Max Speed 25m/s Auto Dual Spooler With Control System Traverse Motor Power 90W

HXE-SX630 Auto Dual Spooler with control system

I. Quick details

     SX630 Auto dual spooler with control system is used to take up wire from 1.7mm-4.2mm.

II. Main technical parameter

1. Applicable wire diameter 1.7mm-4.2mm

2. Max speed 25m/s

3. Max loading capacity 500kg

4. Max length for wire storage 17m

5. Spooler motor power 15kw*2sets (WN motor, China classic brand)

6. Traverse motor power 90w

7. Glide base motor power 0.75kw

8. Control system Dual inverters control system (Inovance brand, China classic brand)

9. Brake Disc brake

10. Wire capture coefficient ≥95%

11. Compressed air capacity 0.4-0.6Mpa, 50L/min

12. Dimension (L*W*H) 3350*3000*2200mm

13. Weight 5300kg

III. Working environment

Altitude less than 1000m.

Temperature: －10℃－40℃

Relative temperature less than 85% (25℃)

Power source 380V, 50Hz, can be customized

IV. Advantage and after-sale service

A: Advantage

(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.

(2). Body and other key components and parts are produced by our own factory , quality is reliable.

(3). Our company’s developing process in more than 10 years.

B: After-sale service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(1) 1 year for mechanical part.

(2) 6 month for electrical part.

Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.

A. Due to wrong operation while shipping.

B. Due to Buyer`s wrong preparation that may cause damage to the machine.

C. Due to Buyer`s wrong operation that may cause damage to the machine.

D. Not in the consuming part list.

E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.

F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.

G. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.

V. Shipping & Installation

Shipping

There are two lifting rings on the drawing machine, four on then annealing machine.

Installation (See attached drawing)

According to the drawing, make the foundation.

When machine is in position, install bolts and adjust the center line.

When concrete is drying, adjust center line again and fix the bolts.

Adjust

Before adjusting, check and clean all parts.