|
[China]
Trade Verify
Address: Group 4, Chuling Village, Chaohua Town, Zhengzhou, Henan, China
Contact name:Liu
Henan Hongtai Kiln Refractory Co.,Ltd. |
|
Verified Suppliers
|
|
92% 95% Alumina Ceramic Wear Lining Bricks/Ceramic Liners For Ball Mill
High alumina lining ceramic brick and tile is of high wear
resistance, acid and alkli resistance, effectively prolong the
service life of equipment and considered to be the best choice of
anti-wearing and anti-corrosion material; Wear resistance of
ceramic is 266 times than that of special manganese, 171.5 times to
high chrome cast iron; Hardness is much higher than that of
wear-resistant steel and stainless steel.
This product are featured by high density and hardness, low wear
lost, corrosion-resistance etc. They are the perfect high-efficient
grinding media for milling glaze/frit, pigment, ceramic materials,
and various mine ore powder, they are using ceramics, cements,
paints, refractories, inorganic mineral powders etc...
92% 95% Alumina Ceramic Wear Lining Bricks/Ceramic Liners For Ball Mill
Features of ceramic brick
1.Good wear-resistant,Corrosion resistant
2.Heat-resistance
3.The service life can be at least five years, which is 15% more
efficient than a rubber liner.
4.Decreases the pollution to the grinding material and increases
the capacity of mill ball, lowing the cost.
Advantages of ceramic brick
1) Great Hardness
Have a Rockwell hardness of up to 90 which is well above that of
wear-resistant steel and stainless steel.
2) Excellent wear resistance
Its wear-resistance is equivalent to 266 times that of manganese
steel and 171.5 times that of high chromium cast iron. Under the
same working conditions, the service life of pipes lined with high
alumina ceramics can be prolonged at least 10 times.
3) Corrosion resistance
Its extremely high stability of molecular structure ensures its
resistance to corrosion from various acid and alkali mediums.
4) Light weight
Its density is 3.6 g/cm3, only half of steel, making installation
more convenient.
92% 95% Alumina Ceramic Wear Lining Bricks/Ceramic Liners For Ball Mill
| 1. Alumina ceramic lining plate (Thinkness less than 25mm) | ||||
| Performance Index | 92 Series | 95 Series | 97 Series | 99 Series |
| AL2O3 (%) | >92 | >95 | >97 | >99 |
| Moh's Hardness | 9 | 9 | 9 | 9 |
| Moisture Content (%) | <0.02 | <0.02 | <0.02 | <0.02 |
| Fracture Toughness (n/mm) | 40 | 42 | 44 | 48 |
| Bending Strength (Mpa) | 255 | 275 | 285 | 300 |
| Bulk Density (g/cm3) | >3.63 | >3.68 | >3.73 | >3.83 |
| Item | Length (mm) | Width (mm) | Height (mm) | Remarks |
| 10*10 | 10 | 10 | 3--10 | |
| 17.5*17.5 | 17.5 | 17.5 | 4--10 | |
| 23.7*23.7 | 23.7 | 23.7 | 5--15 | Wear-risisting Plain Brick |
| 50*25 | 50 | 25 | 5--10 | Wear-risisting Plain Brick |
| 50*50 | 50 | 50 | 5--15 | Wear-risisting Plain Brick |
| 100*100 | 100 | 100 | 6.5--15 | Wear-risisting Plain Brick |
| 120*80 | 120 | 80 | 6--20 | Wear-risisting Plain Brick |
| 150*60 | 150 | 60 | 10--25 | Wear-risisting Plain Brick |
| 150*100 | 150 | 100 | 6--25 | Wear-risisting Plain Brick |
| 150*100 | 150 | 100 | 12--50 | Wear-risisting Plain Brick |
| 2. Alumina ceramic bricks (Thinkness more than 40mm) | ||||
| Performance Index | 75 Series | 92 Series | 95 Series | 97 Series |
| AL2O3 (%) | >75 | >92 | >95 | >97 |
| FE2O3 (%) | <0.6 | <0.3 | <0.2 | <0.1 |
| Moh's Hardness | 7.5 | 8 | 9 | 9 |
| Moisture Content (%) | <0.02 | <0.02 | <0.02 | <0.02 |
| Bulk Density (g/cm3) | >3 | >3.63 | >3.68 | >3.73 |
| Wearing Loss (%) | <0.2 | <0.1 | <0.1 | <0.1 |
| Item | Length (mm) | Width (mm) | Height (mm) | |
| End flat brick | 150 | 50 | 40/50/60/70/77/90 | |
| Circle brick | 150 | 50/ 45 | 40/50/60/70/77/90 | |
| Half end flat brick | 75 | 50 | 40/50/60/70/77/90 | |
| Half circle brick | 75 | 50/ 45 | 40/50/60/70/77/90 | |
| Flake brick | 150 | 25/ 22.5 | 40/50/60/70/77/90 | |
| 3. Special alumina ceramic brick for plate | ||||
| Item | Length (mm) | Width 1 (mm) | Height (mm) | |
| 80*50*55 | 55 | 50 | 80 | |
| 110 | 75 | 45/ 41 | 110 | |
| 110 | 37.5 | 45/41 | 110 | |
92% 95% Alumina Ceramic Wear Lining Bricks/Ceramic Liners For Ball Mill
Application of ceramic brick
·Ceramics, mines and other grinding equipment lining
·Material thansfer equipment,
·inside and outside surface of powder separating equipment on iron
and steel works
·Thermal and power plants
·Coals and cements industries,etc.
According to different customers' needs, raw materials of the products are strictly controlled in order to ensure that the products not only takes on good wear-resistant, corrosin-resistant, but also rich sizes. The service life can be extended at least five years, which is 15% more efficient than a ruber liner. Also, it prevents pollution to the grinded material and increases the capacity of mill ball, resulting in cost cut.
92% 95% Alumina Ceramic Wear Lining Bricks/Ceramic Liners For Ball Mill
Wear Resistant High Alumina Lining Brick are dispatched in strong
carton with seperate paper card as buffering, palletised and
shrink-wrapped for better conservation,being prepared for their
immediate delivery.
Normally the standard package is 15-25KG/carton, 1-1.5tons/pallet,
20-25tons for 20'container
92% 95% Alumina Ceramic Wear Lining Bricks/Ceramic Liners For Ball Mill
1.Our strong team provide you reliable service that make you feel
purchasing is more easier
2. We ensure that we can supply capability with competitive price.
3. Work strictly to guarantee product quality,
4. Highest standard of integrity. Guarantee customer's benefit.
1.I want get some sample for test.
We are glad to provide the sample for test before the order.
2.I'd like to know more about the product.
The product specification data sheet and other you want will give
you asap.
3.I want to know the shipment date.
Usually it within 7-10 days from payment received.
4.About the payment.
We accept T/T,L/C at sight.
5.I don't know the specific size I need.
Please tell us your application,and we will suggest you the most
right one.
Garnet abrasive After-sales Service
1.Our products passed ISO9001 standard, and we control the testing
procedure strictly.
2. From the raw materials adopting to the transport to port, our
staffs do their works seriously
and responsibly.
3.If there are quantity problems, package problems, delivery
problems,or any other problems,
our company will try best to solve customer's problems.
