High Quality Middle Speed Paper Cup Paper Bowl Paper Lid Paper Cup
Handle Making/Forming Machine
Product Application
Paper cup forming machine is a fully automatic paper cup forming
machine, which can produce different sizes of paper cups with a
series of continuous process, including automatic paper feeding
through more than 2 times, paper anti-withdrawal device (to ensure
accurate positioning), ultrasonic welding, transferring paper fan
by magic hand, silicone oil lubricating, bottom punching, bottom
folding, bottom pre-heating, bottom knurling, cup discharging. The
machine, researched and developed by our company, is improved in
stability after comprehensive technical improvements.
Main Features
- Open cylindrical cam:Our factory is the first one using two cam
systems, this design more costly,but can let the top curling and
bottom knurling more accuracy, stable and low noise.Cam adpots high
strength Japan-SKD11 with quenching treatment,resistant to wear.
Before set up on the machine, our factory will test running one
week, to ensure each bearing at the suitable station.
- Gear drive:This system ensure the machine runs with high speed with
low noise, smoothly running and high precision. Instead of chain
drive.
- Hot air system and protect system: 2 set of hot air systems can
decrease the rate of leakage. Ourfactory using the whole set of
Leister hot air system with protection system. And our system sets
up onthe fixed plate, do not moving during production. Almost
impossible to damage.Also the only one have the protect system that
hot parts will go down, keep the distance with paper cup and cup
mould when the machine stop.
- Inspection system(Option): Unique design. Our factory set up on
final turn station,more stable than set up on flying tube. Do not
need to buy extra inspection machine, less factory space needed.
Inspection accuracy can be set up by self.
- Oil lubrication system: Adoptes forced lubrication system to ensure
main driving oil supply regularly and reduce friction and prolong
the machine life. The oil circuit adds a clear the oil and
filtering system to clean the oil automaticly. Our factory is the
first one to using double layer plate to avoid the scraps of paper
into the machine's inside.
- PLC control system: controlled by simple and efficient PLC system.
- Servo motor: Service for bottom paper feeding. The feature of runs
more stable and accuracy, reduce the waste of bottom paper. Servo
motor is made in Japan by MITSUBISHI.
- Bottom paper cutted mould: Unique design for bottom paper cutted as
a piece of paper, easy to pack.
- Paper fan side seal:Hot air system for preheating, using ultrasonic
for side seal. Ensure no water leakage during high speed running.
Especially for double PE coated paper fan, have two side hot air
system. Ultrasonic is made in Taiwan by EVEN GREEN.
- Photoelectric detection: each production step have camera. Any step
have problem will be showed on PLC. Such as the stock of paper fan
less than standard, will be alarming. If do not add paper fan, will
finish paper fan in machine firstly,then, stop the machine
automatically.
- Air controller: our factory also the one have air controller,and
the only one set up two air blowers on the machine. Less air
consumption required and avoid the cup fall off during production.
- Rubber tube: set up after the side sealing, when the cups finished
cup side sealing, can fix the cup posiion. And the fans are
foldable, when you change the paper fan thickness and adjustment,
it is easy to take the cups out.
Model | HT MC |
Speed | 60-80 pcs/min |
Cup size | Top Diameter: 60mm(min)-115mm(max) Bottom Diameter: 40mm(min)-85mm(max) Height: 50mm(min)-180mm(max) |
Raw material | 135-450 GRAM |
Configuration | ULTRASONIC & HOT AIR SYSTEM |
Output | 12KW,380V/220V,60HZ/50HZ |
Air compressor | 0.4 M³/Min 0.5MPA |
Net weight | 1.8 TONS |
Dimension of machine | 2500×1800 ×1700 MM |
Dimension of cup collector | 900 ×900 ×1760 MM |
Please do not hesitate to contact us for more details, we'll try
our best to serve and offer a good price to you!