Active Member
|
[China]
Address: 4F,Building 7,Optical Valley International Headquarters Industrial Park,No.62,Optical Valley Road,Wuhan,China
Contact name:
Wuhan Huaying Electric Power Tech & Science Co., Ltd |
|
|
High Voltage Power Cable Fault Locator Cable Fault Locating Equipment Fast Speed
Product name
Cable Fault Locator HYCF
Introduction
The cable-fault detector is a testing device of good integrity. It
can test on the High Resistance Flashover Fault,
Grounding High and Low Resistance Fault, Short & Off
Circuit on the Cable Fault and Poor contact and etc. If being
equipped with sounding method and locating instrument, it can
exactly detect the fault point. Furthermore, it especially applies
to test for
various power cable and communication cable.
Cable Fault Locator HYCF has two test modes as below:
Features
High Voltage Power Cable Fault Locator
1. Multi functional, safe, fast speed and accurate. It uses LV
impulse method and HV flashover method to test, can test kinds of
fault of the cable, if equipped with sound locator, can accurately
the position of the fault point.
2. High precision, adopts high-speed sampling technique, A/D
sampling speed is 100MHz, resolution is 1m, detection blind area is
1m.
3. High degree of intelligence, test results auto displayed by LCD.
4. Can store and review the waveform and parameters, these
information will not loss after power off.
5. Dual display, compare the measured waveform and normal waveform
of the fault cable, benefit to further detection of the fault.
6. With function of wave form expansion ratio, change the
proportion of the waveform, expand the waveform to test.
7. Directly display the direct distance or relative distance
between fault point and measured point.
8. Can modify the speed according different measured cable.
9. Portable design , small in volume , with rechargeable battery,
easy to carry and operate.
Technical index
| The longest testing distance | 32KM (100KM for the open-wire line) |
| Testing dead zone | 1M |
| Resolution of reading | 1M |
| Power dissipation | 5VA |
| Service condition | Environment temperature 0℃~+40℃ Terminal temperature -10℃~+50℃ Relative humility 90%RH |
| Dimension | 225×165×125mm3 |
| Weight | 2kg |
