Heavy Hammer Crusher product description
Heavy hammer crusher combines hammer
crushing and impact crushing in one machine, which is suitable for
coarse and medium crushing operation of materials below medium
hardness. This equipment reduces the number of hammer heads, so it
reduces the over-crushing rate of stone materials, improves the
throughput of stone materials, reduces the amount of stone powder,
and saves the cost of equipment wear and tear. It increases the
volume of hammer head and prolongs the wear resistance of hammer
head. Both ends of the heavy hammer crusher are equipped with
heavy-duty pulleys, which stabilizes the inertia when the equipment
is running and reduces the power consumption. And the
wear-resistant sheath is installed around the rotor disk, which is
easy to dismantle and install, so that the stone will not directly
wear the rotor disk, which greatly improves the use cycle of the
rotor.
Therefore, the heavy hammer crusher has
the characteristics of low energy consumption, low investment,
environmental protection, high efficiency, etc. It is suitable for
mining, building materials, highway, railroad, chemical industry
and other industries.
Heavy Hammer Crusher working principle
When working, open the electric control system, start the main
motor through the triangle belt belt motors within the rotor, heavy
feeder will be chunks of material into the crusher, chunks of
material into the crushing chamber by the hammer head impact,
larger than the gap between the shed bars of the ore by the
high-speed rotation of the hammer head strong blow, crushed or
thrown up the ore, thrown up the ore impact to the counterattack
lining plate or self-phase collision and crushed again, less than
the size of the grate slit from the lower part of the cavity
discharged.Heavy Hammer Crusher Technical Parameters
Model | Rotor size (mm) | Inlet size (mm) | Feed size (mm) | processing capability (t/h) | Motor power (Kw) |
PCZ1410 | 1400×1000 | 1020×750 | ≤500 | 180-230 | 90×2 |
PCZ1612 | 1600×1200 | 1150×1000 | ≤600 | 260-350 | 132×2 |
PCZ1614 | 1600×1400 | 1400×1000 | ≤600 | 380-550 | 200×2 |
PCZ1816 | 1800×1600 | 1640×1300 | ≤650 | 600-850 | 250×2 |
PCZ1820 | 1800×2000 | 1980×1300 | ≤650 | 700-1000 | 400×2 |
PCZ2020 | 2000×2000 | 1950×1600 | ≤800 | 900-1500 | 500×2 |
PCZ2225 | 2200×2500 | 2100×2300 | ≤1200 | 1500-3000 | 700×2 |