Guangzhou Changfeng Steel Co., LTD |
|
NAK80 P21 Special Steel For Plastic Mould Steel
NAK80 P21 Alloy tool Steel For Plastic die Steel with thickness 16-200MM
NAK80 is a pre-hardened plastic mold steel.Factory hardness can
reach HRC37-43.
Have a good polishing performance and carving, good electrical
discharge.
Chemical Composition(%)
C | Si | Mn | P | S | Ni | Mo | Cu | Al |
0.10-0.18 | ≤0.35 | 1.70-2.0 | ≤0.030 | ≤0.030 | 2.90-3.40 | 0.20-0.50 | 0.80-1.20 | 0.70-1.10 |
Features:
1. No heat treatment, excellent optical polishing, machinability,
good erosion
2. Vacuum degassing refining steel pure.
3. Spheroidized annealing softening treatment, good cutting
performance.
4. Strengthen the elements of vanadium, molybdenum special
addition, wear resistance is extremely excellent.
Applications:
1) Deep drawing die, cold extrusion die.
2) Thread rolling and wear resistant sliders.
3) Cold heading die, thermosetting resin molding die.
4) All kinds of scissors, mosaic blade, woodworking blade.
5) Thickness of not more than 2MM thin sheet, efficient blanking
mold, punching die and impression die.
Terms of payment:
30% deposit T/T and the balance by L/C at sight, or T/T
Delivery condition:
For abundant stock, 15-20 days.For customized products, 30-50 days.
Our service:
Warehous
Processing
Strict Quality Control