|
[China]
Trade Verify
Address: Tunsing Industrial Zone, No. 28 Xiatian village, Longtian street, Pingshan District, Shenzhen City, Guangdong Province, China
Contact name:Abby Zou
Shenzhen Tunsing Plastic Products Co., Ltd. |
|
Verified Suppliers
|
|
|
0.12mm thick polyester hot melt adhesive film roll manufacturers for bonding fabric to veneer , veneer to MDF
Model: DS0012TS
PES Hot Melt Adhesive Film Description:
This product is a thermoplastic adhesive, suitable for a variety of uses on a wide range of materials. It performs an excellent adhesion for textile, polyester, cotton, blended fabric, PVC etc. This adhesive exhibit excellent wash and dry cleaning resistance.
PES Hot Melt Adhesive Film Application:
DS0012TS development direction and application is on garment accessories, footwear, handbags, luggage, embroidery, crafts of adhesive.
PES Hot Melt Adhesive Film Physical Characteristics:
Composition | Co-polyester |
Color | Milk white translucent |
Density | 1.15±0.02g/cm3 |
Melt Flow Index | 20±5g/10min; Condition:ASTMD1238-04 |
Rhegology | 110°C -120°C |
Operating Temperature | 140°C -170°C |
Release Liner | Glassine release paper |
MOQ | A roll or two rolls in a carton if in stock. |
Conventional Thickness*Width*Length/Roll | 0.08mm*50cm*100yards |
| 0.10mm*50cm*100yards |
| 0.12mm*50cm*100yards |
| 0.15mm*50cm*100yards |
| 0.08mm*100cm*100yards |
| 0.10mm*100cm*100yards |
| 0.12mm*100cm*100yards |
| 0.15mm*100cm*100yards |
PES Hot Melt Adhesive Film Recommended Bonding Conditions:
Flat Press | Second Flat Press |
Machine Setting: 120℃-140℃ | Machine Setting: 140℃-170℃ |
Dwell Time: 5-15 seconds | Dwell Time: 8-25seconds |
Pressure: 0.3-0.6mpa | Pressure: 0.3-0.6mpa |
Product Image:
Application (bonding fabric to veneer, veneer to MDF, fabric to PVC, patch, embroidery, garment, etc.):
FAQ:
1 . How about hot melt adhesive film?
A: It is just a film, and the basic material is release paper. But the film is solid in room temperature, when reach its melt point,it is able to bond other materials, Different materials of hot melt adhesive film have different performances and different usages, we need understand your demands,then recommend you right products to you.
2. Do you accept OEM or ODM?
Yes ,we accept OEM and ODM,we are professional heat transfer material manufacturer ,having more than 10years experience.able to assist you R&D new products. So if you need bonding some special materials, please don’t hesitate to let us konw.
3. How do you transport the products?
If you are not urgent, we usually transport by ship because it is the cheapest way. But for the West Asia area, we deliver by train because there is no sea to ship. And for samples and urgent cargo, we transport it by air as it is the fastest way.Of course if you have other better idea about transport, we will accept it.
4. May I have your samples?
If you need some sample for reference,please let us know your fully address/ship mode with courier,and we will arrange sample for your reference.
5. How long is the lead time?
Sample lead time:3-7 days
Bulk lead time:7-10 days(depends on order quantity)
6. How do I pay for my order?
We accept L/C ,T/T ,Western Union , PayPal.
