East Sun New Material Technology (Shenzhen) Co., Ltd. |
Verified Suppliers
|
|
Textile Printing 30cm 60cm Heat Transfer Roll Pet Dtf Film for Tshirt Printing
Dtf Pet Film Product Description
Dtf Pet Film is also called color inkjet film, digital printing
film and so on. The water-based colored ink and white ink are
directly printed on the printing film through the printer to form
various beautiful patterns, which are dried by sprinkling hot melt
adhesive powder and then transferred to the ironing object.
Printable transfer film typically consists of three layers:
Base Layer: The base layer is a carrier sheet or film that provides stability and support during the printing and transfer process. It holds the design or image during printing and acts as a temporary carrier for transferring the design onto the target surface.
Adhesive Layer: The adhesive layer is a thin coating applied to the surface of the transfer film. It is designed to adhere to the target surface when heat and pressure are applied during the transfer process. The adhesive layer helps to ensure that the design remains intact and firmly bonded to the substrate.
Release Layer: The release layer is a coating or treatment on the opposite side of the adhesive layer. It allows for easy release of the transfer film from the printed design after the transfer process is complete. The release layer prevents the film from sticking to the printed design during storage or handling.
Dtf Pet Film Product Specification:
Product | Conventional Thickness | 0.075mm |
| Conventional Length | 100m |
| Conventional Width | 600mm |
| Finished Product | 0.075mm*600mm*100m/roll |
Washing Resistance | Washable Temperature | 45℃-60℃ |
Storage Conditions & Shelf Life | It is strictly forbidden to collide with sharp objects. When opening the package and not using it, please seal it and store it to prevent moisture and high temperature | |
| The storage conditions are temperature -5℃-30℃, humidity 40-80%, avoid direct sunlight, shelf life is one year |
Dtf Pet Film Operating Conditions
Operating Conditions | Heat Press Temperature | 150℃-160℃ |
| Heat Press Time | 8-15 seconds |
| Pressure | 0.3-0.5mpa |
Cautions:
1. Tear-off method: cool tear or hot tear.
2. The printing film is a soft product. A slight stickiness on the
surface is normal, and the surfaces should be prevented from
sticking to each other.
3. Reasonably control the temperature and pressing time. If the
temperature is too high or the time is too long, it will easily
cause discoloration or decrease in elasticity
FAQ
1.Do you accept OEM or ODM?
Yes ,we accept OEM and ODM, we are professional heat transfer
material manufacturer ,having more than 10years experience. able to
assist you R&D new products. So if you need bonding some
special materials, please don't hesitate to let us know.
2.How do you transport the products?
If you are not urgent, we usually transport by ship because it is
the cheapest way. But for the West Asia area, we deliver by
train because there is no sea to ship. And for samples and urgent
cargo, we transport it by air as it is the fastest way .Of
course if you have other better idea about transport, we will
accept it.
3. May I have your samples?
If you need some sample for reference, please let us know your
fully address/ship mode with courier ,and we will arrange sample
for your reference.
4. How long is the lead time?
Sample lead time:3-7 days Bulk lead time:7-10 days(depends on order
quantity)
5. How do I pay for my order?
We accept T/T , Paypal