coal Gangue Crusher product description
The coal gangue crusher is suitable for fine crushing
operations of coal gangue materials with compressive strength less
than 240Mpa and moisture content less than 15%. It has the
characteristics of low maintenance costs, large crushing ratio,
reliable performance, less dust, and low noise.
The coal gangue crusher is equipped with three
crushing rollers. According to the crushing particle size required
by the user, the combination of welding roller surface and flat
roller surface can be freely selected for the three roller
surfaces.
The coal gangue crusher is suitable for fine crushing
operations with feed particle size less than 90mm and finished
product particle size requirements of 0.2-10mm. In the absence of
electricity, this equipment can be powered by diesel and gasoline
engines.
coal Gangue Crusher working principle
The coal gangue crusher uses three high-strength
wear-resistant alloy crushing rollers to crush coal gangue
materials, which generate high extrusion pressure due to relative
rotation. After entering the crushing chamber of the upper two
rollers, the coal gangue materials are compressed by the relative
rotation of the two rollers. After the first squeezing and grinding
(coarse crushing) of the coal gangue materials, the materials
immediately enter the lower two rollers (the middle roller is a
shared roller) that rotate relatively, and the extrusion pressure
of the lower two rollers is used for secondary squeezing and
grinding (fine crushing), Crush the coal gangue into the required
particle size and discharge it from the discharge port.coal Gangue Crusher Technical Parameters
number | Specification | Feed size (mm) | Output granularity tunable(mm) | production capacity (t/h) | Motor power Kw | Protection mode | transmission method |
1 | 4PG-40CT | <120 | 2-20 | 6-50 | 26-37 | sprung | Triangle Strip or coupling |
2 | 4PG-50CT | <200 | 2-20 | 8-90 | 37-75 |
3 | 4PG-60CT | <200 | 2-30 | 15-130 | 60-90 |
4 | 4PG-80CT(Y) | <200 | 2-30 | 20-250 | 75-110 | Spring and Hydraulic |
5 | 4PG-100CT(Y) | <200 | 2-30 | 30-380 | 90-160 |
6 | 4PG-120CT(Y) | <500 | 2-30 | 40-480 | 110-190 |
7 | 4PG-150CT(Y) | <700 | 2-30 | 65-640 | 150-220 |
8 | 4PG-220CT(Y) | <700 | 2-30 | 80-800 | 190-250 |
9 | 4PG-350CT(Y) | <700 | 2-30 | 100-1000 | 220-300 |