Plastic Waste Shredder product description
In the harmless treatment of hazardous waste and
industrial solid waste, crushing treatment must be carried out to
reduce volume, facilitate treatment and combustion. Therefore, our
company has developed and designed a shredding equipment based on
years of accumulated experience in shredder manufacturing and
advanced foreign technology. It mainly consists of the main body,
high alloy drive, fixed tooth cutter, main shaft, bearings and
bearing seats, hydraulic motor, hydraulic system, and shock
absorber.
This solid waste shredder adopts high-quality alloy
toothed blades, which have strong wear resistance and toughness;
Adopting split bearing seats for easy maintenance and replacement
of gear cutters; The use of advanced hydraulic systems can ensure
strong torque and stable operation even in harsh situations;
Adopting advanced PLC detection control system, equipped with
automatic start stop reverse and overload reverse control
functions. Therefore, this solid waste shredder has the
characteristics of low energy consumption, large processing
capacity, high torque, low noise, and low maintenance cost.
Suitable for shredding large and thick materials with toxic,
explosive, flammable, and corrosive hazardous waste.
Widely used in the field of harmless treatment of
hazardous waste and industrial solid waste, as well as industrial
sludge waste treatment; Tire crushing field; Waste incineration
field; Pharmaceutical and chemical industry; In the field of
biomass energy.
Plastic Waste Shredder working principle
When the plastic shredder is working, the electronic
control system is turned on, and the hydraulic motor drives two
shredding toothed roller rotors. The two shredding toothed roller
rotors rotate relative to each other, forming a V-shaped shredding
toothed cavity. The shear force generated is used to crush the
material. After the material enters the gap between the two toothed
rollers (V-shaped crushing cavity), it is subjected to the shear
force of the relative rotation of the two toothed rollers, tearing
and shearing the incoming material to the required particle size
and discharged from the discharge port.Plastic Waste Shredder Technical Parameters
| number | Model | tearing chamber
(mm) | Toothed Knife Diameter
(mm) | Number of teeth and knives
(PCS) | Motor power
(Kw) |
| 1 | 2PGS-10 | 600×360 | φ200 | 30 | 15-22 |
| 2 | 2PGS-15 | 600×460 | φ300 | 20 | 30-44 |
| 3 | 2PGS-30 | 1200×460 | φ300 | 30 | 74-90 |
| 4 | 2PGS-20 | 600×740 | φ430 | 15 | 44-60 |
| 5 | 2PGS-40 | 1200×740 | φ430 | 30 | 90-110 |
| 6 | 2PGS-25 | 800×920 | φ550 | 20 | 60-90 |
| 7 | 2PGS-50 | 1200×920 | φ550 | 30 | 90-110 |
| 8 | 2PGS-30 | 1200×1006 | φ650 | 30 | 110-150 |
| 9 | 2PGS-80 | 1800×1006 | φ650 | 35 | 150-180 |
| 10 | 2PGS-60 | 1200×1510 | φ800 | 30 | 150-220 |
| 11 | 2PGS-100 | 2400×1510 | φ800 | 60 | 180-264 |
