|
[China]
Trade Verify
Address: No.1406, Building 3, Calxon Fortune Center, Financial 3rd Street, Jingkai District, Wuxi, P. R. of China
Contact name:Anna qian
Wuxi High Mountain Hi-tech Development Co.,Ltd |
|
Verified Suppliers
|
|
|
4 Inch 6 Inch 8 Inch 24 Inch HDPE Water Supply Drainage Pipe Specifications List
----------------------------------------
Basic Info.
Hot-melt connection refers to the use of polyethylene pipes and
pipe fittings that can be connected by hot-melting, and the
strength of the connection can exceed the body strength of the
pipes and fittings. This connection is possible with pipes of
polyolefin material, with outstanding advantages.
1. Butt-type hot melt connection
The butt-type hot-melt connection method is generally used for
pipes with a diameter of 63MM or more.
The butt-type hot-melt connection is to heat two pipes or a pipe
and a butt-type HDPE pipe fitting with a butt machine through a
heating plate, and then butt-weld as a whole, and it can be fixed
after cooling. Before welding, make sure that two HDPE water supply
pipes or one pipe and HDPE butt fittings are kept in a straight
line, and the pipe section should be flat.
2. Socket type hot melt connection
The socket-type hot melt connection is suitable for pipes and
fittings with relatively small diameters (generally below DN63mm),
because the pipes and fittings with small diameters have thin walls
and small cross-sections, and it is difficult to ensure quality by
using butt joints.
The socket-type hot-melt heat capacity connection of HDPE pipe uses
a small hot-melt device to heat the pipe end and the
socket-and-socket pipe at the same time. After melting, insert the
HDPE pipe into the pipe fitting, press the two parts that need to
be connected, and keep it cool. It can be fixed.
| Size | PN2.0MPa | PN1.6MPa | PN1.25MPa | PN1.0MPa | PN0.8MPa | PN0.6MPa | |
| SDR 9 | SDR 11 | SDR 13.6 | SDR 17 | SDR 21 | SDR 26 | ||
| OD(inch) | OD(mm) | thickness | thickness | thickness | thickness | thickness | thickness |
| 1/2 | 20 | 2.3 | 2.3 | ||||
| 3/4 | 25 | 3 | 2.3 | 2.3 | |||
| 1 | 32 | 3.6 | 3 | 2.4 | |||
| 1 1/4 | 40 | 4.5 | 3.7 | 3 | 2.4 | ||
| 1 1/2 | 50 | 5.6 | 4.6 | 3.7 | 3 | ||
| 2 | 63 | 7.1 | 5.8 | 4.7 | 3.8 | ||
| 2.5 | 75 | 8.4 | 6.8 | 5.6 | 4.5 | ||
| 3 | 90 | 10.1 | 8.2 | 6.7 | 5.4 | 4.3 | |
| 4 | 110 | 12.3 | 10 | 8.1 | 6.6 | 5.3 | 4.2 |
| 5 | 125 | 14 | 11.4 | 9.2 | 7.4 | 6 | 4.8 |
| 5 | 140 | 15.7 | 12.7 | 10.3 | 8.3 | 6.7 | 5.4 |
| 6 | 160 | 17.9 | 14.6 | 11.8 | 9.5 | 7.7 | 6.2 |
| 7 | 180 | 20.1 | 16.4 | 13.3 | 10.7 | 8.6 | 6.9 |
| 8 | 200 | 22.4 | 18.2 | 14.7 | 11.9 | 9.6 | 7.7 |
| 8 | 225 | 25.2 | 20.5 | 16.6 | 13.4 | 10.8 | 8.6 |
| 10 | 250 | 27.9 | 22.7 | 18.4 | 14.8 | 11.9 | 9.6 |
| 11 | 280 | 31.3 | 25.4 | 20.6 | 16.6 | 13.4 | 10.7 |
| 12 | 315 | 35.2 | 28.6 | 23.2 | 18.7 | 15 | 12.1 |
| 14 | 355 | 39.7 | 32.2 | 26.1 | 21.1 | 16.9 | 13.6 |
| 16 | 400 | 44.7 | 36.3 | 29.4 | 23.7 | 19.1 | 15.3 |
| 18 | 450 | 50.3 | 40.9 | 33.1 | 26.7 | 21.5 | 17.2 |
| 20 | 500 | 55.8 | 45.4 | 36.8 | 29.7 | 23.9 | 19.1 |
| 22 | 560 | 62.5 | 50.8 | 41.2 | 33.2 | 26.7 | 21.4 |
| 24 | 630 | 70.3 | 57.2 | 46.3 | 37.4 | 30 | 24.1 |
| 28 | 710 | 79.3 | 64.5 | 52.2 | 42.1 | 33.9 | 27.2 |
| 32 | 800 | 89.3 | 72.6 | 58.8 | 47.4 | 38.1 | 30.6 |
| 36 | 900 | 81.8 | 66.2 | 53.3 | 42.9 | 34.4 | |
| 40 | 1000 | 90.2 | 72.5 | 59.3 | 47.7 | 38.2 | |
| 48 | 1200 | 88.2 | 67.9 | 57.2 | 45.9 | ||
| 55 | 1400 | 102.9 | 82.4 | 66.7 | 53.5 | ||
| 60 | 1500 | 110.2 | 88.2 | 71.4 | 57.6 | ||
| 65 | 1600 | 117.6 | 94.1 | 76.2 | 61.2 |
Advantage
1. Excellent corrosion resistance, better hygiene performance and
longer service life
2. Unique flexibility and excellent scratch resistance
3. Very outstanding low temperature resistance
4. Good fracture toughness with rapid crack growth
Details
Application
The materials used in HDPE pipes are mainly polyvinyl chloride (PVC), polyethylene (PE) and polypropylene (PP). Compared with other plastic pipes (such as PVC), high-density polyethylene (HDPE) pipes have the characteristics of low density, good toughness, corrosion resistance, good insulation performance, easy construction and installation, and are widely used in municipal and building water supply and drainage, gas , heating and heating, wire and cable threading, agricultural water-saving irrigation and other fields.
Certificate
Company Profile
High Mountain Technology Co., Ltd. is committed to manufacturing and selling various plastic pipes, fittings, valves and related plumbing fixtures, providing professional solutions for plumbing systems. The manufacturing and sales of our main products, PE water supply pipes and HDPE drainage pipes, are in a leading position in the industry.
With the first class experimental equipment, analytical instruments and highly qualified technical personnel, which are capable to conduct a comprehensive checking for all the specification and strictly control each procedure to ensure the reliability and stability of our product.
FAQ
Q: Why choose us?
A: We are a professional manufacturer with competitive price,
excellent quality and fast delivery time.
Q: What is your minimum order quantity?
A: Accessories: one box or one bag.
Pipeline: 200~5000 meters/size, depending on different sizes.
Q: After reading your FAQ, I am very satisfied. How can I start
buying my order?
A: Please contact our sales manager by email or phone, thank you.
