|
[China]
Trade Verify
Address: NO.298th of ZHONGHUA NORTH STREET,SHIJIAZHUANG CITY,CHINA.
Contact name:Maple
HUATAO LOVER LTD |
|
Verified Suppliers
|
|
|
1. Paper Making Machine Parts Description:
Stainless Steel Cylinder Mould for paper making machine, including spindles, grids, spokes and spacers, with spokes equally spaced on the main shaft, with wire racks mounted on the spokes, stainless steel spokes mounted at equal intervals between the spokes on the main shaft, replacing part of the spokes The stainless steel support ring is embedded at the outer end of the support bar, and the grid is installed along the outer edge of the support steel ring and the spoke, and is tightly wound with stainless steel wire. The paper machine Cylinder Mould is light in weight, corrosion-resistant and reduces energy consumption. Reduce equipment maintenance cycle.
2.Paper Making Machine Parts Advantage of Stainless Steel Cylinder Mould :
1: High speed: Balance detection, more than 700 meters
2: Weight is reduced by 30% compared to ordinary cages, reducing
energy consumption
3: Each piece of spoke has been accurately measured to avoid the
overweight phenomenon of the cage and reduce the friction force of
the cage on the blanket and the net reduce manufacturing cost
4: All spokes are U-shaped design to reduce water resistance, the
surface is very smooth; the speed can be increased by 15-30 meters
compared to common cast iron cages without causing water drop
phenomenon
5: The strength is higher than that of the common cage for several
times, impact resistance, and the maintenance rate of the cage is
reduced
6: High surface roughness, increase the area of filtered water,
increase production, improve paper quality
7: Acid and alkali resistant, standard 304 stainless steel8: Very
strong integrity, durable.
3.Paper Making Machine Parts Material
| Main shaft | adopt 299mm×25mm seamless steel tube, 297×23mm after finished. When the pressure is ten tons, deflection is 0.00000000255m, which can be ignored. Shaft head structure is for 45# carbon steel |
| Spoke | Its material is cast iron. Quantity for inside and outside spoke is 19 pieces. It is with beautiful well-designed and smooth appearance, and without pulp attached. It is by natural aging treatment in order to keep the cylinder mould in shape. |
| Stainless Steel strip | size for the stainless steel of big outer circle is δ1.5×12mm. Inside spokes are inlaid and welded of δ3×25mm stainless steel strip. The stainless steel strip that welded on the outer circle of cylinder mould is parted off from the big steel sheet made in Tisco and Bao Steel. |
| Stainless Steel Bars | 10mm, 70 pcs. The steel adopted in the cylinder mould is all Stainless Steel 304 and it can provide laboratory test report for the material. |
4.Product pictures:
