Payment Term Customizable Options for Top- Silica Bricks in Glass Furnace Industry

 The silicon brick is used more in the glass furnace, the main component is silicon dioxide (SiO2).The silica brick used in glass melting furnace requires the SiO2 content above 94%, the highest service temperature is about 1600~1650℃, and the density is 1.8~1.95g/cm3.Apparent porosity is required to be less than 22%, the higher the porosity, the worse the quality of silicon brick.Appearance is mostly white crystalline silica brick, micro component for scale quartz crystal, because want to happen when silica brick in high temperature crystallization of transformation, volume expansion, especially during 180 ~ 270 ℃ and 573 ℃, crystal transformation is more intense, so in the process of roasting kiln and cold repair to be adapted to the crystal transformation of silica brick and take appropriate measures such as elastic brace and so on.Silica brick masonry should have expansion joints.
Silicate bricks work at about 200 ° C warmer than clay bricks, but have less erosive resistance to liquid glass and alkaline fly material, and are therefore used for masonry structures such as large crown, breastwork and small hearths.High silicon refractory mud or silica brick powder and other materials close to the composition of silica brick should be used as cementing materials during masonry.

In the preparation of silica brick mud material, a certain amount of waste silica brick is usually added to the mixture, which aims to reduce the expansion and stress produced during the burning of the products, reduce the generation of cracks, and improve the yield.The amount added depends on the shape and weight of the brick.For weight less than 25kg special-shaped brick can be added 20%;More than 25kg special-shaped brick can be added 30%;For special shaped silicon brick can be added 30%.When adding waste silicon brick, attention should be paid to this problem, adding too much will reduce the refractoriness and mechanical strength of the product, increase the porosity.Therefore, the amount of waste brick should not be too much.
Binding agent of choice in the manufacture of silicon bricks
Binding agents used in the manufacture of silicon bricks include sulphite pulp waste liquor and lime milk.Limestone milk acts as a plasticizer when used as a binder.The lime milk increases the strength of the brick during drying and becomes a mineralizer during firing, promoting the transformation of quartz.
Lime should contain a large amount of active CaO, not more than 5% of undecomposed CaCO3 and MgCO3, and more than 5% of Al2O3+Fe2O3+SO2F.When there are large particles of underburned CA-CO3 and overburned lime, the product will produce melting holes, which will affect the quality of the product.
The addition amount of lime should be converted into CaO, which varies according to different products and usually fluctuates between 1.5 ~ 2.5%.For example, in the production of coke oven silica brick, the CaO content is 2.0 ~ 3.0%;In the production of electric furnace top silica brick, the CaO added amount is 1.4 ~ 1.75%.

The batching characteristics of silicon brick
Adopt high quality silica with impurity content less than 0.5%, and wash with tap water before mixing to ensure the quality of early stage.The sintering temperature can be reduced by 20℃ when fast converting quartz is mixed with slow converting quartz.When the critical particle size is reduced from 3mm to 2mm during the mixing process, the interface energy of the material can be increased and the quartz transformation can be promoted.
In addition, the selection of new mineralizers is also very important to improve the quality of products.At present, most producers in the ingredients to add mineralizers are still lime milk and iron scales.In order to improve the softening temperature under load, the amount of FeO added has been reduced from 2.5% to less than 1%.If the use of feldspar minerals containing alkali metals or composite mineralizers can receive better results.
The feeding sequence of silica brick mud
All kinds of silica powder and waste silica brick powder were added into the wet mill at a certain ratio, and then dry mixed for 2 ~ 3min, followed by the mixture of sulphite pulp waste liquid, lime milk and iron oxide powder, and then mixed for 8 ~ 17min according to the requirements of the molding method.
The mixing time depends on the weight of the roller, the number of revolutions, the amount of raw materials, the hardness of raw materials, the composition of the particles and the molding method.Special-shaped bricks and handmade mud require longer mixing time than mechanical mud.Mixing time of different mud materials should be determined by experiment.
The moisture content of the mud material for manufacturing silicon brick is generally 5 ~ 9%, the moisture content of the mud material for manual molding is 7 ~ 9%, and the moisture content of the mud material for mechanical molding is 5 ~ 6%.

