|
[China]
Trade Verify
Address: zhenglu town, tianning district, changzhou city, JIangsu Province
Contact name:Lillian
Jiangsu Shengman Drying Equipment Engineering Co., Ltd |
|
Verified Suppliers
|
|
|
Nozzle Jet Atomization spray dryer In Pharmaceutical Product PRICE For Milk Medicine Powder
1, Feed system
It is composed of screw pump and feed pipe and valve.
The screw pump adopts frequency conversion speed regulation to
effectively control the feed quantity. The main part of the
pipeline valve is SUS304 stainless steel, and it is clean and
sanitary
2 , Medium circulation system
It is composed of blower, draft fan, muffler, air regulating
butterfly valve and wind pipe
Draft fan and blower are high quality manufacturers supply,
cooperation for many years, quality is stable; the blower for
SUS304 stainless steel, to ensure clean air; fan with a silencer,
effectively reduce the noise. The system volume, wind pressure,
wind speed, is the key, based on years of experience, is now
mature.
3, Air heating and cleaning system
It consists of early, medium and high temperature HEPA filters,
fans, steam radiators, electric heaters, etc.
The heat source is a steam radiator and an electric heater. The
material is made of stainless steel pipes and stainless steel fins.
The utility model not only ensures the cleanness of the air inlet
system, but also has high thermal efficiency and can guarantee the
output heat
4, Drying tower system
It is composed of a dry main tower, a hot air distributor, an
atomizer, an observation manhole, a tower lighting device, a
pneumatic hammer, a lower bin, a cylinder body and a cone jacket,
and a cooling system
This system is the core system
1, combined with the test experience, we in the design process of
the main tower of the main tower: adjust the straight cylinder
height to diameter ratio, adjusted by 0.9:1 routine to about 1.1:1;
prolong the retention time of the material, the drying effect is
ensured. The adjustment of the taper cone tower, consists of a
conventional 60 degree angle adjustment to 54 degrees, fully
considering the smooth material in the cone when feeding.
2, the atomizer atomizer using frequency converter to adjust the
speed to achieve the best effect. The base will reduce the
atomizing atomizer, the atomizing disk atomizer and increase the
distance, the droplets in the air can not be returned under the
spinning top, in order to ensure the normal operation of the
system.
3, design a set of Taneiduo lighting devices and 1 doors, manholes.
4, hot air vortex shell tower by accelerating structure, the hot
air in the tower when pressed material effectively, orderly and
swirl decreased. Hot air distributor with the characteristics and
requirements of the technology, do both sides distributor the wind
guiding mechanism, and can adjust the angle, in order to control
the hot air into the tower when the tangential angle.
5, the main tower design of jacket cooling cooling system: to avoid
the main tower body wall temperature is too high and the receiving
effect of the adsorption tower in the cone wall material by high
temperature and coking softening phenomenon, ensure the quality of
the materials.
5, Product collection system
The utility model is composed of a cyclone separator and a water
film dust collector
6, Cold desiccant charging system
It is composed of air filter, freezing dehumidifier, cleaning pipe
and so on. The system sends the fresh air to the clean area and
collects the cooling air after the filtered fresh air passes
through the refrigeration dehumidifier
7, Other auxiliary system
Are well-known manufacturers of supply, reliable performance; some
pipes take into account a certain angle design, the use of
suppression stainless steel pipe, to avoid the end material,
blocking material, and local resistance is too large, affecting the
phenomenon of material delivery
(1) Fast drying: liquid or wet raw material after atomization, significantly increased surface area, in the hot air flow, instantaneous evaporation can be 95% ~98% moisture, to complete the drying time only a few seconds, and especially suitable for drying of thermal sensitive material.
(2) Excellent drying effect: Finished products with good uniformity, fluidity and solubility, the product high purity, good quality.
(3) Production process is simple, convenient operation and control. For material which moisture content 40-60% (special material even moisture contents 90%) of the liquid to a dry powder products, dried without crushing and screening, and product purity. Product size, density and moisture can be adjusted( within a certain range) by changing the operating conditions.
Technical parameters
| Model | PLG | |||||
| 5 | 25 | 50 | 100 | 150 | 200-2000 | |
| inlet temperatyre ℃ | 140-350 automatically controlled | |||||
| outlet temperatyre ℃ | 80-90 | |||||
| Max water evaporation capacity kg/h | 5 | 25 | 50 | 100 | 150 | 200-2000 |
| centrifugal spraying nozzle transmission mode | compressed air transmission | mechaical transmission | ||||
| rotation speed (r.p.m) | 25000 | 18000 | 18000 | 18000 | 15000 | 8000-15000 |
| spraying desc diameter (mm) | 50 | 100 | 120 | 140 | 150 | 180-340 |
| max electric heating power (kw) | 9 | 36 | 63 | 81 | 99 | settled by customer |
| overall dimensions | 1.8*0.93*2.2 | 3*2.7*4.26 | 3.7*3.2*5.1 | 4.6*4.2*6 | 5.5*4.5*7 | depends on tryer |
| dried powder collection | ≥95 | ≥95 | ≥95 | ≥95 | ≥95 | ≥95 |
Applications
Centrifugal spray dryer is the most widely used process in liquid shaping technology. Can be used for:
Chemical industry: sodium fluoride (potassium), basic dyes and pigments, dye intermediates, compound fertilizers, formaldehyde silicic acid, catalysts, sulfuric acid, amino acids, white carbon black, etc.
Plastic resin: AB, ABS emulsion, urinary formaldehyde resin, phenolic resin, dense rubber (urea) formaldehyde resin, polyethylene, polyvinyl chloride, etc.
Food industry: fat-rich milk powder, gluten, cocoa milk powder, milk substitutes, blood hunting powder, egg white (yellow), etc.
Food and plants: oats, chicken juice, coffee, instant tea, flavored meat, protein, soybean, peanut protein, hydrolysate, etc.
Sugars: corn syrup, corn starch, glucose, pectin, maltose, potassium sorbate, etc.
Ceramics: alumina, ceramic tile materials, magnesium oxide, talcum powder, etc.
FAQ
Q: How can I visit your factory?
A: Our company is in Changzhou city, and it is very near Shanghai
city. It takes about 1 hour to get to Changchou. Or we can even
visit you in Shnghai.
Q: What’s the quality of your products?
A: Our products come with best quality, and passed CE
certification. And exported to lots countries around the world,
such as Australia, Malaysia, Vietnam, Philippines, Korea, Brazil,
Argentina, Russia, South Africa, etc. You can rest assured with the
quality absolutely.
Q: What to do if the machine has a problem?
A: 24 hours timely response of mail and phone calls. If the parts
broken belong to non-artificial factors within 12 months, we offer
free replacement. If beyond 12 months, customers should bear the
freight back and forth and accessories cost.
Q: How long is the warranty of your equipment?
A: One year.
Q: What is your payment term?
A: Our usual payment term is: 30% TT in advance, 70% TT before
shipment. Other ways can also be received after we both sides
discussion and agreement.
Q: Does your price include freight?
A: Our usual price is based on FOB Shanghai. If you request CIF,
please give us your delivery port, and we will give you CIF price.
