|
[China]
Trade Verify
Address: East Industry Park,Danbei Town,Danyang City,Jiangsu Province,China
Contact name:Kevin Jiang
DANYANG RIGHTOOLS CO.,LTD |
|
Verified Suppliers
|
|
|
T.C.T Hole Cutter for Stainless Steel
| Features: |
| 1. Can cut materials up to 5mm thick. |
| 2. The cutting length is 12mm. |
| 3. Tungsten Carbide Tipped cutting edges |
| 4. The slug is spring ejected when cutting is finished. |
| 5. Cutting Depth Limitation |
| 6. Can be used on portable and pillar drilling machines. |
| 7.Other size we can customize according to your requirements |
| Applications: |
| Stainless steel plate |
| F.R.P. |
| Copper plate |
| Iron plate |
| Brass plate |
| Aluminum plate |
| Alloy steel plate |
| Electrical controller box |
| Channel iron |
Size:
| Art No. | Diameter | Art No. | Diameter |
| RTTHS1601 | 15 | RTTHS1616 | 30 |
| RTTHS1602 | 16 | RTTHS1617 | 32 |
| RTTHS1603 | 17 | RTTHS1618 | 35 |
| RTTHS1604 | 18 | RTTHS1619 | 36 |
| RTTHS1605 | 19 | RTTHS1620 | 38 |
| RTTHS1606 | 20 | RTTHS1621 | 40 |
| RTTHS1607 | 21 | RTTHS1622 | 42 |
| RTTHS1608 | 22 | RTTHS1623 | 45 |
| RTTHS1609 | 23 | RTTHS1624 | 48 |
| RTTHS1610 | 24 | RTTHS1625 | 50 |
| RTTHS1611 | 25 | RTTHS1626 | 51 |
| RTTHS1612 | 26 | RTTHS1627 | 52 |
| RTTHS1613 | 27 | RTTHS1628 | 53 |
| RTTHS1614 | 28 | RTTHS1629 | 55 |
| RTTHS1615 | 29 | RTTHS1630 | 60 |
| R.P.M TABLE | |||
| DIA(MM) | STEEL PLATE | STAINLESS | CAST IRON |
| 14-19 | 1190-800 | 1000-500 | 1790-1390 |
| 20-30 | 1160-710 | 890-440 | 1590-1240 |
| 31-40 | 960-640 | 800-400 | 1430-1110 |
| 41-50 | 870-570 | 720-360 | 1300-1010 |
| 51-60 | 760-510 | 640-320 | 1140-890 |
| 61-70 | 640-430 | 530-270 | 950-740 |
| 71-80 | 550-360 | 460-230 | 810-630 |
| 81-90 | 480-320 | 400-200 | 710-550 |
| 91-100 | 430-280 | 350-170 | 630-490 |
| 101-120 | 380-260 | 320-160 | 570-440 |
| 121-150 | 200-100 | 120-60 | 390-280 |
| OPERATING INSTRUCITONS | |
| ·Insert the hole saw into the electric drill. | |
| ·Secure the drill chuck jaws on three flats of hole saw shank. | |
| ·Begin drilling using light feed pressure until the hole saw has begun drilling. | |
| ·Apply medium feed pressure once the cutter has engaged in material. | |
| ·Do not press the hole saw strongly into the material after the pilot drill has penetrated,as this may damage the carbide tips. | |
| ·Always use rotation hand drills with no impact or with a rotation only mode. |
Package and Delivery:
1. Package:Plastic box,Blister card,etc
2. 20-30days after your deposite
3. We can provide samples for free to test before order.
Payment:
1. We can accept L/C,T/T,Western Union,Paypal,etc.
2. 20-30%T/T in advance,the balance before shipment or against copy of B/L.
