Active Member
|
[China]
Address: 广州市黄埔区大沙地东路403号B802房(仅限办公）
Contact name:Echo
Guangzhou Changfeng Steel Co., LTD |
|
|
DIN 1.2080 Cold Work Hot Rolled Alloy Steel Plate Thickness 10-200mm
Cr12 / D3 / 1.2080 Forged Special Alloy Steelsteel belongs to high carbon high chromium ledeburite steel, is widely used cold work die steel. The steel has good hardenability, abrasion resistance, hot workability.
► Chemical Composition(%):
| C | Si | Mn | Cr | Mo | Ni | Cu | P | S |
| 2.0-2.3 | 0.15-0.35 | 0.15-0.45 | 11.5-13.0 | 0.15-0.25 | 0.40-0.70 | ≤0.030 | ≤0.035 | ≤0.035 |
► Similaer grades: DIN 1.2080 / AISI D3 / JIS SKD1 / GB Cr12
► Avaible shape:
Steel Plate
Round Bar
Steel Block
Flat Bar
Steel sheet
► Recommend heat treatment:
| Quenching | Tempering | ||||
| Heating temperature/℃ | Cooling way | Hardness (HRC) | Tempering temperature /ºC | Cooling way | Hardness (HRC) |
| 950-980 | Oil Cooling | 60-63 | 180-220 | Air Cooling | 60 |
| 400 | Air Cooling | 54-58 | |||
► Available size(mm):
| Flat Bar Size(mm) | Round bar Size(mm) | |||
| Thickness | Width | Length | Diameter | Length |
| 10-700 | 155-2200 | 3000-6000 | 10-300 | 3000-6000 |
► Feature:
| 1. | Vacuum degassing refining treatment of steel purity. |
| 2. | Spherification annealing and softening treatment, the cutting processing performance is good. |
| 3. | Reinforced vanadium, special addition of molybdenum, excellent wear resistance. |
► Application:
| 1. | The thickness is not greater than 2MM thin sheet, high efficiency falling mold, punching die and embossing die. |
| 2. | Various scissors, inlaid blades, woodworking blades. |
| 3. | Thread rolling die and wear resistant slider. |
| 4. | Cold heading mould, thermosetting resin forming die. |
| 5. | Stretch molding mold and cold extrusion die. |
► Delivery condition:
EF or ESR, hot rolled or forged, black surface or milling.
Hardness: annealed, HB217-269
Speical Alloy Forged Steel is widely used in cold making die steel, with high strength, better hardenability and good wear resistance, but the impact toughness is poor.It is mainly used for the low impact load, which requires high wear-resisting cold punching die and punch, cold cutting scissors, drill sleeve, gauge, drawing die, embossing die, thread rolling, drawing die and thread rolling mould.
The steel has good hardenability, abrasion resistance, hot workability. Carbide distribution in the steel is good, can be used to make complex shape, heavy working conditions of all kinds of cold work mould. Such as cold die punch, thread rolling dies, wire drawing die, die, powder metallurgy die, woodworking cutting tools, cold cutting scissors drill tool and gauge set.
Corner of factory:
