Guangzhou Shijing Digital Technology Co.,Ltd |
|
50cm*25m 27 yards PST Green textil htv pu flex heat transfer vinyl roll pvc vinyl for t-shirt clothing
Application Instruction
1.Choose your desired design , you must flip your design before
cutting
2.Reverse the pattern and cut it onto the vinyl sheet with a craft
cutter.
Craft Cutter Setting:
-Cricut:
Blade: Standard; Setting: Iron-On
-Silhouette Cameo:
Blade: 3; Speed: 8;Force: 4 ;Passes: 2; Material: Smooth
-Brother:
Blade: 1; Cut Speed: 1;Cut Pressure: 1
*Settings may vary based on blade condition and age of machine.
3. Weed out the excess
4. Heat and Transfer
Place the sheet with your design on to your shirt and place the
teflon sheet on the top of your design.
Home Iron:
-Please Heat the iron on medium setting (302°F– 320°F);
-Press each section of the design with medium/firm pressure for
10-15 seconds;
Heat Press:
-Preheat garment for 2-3 seconds;
-Apply design at 305℉;
-Use medium pressure for 10-15 seconds;
5.Cool Peel
Peeling the clear pet film after the vinyl turns cold, just in
15-30 seconds later for the vinyl to cool down.
*If any part of the iron on vinyl lifts off, repeat the steps above
until you can peel off the clear backing without lifting up the
vinyl.
Warm Tips
1.Make sure there are no wrinkles on the material.
2.If you are having trouble, try turning the shirt 90 degrees and
pressing again, this should eliminate problems from cold spots.
3.If you've already ruined one shirt, keep using it to experiment.
Cut small pieces of heat transfer and try raising or lowering your
temperature, or pressing longer or for less time.
4. Please wait for at least 24 hours to wash your design.