|
[China]
Trade Verify
Address: Group 4, Chuling Village, Chaohua Town, Zhengzhou, Henan, China
Contact name:Liu
Henan Hongtai Kiln Refractory Co.,Ltd. |
|
Verified Suppliers
|
|
High Refractoriness 2000 Furnace Cement Refractory Mortar mix 3000 Degree For Kiln Furnace Masonry
Introduction to Refractory mortar
Refractory mortar consists of refractory powder, binder and admixture. Almost all refractory raw materials can be made into powders used to prepare refractory mortar. The ordinary refractory mortar made by adding refractory clinker powder and an appropriate amount of plastic clay as a binder and plasticizer is called ordinary refractory mortar, which has low strength at room temperature, and high strength is formed by ceramic bonding at high temperatures. The chemically bonded refractory mortar, which uses hydraulic, air-hardened or thermosetting bonding materials as the bonding agent, is hardened by a certain chemical reaction before it is lower than the ceramic bonding temperature.
The particle size of refractory mortar varies according to the requirements of use, and its limit particle size is generally less than 1mm, and some are less than 0.5mm or finer.
The material of refractory mortar should be considered consistent with the material of refractory products of masonry. In addition to being used as a jointing material, refractory mortar can also be used as a protective coating for the lining by painting or spraying.
Characteristics and applications of refractory mortar:
1. Good plasticity and convenient construction;
2. High bonding strength and strong corrosion resistance;
3. High refractoriness, up to 1650℃±50℃;
4. Good resistance to slag invasion;
5. Good heat peeling performance. Refractory mortar is mainly used in coke ovens, glass furnaces, blast furnace hot blast furnaces, and other industrial furnaces.
| Product Name | MgO(%) | Al2O3(%) | Cr2O3(%) | Cold Rupture Bonding Strength | Refractoriness (℃) ≥ | Binding Time (min) | Binder | |
| 110℃*24h | 1400℃*3h | |||||||
Magnesia-Chrome mortar | 78-85 | / | 3-5 | / | 2.0 | 1800 | 1-3 | Sodium Silicate |
| Special Magnesia-Chrome mortar | 90 | / | 1-3 | / | 4.0 | 1800 | 1-3 | Sodium Silicate |
| Magnesia mortar | 85-90 | / | / | / | 3.0 | 1800 | 1-3 | Sodium Silicate |
| Spinel mortar | 80-85 | 4-8 | / | / | 4.0 | 1800 | 1-3 | Sodium Silicate |
| High alumina mortar | / | 60-75 | / | 1.0 | 4.0 | 1790 | 1-3 | water |
| Spalling resistant high alumina mortar | / | 75 | / | 1.0 | 5.0 | 1790 | 1-3 | water |
| Phosphate Bonded mortar | / | 70 | / | 1.0 | 5.0 | 1790 | 1-3 | Phosphoric Acid |
| P901 high strength mortar | / | 75 | / | 1.5 | 6.0 | 1790 | 2-3 | Phosphoric Acid |
| Alkali Resistant mortar | / | 30-35 | / | 1.0 | 3.0 | 1690 | 1-3 | water |
| Alkali Resistant Insulating mortar | / | 30-40 | / | 1.0 | 1.5 | 1690 | 1-3 | water |
| Recommended Dosage | 3-5% of gross weight of the brick | |||||||
Application industry of refractory mortar
Refractory mortar is widely used in metallurgy, building materials, machinery, petrochemicals, glass, boilers, electric power, steel, cement, etc.
Classification of refractory mortar
1. Refractory mortar is classified by refractoriness
Usually divided into ordinary refractories (1580~1770℃), advanced refractories (1770~2000℃) and special refractories (above 2000℃) according to the degree of refractoriness; according to chemical characteristics, they are divided into acid refractories, neutral refractories and Alkaline refractories. In addition, there are refractory materials for special occasions.
2. Refractory mortar is classified according to its composition material
According to different materials, it can be divided into clay refractory mortar, high alumina refractory mortar, siliceous refractory mortar, magnesia refractory mortar and so on.
3. Refractory mortar is classified by binder:
(1) Ceramic bonded refractory mortar is a mixture composed of refractory fine aggregate and ceramic bond (plastic clay). The delivery state is dry, it needs to be used after adding water, and it is hardened by ceramic bonding at high temperature.
(2) Hydraulically bonded refractory mortar is a mixture composed of refractory fine aggregate and hydraulic binder (cement) which plays a major role in bonding. The delivery state is only in dry form. It can be used after adding water. No heating is required when hardening.
(3) Chemically bonded refractory mortar is a mixture composed of refractory fine aggregate and chemical bond (inorganic, organic-inorganic, organic). The delivery state can be either paste or dry, hardening below the ceramic bonding temperature. According to the hardening temperature, this refractory mortar can be divided into two types: air hardening and thermosetting. Air-hardening refractory mortar is usually formulated with air-hardening binders such as water glass. Thermosetting refractory mortar is usually formulated with thermosetting binders such as phosphoric acid or phosphate. After this kind of thermosetting refractory mortar is hardened, in addition to having high strength at various temperatures, it also has the characteristics of small shrinkage, tight joints, and strong corrosion resistance.
There are two types of refractory mortar: finished products and semi-finished products. The so-called finished refractory mortar means that the raw material and clinker have been prepared by the manufacturer in proportion, and only need to add water according to the standard and stir evenly when used on site; semi-finished or non-finished refractory mortar is raw material and clinker that are not blended together. When used on site, mix thoroughly according to the composition of different muds, and add water according to the regulations and stir evenly.
Packing of refractory mortar
1.on wooden pallets with jumbo bag
2.Load weight of each pallet: 1.5-2.0 tons,
Shipping of refractory mortar
1.Our packaging is as per customer’s request
2.Normal goods delivered by sea transport
3.Sample shipping by express
4.We will shipping and delivery goods timely, quanlity and quantity
guaranteed, and also in accordance with the contract and customer's
requirment completely.
1. Strong professional:
Our company has thirty years producing experience in refractory
products. Our manager will supervise on a various refractorys
production materials, process control, quality supervision and
package delivery, and ensure the products are 100% qualified.
2.Annual supply:
Our company has passed ISO9001 quality management system
certification and SGS certification. And the annual supply of
shaped and unshaped refractory product is 28, 800-35, 000 tons.
3. Export experiences:
Now we have gained a global sales network reaching Taiwan, Russia,
Vietnam, Pakistan, Bulgaria, French, India, Congo, Angola, South
Africa, and so on.
4. Production equipment:
Production and testing equipments are new, complete and automated
or semi- automated. Such modern facilities and equipments have
provided the fine technical guarantee for the production and
testing.
5. Testing equipment:
Our company's testing equipments as follows:
High Temperature RUL Tester
Bulk Density Tester
The Pressure Tester
Refractoriness Tester
Certificates
