|
[China]
Trade Verify
Address: No.5001,Dongji Building B, No.1 Dongji Avenue, Jiangning, Nanjing, China
Contact name:Mike Huang
High Wood Technology Development Co., Ltd |
|
Verified Suppliers
|
|
|
HW-CMM Connectoc, HW-222C60M11,MTL-55302F,2mm Pitch.
NICOMATIC specializes in the design,development and manufacture of electronic connectors.
The CMM MICRO CONNECTOR interconnection system is a 2mm pitch connector (square matrix) witch proven high reliability under the most extreme environmental conditions:
- Flexible architecture: “Board to Board”, “Board to Wire”and “Wire to Wire”configuration
- Modular and hybrid design:mixed layout full option with Low Frequency - LF(over 5 Amp)-and High Frequency-
HF-(over 11 GHz)and High Power -HP-(over 30 Amp)
- High reliability contact design&High performance under harsh use conditions
- Secure:integral jacking mechanism or locking by spring latch
How to order.
CMM SERIES 220 Male & Female | LF contacts number | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | |
Distance between axis | A | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | |
| B | 9 | 11 | 13 | 15 | 17 | 19 | 21 | 23 | 25 | 27 | ||
| Length in mm | C | 14 | 16 | 18 | 20 | 22 | 24 | 26 | 28 | 30 | 32 | |
LF contacts reference mark number | D | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |
| E | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | ||
| F | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | ||
| G | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | ||
| 24 | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 40 | 56 | 58 | 60 |
| 22 | 24 | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 54 | 56 | 58 |
| 29 | 31 | 33 | 35 | 37 | 39 | 41 | 43 | 45 | 61 | 63 | 65 |
| 34 | 36 | 38 | 40 | 42 | 44 | 46 | 48 | 50 | 66 | 68 | 70 |
| 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 28 | 29 | 30 |
| 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 29 | 30 | 31 |
| 24 | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 40 | 56 | 58 | 60 |
| 42 | 44 | 46 | 48 | 50 | 52 | 54 |
| 40 | 42 | 44 | 46 | 48 | 50 | 52 |
| 47 | 49 | 51 | 53 | 55 | 57 | 59 |
| 52 | 54 | 56 | 58 | 60 | 62 | 64 |
| 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| 21 | 22 | 23 | 24 | 25 | 26 | 27 |
| 22 | 23 | 24 | 25 | 26 | 27 | 28 |
| 42 | 44 | 46 | 48 | 50 | 52 | 54 |
CMM RANGE
| USE
| |||||||||||||
STRAIGHT ON PCB
| 90° ON PCB
| STRAIGHT SMT
| 90° SMT
| CRIMP
| ||||||||||
| 1000/200 | Male
| Y L=3,0 | YL L=4,5 | YM L=5,1 | YX L=9,1 | V L=3,0 | VL L=4,5 | T L=2,25 | T L=3,35 | R L=0,9 | C Gauge 22 | S Gauge 24-28 | ||
Female
| Y L=3,0 | YL L=4,5 | YC L=1,2 | PF Press fit | V L=3,0 | VL L=4,5 | T L=2,25 | T L=3,35 | R L=0,9 | C Gauge 22 | S Gauge 24-28 | |||
220
| Male
| Y L=3,0 | YL L=4,5 | YM L=5,1 | YX L=9,1 | V L=3,0 | VL L=4,5 | T L=2,25 | T L=3,35 | R L=0,9 | C Gauge 22 | S Gauge 24-28 | ||
Female
| Y L=3,0 | YL L=4,5 | YC L=1,2 | PF Press fit | V L=3,0 | VL L=4,5 | T L=2,25 | T L=3,35 | R L=0,9 | C Gauge 22 | S Gauge 24-28 | |||
| 320 | Male
| Y L=3,0 | YL L=4,5 | YM L=5,1 | YX L=9,1 | V L=3,0 | VL L=4,5 | C Gauge 22 | S Gauge 24-28 | |||||
Female
| Y L=3,0 | YL L=4,5 | PF Press fit | V L=3,0 | VL L=4,5 | C Gauge 22 | S Gauge 24-28 | |||||||
| 340 | Male
| Y L=3,0 | YL L=4,5 | YM L=5,1 | YX L=9,1 | V L=3,0 | VL L=4,5 | C Gauge 22 | S Gauge 24-28 | |||||
Female
| Y L=3,0 | YL L=4,5 | PF Press fit | V L=3,0 | VL L=4,5 | C Gauge 22 | S Gauge 24-28 | |||||||
Product showing.
| Materials and coating | |
| Insulating medium | Glass fiber reinforced PPS, UL94-V0 Radiation resistant, non hygroscopic, ozone resistant |
| Contact | Copper alloy nickel base plating |
| Enclosure | stainless steel |
| Electrical performance index | |
| Voltage withstand test (sea level) | 800V AC/DC |
| Insulation resistance | ≥1000MΩ |
| Rated current | LF contact: working current 25 C, ≤ 3A; Working current 85 C, ≤ 2.2A; contact resistance ≤10mΩ |
| Mechanical performance index | |
| Mechanical life | 500 times of plugging and unplugging |
| Environmental performance index | |
| Operating ambient temperature | -60℃ to 260℃ |
1. The contacts are distributed, and it is recommended to crimp the AWG22 wire for LF contacts;
2. After LF contact is pressed into the base with special tools, it is recommended to use the heat shrinkable sleeve shrinks its tail and fills the base cavity with glue;
