LB-CY5000 Cartridge Filter Industrial dust collector for laser cutting in the metal fabriaction workshop

Application :Welding/Laser cutting/plasma cutting/Grinding/Polsing/Milling or other Metal Fabrication and other dry dust collection and filtration.

**LB-CY Multi Cartridge Filters dust collector, all-in-one compect dust collection equipment with fan system with the machine

LB-CY dust collector is a large model for dust collecting in heavy duty conditions. It is of small size, high efficiency, utility, obvious effect for energy-saving, easy to maintain and other advantages. It is used widely in mechanic industry, casting, welding, construction material, light industry, metallurgy, chemical industry and etc.

Facility principle:

Dust-laden air goes into dust collector from the top or the side import, the dust is "closured" by cartridge appearance and gathers together. The purified air is discharged out from the cartridge center, which achieve the purification purpose. In order to clean the cartridge, making use of compressed air (0.6-0.7Mpa) to produce a strong air current, which release into the cartridge center through the electromagnetic valve, and oscillate and blow down the dust accumulated on the external surface of cartridge as the vibration waves. The dust fall down in the ash bucket in the following. In order to ensure the cartridge works normally and continuously, dynamic change dust, the PLC control system blow conversely.

Technical Parameters:

Other type industrial dust collectors:

LB-PC Multiple Cartridge Dust Collector, Stationary type with high efficiency

LB-PC multi-cartridge dust removal equipment is a kind of efficient and energy conservation equipment, which is modularized and systematic produced combining with advanced technology power accoording to our conclusion of design and practical experience . It is widely used for dust purification in mechanical processing, chemical, construction, materials, pharmaceutical, electronics, wood processing industry, etc.

Facility principle:

Dust-laden air goes into dust collector from the top or the side import, the dust is "closured" by cartridge appearance and gathers together. The purified air is discharged out from the cartridge center, which achieve the purification purpose. In order to clean the cartridge, making use of compressed air (0.6-0.7Mpa) to produce a strong air current, which release into the cartridge center through the electromagnetic valve, and oscillate and blow down the dust accumulated on the external surface of cartridge as the vibration waves. The dust fall down in the ash bucket in the following. In order to ensure the cartridge works normally and continuously, dynamic change dust, the PLC control system blow conversely.

Features:

• small volume, small footprint, saving space;

• high efficiency of cleaning; Purification rate is more than 99% on the particles bigger than sub-micron.

• using imported cartridge of the United States as main part with a long service life;

• reasonable structure, easy for maintenance, low-cost; convenient for cartridge replacement without any tools;

• Energy-saving, running resistance is 500-800pa, initial resistance is 200pa,and the maximum resistance is 1500pa.( according to the air pressure of fan)

• inported PLC control adjustable pulse blowing conversely, equipped with import pressure indicator;
• Series horizontal cartridge, a single seal to ensure the safety of equipment operation and easy for maintenance;

• flexible box composite element can be installed to meet different site conditions;

• a variety of cartridge material can be choiced for users, including high temperature resistant, anti-moisture, flame retardant and so on.

The Technical parameters:

LB-C Type Multiple Cartridge Dust Collectors:

*Function characteristics:

1)Low emission concentration, can the filter the dust smaller than 0.2 um.

2)Good permeability, low gas resistance.

3)Soot is convenient, automatic dust clean; Ensure the continuity of production and efficiency.

4)Dust collection container is convenient to disassemble, compact connection with filter funnel, dust does not leak.

5)Filter cylinder surface is smooth, good waterproof and oil proof performance.

LB-GD high Vacuum welding Dust Collector

Application Place:

High vacuum model dust collector mainly applied to purification dry, no oil, no corrosion of the smoke gas during welding, cutting and grinding process, can connect with the Robot arm for the operation condition of the robot welding.

Technical Parameter:

Product Advantage:

This kind of filter with low noise high negative pressure fan, not only with low noise,but also produce quite high negative pressure. Can connect to multiple station convulsions dust removal at the same time.

The equipment adopts the integrated design, compact structure; cover a small area l, and electric control system use PLC for automatic control, easy to operation. The high pressure dust removal system adopts imported and heat-resistant, wear-resistant high pressure composite suction hose, its inner surface smooth wind resistance losses small.

According to the different work station requirements, its methods of catching dust can be used in a high pressure suction mask, universal environmental protection welding torch, grinding wheel.

We,Qingdao Loobo Environmental Protection Technology Co.,Ltd is aimed to air purifying and kinds of removing fume exhausted, with its own R&D team more than ten years manufacturer, located in Qingdao city of china, specialized in the main products:

1,portable fume extractor, welding smoke purifiers, soldering fume extraction units, laser cutting smoke filters

2.downdraft benches(grinding dust removal worktable),

3.central fume purification projects,

4.Spare parts:flexible suction arm,etc.

All of our products with the ISO9001, and CE certification for parts of products, the quality can be guaranteed.

ATTN: Miss Molly Huang