The requirements of siliceous raw materials for the production of silicon bricks are generally considered from the following perspectives.
(1) the purity
In the production of silicon bricks, the content of SiO2 and Al2O3 should be no less than 96% and 1.2% ~ 1.6% respectively.The total content of alkali metal oxides should not exceed 0.2% ~ 0.4%, and the impurity content in silica should not exceed 0.5% for high-quality silicon bricks.
(2) density
The general requirements of dense silica, because of the loose texture, the product porosity is high.
(3) Speed of transformation
Since the conversion rate of silica directly affects the brick-making process, it is necessary to know the conversion situation before use.
In general, when evaluating the quality of silica raw materials and determining the process conditions, comprehensive analysis should be made according to the performance characteristics of specific raw materials, and targeted process conditions should be worked out.
In the application of siliceous materials, the following problems should be paid attention to:
1, Before using siliceous raw materials, it is necessary to master the comprehensive performance characteristics of the raw materials.
2, In the process of use, the raw materials should go through strict picking and washing.Because the Al2O3 in the raw materials of silica is mostly from the clay attachment on the surface of silica, in order to reduce the content of Al2O3 in the products, the raw materials must go through strict selection and washing.
(3) There are also certain requirements for the lumpiness of silica. The smaller the lumpiness, the more impurities will be introduced.

Packaging

1. 1 ton bags in container, 25 MT/20'FCL.
2. 25kg bags in container, 25 MT/20'FCL
3. 25kg bags in ton bags, then in container, 25 MT/20'FCL
4. as the customer' request

Packaging of SK37 High Alumina Refractory Brick

1.on wooden pallets with plastic cover: wooden pallet size :930*930 or 1000*1000mm,
2.Load weight of each pallet: 1.5-2.0 tons,

Shipping of SK37 High Alumina Refractory Brick

1.Our packaging is as per customer’s request
2.Normal goods delivered by sea transport
3.Sample shipping by express
4.We will shipping and delivery goods timely, quality and quantity guaranteed, and also in accordance with the contract and customer's requirement completely.

Delivery:

15-30 days working day for large quantity. The shipment we will arrange as soon as possible. Of course, if it is a custom products, the shipping time will delay.
Sample:

Usually by EMS, DHL, UPS, TNT, FedEx. Anyway you like. Bulk order: Usually by sea.

Payment:

It can be through T/T, L/C at sight. The specific terms determined according to the quantity of the goods, etc.
Your inquiry related to our product & price will be replied within 24 hours.
Export:
Our products have been exported to many countries: Australia, Chile, USA, Russia, UK, Indonesia, etc., good quality have be approved by our clients.

1.Timely response, 

Timely response to your inquiry, multiple choice recommendations based on your demand,quickly respond mails and provide solutions. 

2.Free sample of dry ramming mass

Sample and trial order are accepted for the quality evaluation

3.Strict quality control

Arrange production on time and control quality strictly. 

4.Shorter delivery time.

Book the earliest vessel or plane to guarantee the delivery time. 

5.Professional Services

Provide all the detailed news and pictures from order to delivery;offer relative export documents and original certificate if needed;warm and considerable after-sale service. 

Henan hongtai kiln refractory co., LTD. : "quality first, reputation first, customer first: it is our aim."Scientific management, strong technical force, perfect testing means, advanced technological equipment and stable product quality are the guarantee of quality service.Henan hongtai kiln refractories co., LTD sincerely hopes to cooperate with you hand in hand and in good faith.
Henan hongtai kiln refractory co., LTD. Main products are high alumina brick, clay brick, fused zirconium corundum brick, fireproof ball lightweight insulation brick, wear-resistant pouring material, corundum pouring material, low cement high strength pouring material, impermeable material, self-flowing material, plastic material, and various types of refractory materials.For different industries, the cement industry with anti-flaking high-alumina bricks, alkali resistant bricks, phosphate bricks;Boiler industry USES all kinds of brand wear-resisting brick, corundum brick, mullite brick and other finalizing materials.The company insists on "product quality is the life, enterprise integrity is the foundation", in the fierce market competition, won many users' trust and praise.The products are sold all over the country, as far as Vietnam, India, Korea, Pakistan, kazakhstan, other southeast Asian countries and regions.