0.8mm-3.6mm Rod Annealing Machine High Durability DC Three - Section Annealing

HXE-TH350 Annealer for rod breakdown machine

I. Quick details

    TH350 Annealer for rod breakdown machine is used to annealing wire from 0.8mm to 3.6mm.

II. Main technical parameter

1. Usage single bare copper wire annealing

2. Applicable wire diameter 0.8mm-3.6mm, Speed 1000m/min (Adjustable)

3. Annealing method DC. Three-section annealing

4. Annealing current DC4000A

5. Annealing voltage DC60V

6. Steam quantity 18kg/h

7. Cooling water capacity 650L/min

8. Compressed air capacity 0.4-0.6Mpa, 50L/min

9. Power source Customize

10. Direction Customize

11. Cooling method Water

12. Protection by Steam

13. Driving by AC 5.5kw-6 Motor, Chinese classical brand WN.

14. Inverter control, 5.5kw, Classical Brand Inovance

III. Advantage and after-sale service

A: Advantage

(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.

(2). Body and other key components and parts are produced by our own factory , quality is reliable.

(3). Our company’s developing process in more than 10 years.

(4). DC. three-section annealing

B: After-sale service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(1) 1 year for mechanical part.

(2) 6 month for electrical part.

Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.

A. Due to wrong operation while shipping.

B. Due to Buyer`s wrong preparation that may cause damage to the machine.

C. Due to Buyer`s wrong operation that may cause damage to the machine.

D. Not in the consuming part list.

E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.

F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.

G. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.

IV. Shipping & Installation

Shipping

There are two lifting rings on the drawing machine, four on then annealing machine.

Installation (See attached drawing)

According to the drawing, make the foundation.

When machine is in position, install bolts and adjust the center line.

When concrete is drying, adjust center line again and fix the bolts.

Adjust

Before adjusting, check and clean all parts.