Wheeled Sand Washing Machine product description
Wheel sand washer is a kind of
high-efficiency sand washing equipment developed by our company
after accumulating many years of manufacturing experience, which is
composed of shell, washing wheel, reducer and electric motor. It
adopts unique sealing structure, fully enclosed oil bath
transmission device and adjustable overflow weir plate, which
ensures high washing degree and less sand loss, especially the
transmission part is isolated from water and sand, so the failure
rate of this sand washing machine will be greatly low. Moreover, it
has the characteristics of low energy consumption, large handling
capacity, saving water resources, no pollution and so on.
Therefore, it is the first choice of sand washing equipment for
river sand and mechanism sand industry in various regions.
1,Reasonable structure, convenient
maintenance, large handling capacity, low power consumption, high
washing degree.
2,Novel sealing structure, fully
enclosed oil bath transmission device.
3,Adjustable overflow weir plate ensures
high efficiency, durability, good cleaning and dewatering effect.
4,The fine grain product produced is
stable.
Wheeled Sand Washing Machine working principle
When the wheeled sand washer works, the motor drives the impeller
to rotate slowly through the triangle belt, reducer and gear, and
the sand enters into the washing tank from the feeding trough,
tumbles and grinds with each other under the driving of the
impeller, removing the impurities covering the surface of the sand
and gravel, and at the same time, destroying the water vapor layer
covering the sand particles, which is conducive to the dewatering;
and at the same time, water is added to form a strong water
current, which will take away the impurities and the small specific
gravity of the foreign matters in time and be discharged from the
overflowing mouth of the washing tank. At the same time, water is
added to form a strong current, which will take away the impurities
and small specific gravity foreign matter in time and discharge
them from the overflow washing tank. Clean gravel is taken away by
the blades, and finally the gravel is poured into the discharge
tank from the rotating impeller to complete the cleaning effect of
gravel.Wheeled Sand Washing Machine Technical Parameters
| Model | Bucket diameter
(mm) | RPM
(r/min) | processing capability
(t/h) | Motor power
(KW) |
| XS-2200 | 2200 | 1-2 | 20-50 | 5.5 |
| XS-2600 | 2600 | 1-2 | 30-65 | 7.5 |
| XS-3000 | 2900 | 0.8-1.5 | 50-100 | 11 |
| XS-3500 | 3500 | 0.8-1.2 | 80-200 | 15 |
