Deliver to port:

Uonel is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Uonel will recommend trustworthy local freight forwarders to you.Uonel can facilitate the progress under buyer's permission and at buyer's expense.

Deliver to door:

Uonel will quote all destination charge prior once we have confirmed order.
Uonel is responsible for transporting goods to door after you have made the payment.

Warranty

100% Low Price Guarantee:
Uonel provides high-quality products at low wholesale prices

100% Quality Assurance:
All items are ORIGINAL NEW and GENUINE only.

Free Technical Support:

Our FREE Huawei Expert Consultancy Support is over the phone, by chat, by email or by login remotely.

100% Money Back Guarantee:
You can contact our customer service team to exchange or return any product that you bought from us.

Flexible Secure Payment & Shipment:
Verified authorization: Mcafee Secure, VeriSign Secured

Return Material Authorization (RMA) Process

Standard Hardware Warranty Policy:

Original new sealed Huawei product: 1 Year

The Support Contacts:

If your Huawei products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.

Company Profile

Uonel is one of the biggest Huawei Network Hardware distributor in china, founded in 2008. We are a global provider of netwotking products with more than 5000 customers.

We provide original new Huawei Routers,Switches,Firewalls,Wireless APs & controllers,OLTs,GPON modems,optical transceivers.Our company have more than $5million Huawei products in stock.

Most of our technical engineers had work exprience in Huawei company,we can provide network design&planning,configration,troubleshooting,maintenance and training service in world wide.