Guangzhou Changfeng Steel Co., LTD |
|
Prehardned (HRC28-32) Hot Rolled Special Tool Steel 1.2311 P20
1. Product Description
1.2311/P20 Mould Steel is a versatile, low-alloy tool steel that is
characterized by good toughness at moderate strength levels.
1.2311 Mould steel is commonly used for plastic injection mold
cavities and tooling and for die casting dies for zinc.
P20 is typically sold in the pre-hardened condition at hardness of
approximately 300 HBW.
Characteristics as following:
1, Good hardenability
2, Good integral machanical performance under high temperature
3, Good heat-resistance and fatigue-resistance
4, Good performance against liquid metal erosion
5, High putity and homogeneous structure of China's biggest ESR
production base for its strict requirement in the whole process of
exploitation,smelting,vacuum
degassing,ESR,forging,annealing,inspection
2.Available size
Round | Diameter | Length | |
20mm-500mm | 2000mm-5800mm | ||
Steel plate | Thickness | Width | Length |
12-460mm | >=155mm | 1600-2200mm |
3.Chemical analysis Chemical composition(for reference only)
C | Si | Cr | Mn | Mo | P | S |
0.28-0.40 | 0.20-0.80 | 1.40-2.00 | 0.60-1.00 | 0.30-0.55 | ≤0.03 | ≤0.03 |
4.Compared grades(based on usage)
Chinese | American | German | Swedish | Japanese |
GB | AISI | DIN | ASSAB | JIS |
3Cr2Mo | P20 | 1.2311 | 618 | PDS-3 |
5.Delivery Condition
1.Hot rolled, black,
2.Hardness:HRC=28--33,
3.Annealed Hardness:HBS<=235.
6.Application
1.2311 P20 3Cr2Mo plastic mould steel is ideally suited for the
production of plastic moulds. Typical applications include die
holders, zinc die casting dies, backers, bolsters and injection
moulds. The versatility of P20 plastic mould steel with its high
tensile characteristics enables uses for a variety of other
applications such as shafts, rails and wear strips
Good mechanincal property, make surface have equal hardness after
deal with it, Nice polishing , for some mini.Roughness on the
surface which can be dealed with induration in advance.It can be
used directly after the mould machined, deal with surface
induration necessity.
1.2311 P20 3Cr2Mo is a pre-hardened high tensile tool steel which
offers ready machineability in the hardened and tempered condition,
therefore does not always require further heat treatment .This
eliminates the risks, cost, and waiting time of heat treatment and
avoids the associated possibility of distortion or even
cracking.Subsequent 1.2311 component modifications can easily be
carried out.
7.Delivery date
Abundant stock, 7-15 days.
Customized products, 30-50 days.
Product Photo
Strict Quality Control
Loading Photo